• ETRI Journal
• /
• v.33 no.6
• /
• pp.887-896
• /
• 2011

We investigated the effects of a gate dielectric and its solvent on the characteristics of top-gated organic field-effect transistors (OFETs). Despite the rough top surface of the inkjet-printed active features, the charge transport in an OFET is still favorable, with no significant degradation in performance. Moreover, the characteristics of the OFETs showed a strong dependency on the gate dielectrics used and its orthogonal solvents. Poly(3-hexylthiophene) OFETs with a poly(methyl methacrylate) dielectric showed typical p-type OFET characteristics. The selection of gate dielectric and solvent is very important to achieve high-performance organic electronic circuits.

• Journal of Agricultural Extension & Community Development
• /
• v.28 no.4
• /
• pp.203-213
• /
• 2021

This study aimed to examine the policy priorities to enhance the service quality of the agro-healing for mental health care using Importance-Performance Analysis (IPA). The subjects were 67 people working in mental health institutions. The result of the IPA for the design of the agro-healing policy, in a total of 5 policy areas, the importance and performance were found to be 'above average', and it was confirmed that 'Keep up the Good Work' level. This is thought to have had a positive effect on raising the policy awareness of experts in mental health related institutions as the government's support for agro-healing and R & D increased according to the enactment of the act. Therefore, the results of this study provided basic information on the development and revitalization of agro-healing service quality for mental health care.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.186-205
• /
• 2019

Intercell interference coordination (ICIC) is considered as a promising technique to increase the spectral efficiency of OFDMA cellular systems. The soft frequency reuse (SFR) and fractional frequency reuse (FFR) are representative and efficient management techniques for ICIC. Herein, to enhance the performance of the SFR scheme, we propose a call admission (CAC) scheme. In this CAC scheme, called Spectrum handoff-SFR(S-SFR), the spectrum handoff technique is applied to the user equipment (UE) located near the cell center. We derive the traffic analysis model to describe the S-SFR. In addition, a two-dimensional (2-D) Markov chain and an outage analysis are used in our analytical model. From the traffic analysis, the significant performance measures are the outage probability, call blocking probability, system throughput and resource utilization. Based on those, the outage probability and system throughput are obtained using resource utilization as an interference pattern. The analytical results are verified with computer simulation results. Finally, we compare our proposed scheme with other ICI schemes.

• International journal of advanced smart convergence
• /
• v.8 no.1
• /
• pp.65-74
• /
• 2019

3D file formats typically include OBJ (Wavefront file format), STL (STereoLithography), and FBX (Filmbox). Each format has limitations depending on its configuration and usage, and supported formats are different depending on the software application. glTF helps uniform integration of 3D file formats and allows for more efficient transmission of large 3D geometry files by organizing them in a binary format. This paper presents explanation on OBJ, FBX, and STL which are major examples of existing 3D file formats. It also explains the concept and characteristics of glTF and compares its performance with other 3D file formats on the web. The loading time and packets of each 3D file format are measured according to the web browser environment by means of Google Chrome, Firefox and Microsoft Edge. Experimental results show that glTF is the most efficient and that it exhibits the best performance. As to STL, relatively excessive traffic was observed. This study is expected to contribute to reducing rendering time on the web as 3D file formats are used.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.5
• /
• pp.367-375
• /
• 2022

Generally, a proportional-resonant controller is used to eliminate steady-state errors during the voltage-current control of a double-conversion uninterruptible power supply (UPS) in a stationary reference frame. Additionally, the feed-forward control compensating for the load current, which can be considered a disturbance of the voltage controller, can be used to improve the disturbance rejection performance. However, during the parallel operation of UPSs, circulating current can occur between UPS modules when performing both feed-forward control and droop control because feed-forward control reduces the circulating current impedance. This study proposes a feed-forward compensation technique that considers the impedance of circulating current. An additional feed-forward compensation technique is developed to enhance the disturbance rejection performance. The validity of the proposed feed-forward compensation technique is verified by the experiment results of the parallel operation of a 500 W double-conversion UPS module.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.665-666
• /
• 2015

Recently BIM technology has been expanded for using in construction project. However its spread has been delayed than the initial expectations, due to the high-cost of BIM infrastructure development, the lack of regulations, the lack of process and so forth. In construction site phase, especially the analysis of current research trend about IT technologies, virtualization and BIM service, data exchange such as drawing, 3D model, object data, properties using cloud computing and virtual server system is defined as a most successful solution. The purpose of this study is enable the cloud computing BIM server to provide several main function such as edit a model, 3D model viewer and checker, mark-up, snapshot in high-performance quality by proper design of VDI system. Concurrent client connection performance is a main technical index of VDI. Through test-bed server client, developed VDI system's multi-connect control will be evaluated. The performance-test result of BIM server VDI will effect to development direction of cloud computing BIM service for commercialization.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.908-909
• /
• 2023

Recently, several generative models have emerged and are being used in various industries. Among them, Cycle GAN is still used in various fields such as style transfer, medical care and autonomous driving. In this paper, we propose two methods to improve the performance of these Cycle GAN model. The ReLU activation function previously used in the generator was changed to Leaky ReLU. And a new loss function is proposed that considers the semantic level rather than focusing only on the pixel level through the VGG feature extractor. The proposed model showed quality improvement on the test set in the art domain, and it can be expected to be applied to other domains in the future to improve performance.

• Journal of the Korean Society of Industry Convergence
• /
• v.1 no.1
• /
• pp.7-9
• /
• 1998

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.746-748
• /
• 1988

A way of improving the transient performance is suggested for a class of model reference adaptive control systems. To increase the convergence rate of a model following error, an error feedback term is incorporated into the control law.

• International Area Studies Review
• /
• v.22 no.4
• /
• pp.145-166
• /
• 2018

This study is due to global competition, the wall between regions is disappearing, customer needs are diversified, and market and technology are rapidly changing. Future growth engines, the importance of convergence capabilities for industrial competitiveness is being emphasized more. Therefore, companies should seek innovative means to increase the efficiency of the company by establishing optimized global management environment and establishing direction and strategy for utilization of convergence technology by improving industrial competitiveness. Firms must adopt and utilize related new technologies by strengthening their convergence capabilities through dynamic capabilities that are internal resource bases for new product development and process innovation. Globalize markets and technologies can expect higher innovation performance when aligning strategic direction with formalized technology competencies held by the firm and incorporating the convergence capabilities needed for technological innovation into processes. The study focuses on the effects of market and technology orientation on technological innovation performance, whether dynamic and convergence capabilities affect technological innovation performance, and dynamic and convergence capabilities to mediate between market and technology orientation. For the study, we surveyed 51.4% of global and multinational corporations that are internationally active or headquartered overseas. Based on the previous studies, hypotheses were established and the collected data were analyzed through utilization path analysis and Sobel test.