• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.9
• /
• pp.552-558
• /
• 2016

Goethite, ${\alpha}$-FeOOH have various applications such as absorbent, pigment and source for magnetic materials. Goethite particles were synthesized in a two step process, where $Fe(OH)_2$ were synthesized in nitrogen atmosphere using $FeSO_4$ as a raw material in the first process, and after that acicular goethite particles were obtained in an air oxidation process of $Fe(OH)_2$ in highly alkaline aqueous solution. Their phase and microstructure were investigated with XRD and FE-SEM. It was found that the morphology of goethite and the ratio of length-to-width (aspect ratio) of acicular goethite are dependent on the some factors such as R value ($OH^-/Fe^{2+}$), air flow rate and pH conditions. In particular, R value has the strongest influence on the synthesized goethite morphology. It is considered that the optimal value R is 4.5 because X-ray diffraction peaks of goethite have the highest intensity at that value. Morphology of goethite particles was controlled by air flow rates, showing that their size and aspect ratio are getting smaller and decrease, respectively as air flow rate increases. The largest goethite particle obtained is about 1,500 nm in length and 150 nm in diameter.

• Journal of Environmental Science International
• /
• v.31 no.7
• /
• pp.569-577
• /
• 2022

This study aimed to evaluate the growth of Cichorium intybus, Brassica juncea, and Lactuca sativa at varying seed ratios, and to suggest an efficient management plan for sustainable indoor agriculture systems. It was treated with mixed sowing as follows: 30 chicory seeds (chicory alone: CC), 22 chicory seeds + 8 lettuce seeds (C₃L₁), 20 chicory seeds + 10 lettuce seeds (C₂L₁), 15 chicory seeds + 15 lettuce seeds (C₁L₁) as intraspecies, and 30 mustard seeds (mustard alone: MC), 22 mustard seeds + 8 lettuce seeds (M₃L₁), 20 mustard seeds + 10 lettuce seeds (M₂L₁), 15 mustard seeds + 15 lettuce seeds (M₁L₁) as interspecies. The study identified the competitive response in seed germination between Cichorium intybus and Lactuca sativa, and in the C₃L₁ experimental group, Lactuca sativa had the highest leaf length, root length, chlorophyll content, and fresh weight. Therefore, the higher the ratio of Cichorium intybus, the higher the growth and productivity of Lactuca sativa; however, higher the ratio of Lactuca sativa, the lower the growth of Cichorium intybus. Furthermore, the nitrogen and potassium content in the substrate was the highest in the C₃L₁ experimental grorp which had the highest seeding rate of the Cichorium intybus. Comparing the groups Brassica juncea and Lactuca sativa, the higher the seeding ratio of Lactuca sativa, the higher the growth and productivity of Brassica juncea. Therefore, a companion seeding of Brassica juncea and Lactuca sativa is beneficial; this could be effective in having a high seeding ratio of Lactuca sativa.

• Journal of the Korea Convergence Society
• /
• v.6 no.1
• /
• pp.103-108
• /
• 2015

This paper investigate the determinants of investment for a cross-section of firms in emerging market. I examine three factors expected to affect investment: debt ratio, growth rate, and industry. I find that debt ratio and ICT firms are positively associated with investment in emerging market. I also find that ICT firms with high debt ratio have higher net capital expenditures. While the growth rate is unrelated to net capital expenditures. Unlike the evidence from the developed markets, debt ratio has significant and positive impact on investment (net capital expenditures) in the emerging market.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.3
• /
• pp.161-168
• /
• 2010

Recently, bridges have been momenttous as not only regarding function but also concerning aesthetics. However, when beauty is considered in the bridge, it is also essential that stability and economics be considered. Besides, when considering stability, an arch bridge is one of the most stable structures. The most important element is a rise ratio when regarding beauty and economics of arch bridges. The effect of dead load and DB24 load have been considered to decide proper rise ratio. Therefore, in this study, examined the value of moment, displacement and member forces, in the variation of the rise ratio of arch bridges. The most optimum shape of Nielsen arch bridges has determined by analyzing member forces, moments and displacement with parameters of rise ratio and angle of vertical members. By comparison between values, the hanger types have been also considered to derive the optimum shape of Nielsen arch bridge.

• Composites Research
• /
• v.27 no.4
• /
• pp.168-173
• /
• 2014

The optimum condition of glass fiber/epoxy composites was investigated according to mixing ratio of two epoxy matrices. Novolac type epoxy and isocyanate modified epoxy were used as composites matrix. Based on chemical composition of mixing matrix, optimum mixing ratio of epoxy resins was obtained through various experiments. In order to investigate thermal stability and interface of epoxy resin, glass transition temperature was observed by DSC instrument, and static contact angle was measured by reflecting microscope. Change of IR peak and $T_g$ was conformed according to different epoxy mixing ratio. After fabrication of glass fiber/epoxy composites, tensile, compression, and flexural properties were tested by UTM by room and high temperature. The composites exhibited best mechanical properties when epoxy mixing ratio was 1:1.

• Communications for Statistical Applications and Methods
• /
• v.17 no.2
• /
• pp.223-229
• /
• 2010

We consider the asymptotic results of the variance ratio statistic when the underlying processes have moving average(MA) unit roots. This degenerate situation of zero spectral density near the origin cause the limit of the variance ratio to become zero. Its asymptotic behaviors are different from non-degenerating case, where the convergence rate of the variance ratio statistic is formally derived.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.392-397
• /
• 2018

In this paper, the ZnS nanoparticles were synthesized according to the process conditions of hydrothermal synthesis. When the molar ratio of Zn to S was 1:1.2, it was confirmed that it had a cubic single phase and a high crystal phase. After the molar ratio is fixed, hydrothermal synthesis was conducted at $180^{\circ}C$ for 24, 36, 72 and 96 h in order to confirm the structural change with the change of hydrothermal synthesis times. As the hydrothermal synthesis times increased, the particle size increased. The hydrothermal synthesized particle size for 72 h was considered to be suitable for sintering. The ZnS ceramic had a density of 99.7% and an excellent transmittance of ~70% in the long-wavelength region.

• ETRI Journal
• /
• v.26 no.1
• /
• pp.13-20
• /
• 2004

We propose a new optical code division multiple access (OCDMA) scheme for reducing multiple access interference (MAI) and enhancing performance for optical subscriber access networks using modified pseudorandom noise (PN)-coded fiber Bragg gratings with bipolar OCDMA decoders. Through the bipolar OCDMA decoder and the modified PN codes, MAI among users is effectively depressed. As the data are encoded either by a unipolar signature sequence of the modified PN code or its complement according to whether the data bit is 1 or 0, the bit error ratio (BER) can be more improved with the same signal to interference plus noise ratio over the conventional on-off shift keying-based OCDMA system. We prove by numerical analysis that the BER of the proposed bipolar OCDMA system is better than the conventional unipolar OCDMA system. We also analyze the spectral power distortion effects of the broadband light source.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.5
• /
• pp.157-165
• /
• 2017

The high-pressure resin transfer molding (HP-RTM) technology has been commercialized for fast production of fiber reinforced composite materials. The high-pressure mixing head was one of the most core component of the HP-RTM process. In this study, a mixing head was systematically designed, manufactured and evaluated. This mixing head was composed of a nozzle, a mixing chamber, a cleaning piston part, and an internal mold release part. In actual, a straight-type structure was newly designed instead of the conventional L-type structure for improving the maximum mixing pressure and mixing ratio precision. The performance of mixing head was showed maximum mixing pressure of 15.22MPa and mixing ratio precision of 0.12%. CFRP molding experiments were successfully obtained a 6~11 laminating carbon sheet using HP-RTM presses and specimen molds.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.537-550
• /
• 2018

The development focus of a smart city has been changed gradually from a physical development aspect to a space development aspect. In a space development aspect, the major application technologies are Environment Technology (ET), Information Technology (IT) and Environment Information Technology. On the other hand, it is unclear if the space convergence in a smart city has been changed by the 3 technologies. Therefore, specific analysis was performed on the convergence change of smart city 4 spaces (District, Street, Building, Facility) using the 3 technologies. The convergence distribution ratio according to the periods (period 1 : 1972~1999, period 2 : 2000~2009, period 3 : 2010~2017) among the spaces, ET (Environment Technology), IT (Information Technology), ET+IT (Environment Information Technology) in a smart city were examined. The smart city was high in the order of 'District (53/43%) - Building (36/29.1%) - Street (22/17.9%) - Facility (12/10.0%)' in the number of applications and ratio of convergence (Technology Convergence) at Period 1 (1972~1999). The smart city was high in the order of 'District (223/32.4%) - Building (197/28.6%) - Street (195/28.3%) - Facility (74/14.8%)' in the number of applications and ratio of convergence (Technology Convergence) at Period 2 (2000~2009). At period 3, the District (467/33%) was also the highest. On the other hand, the street (384/27.4%) was higher than the building (361/25.8%) and facility (188/13.4%) in smart city space. Fourth, the smart city was high in the order of 'District - Building - Street - Facility' in the number of applications and ratio of convergence (Technology Convergence) at Periods 1 (1972~1999) and 2 (2000~2009). In contrast, the average of number was high in the order of 'Building - Street - District - Facility'. At period 3(2010~2017), the number of applications and the ratio of convergence was high 'District - Street - Building - Facility'; the average of number was the same as in period 1 and 2. As a result, smart city space has been changed by the development of macroscopic urban spaces in the initial stage. Since then, district space-centric development and building space are confused with devices/technologies and changed for citizen inflow. The building space has evolved continually and smart city space will be expected to revitalize the street space connecting completed buildings.