• Journal of Construction Engineering and Project Management
• /
• 제4권3호
• /
• pp.21-32
• /
• 2014

The practiced conventional methods for maintenance management in Malaysian Polytechnic faced many issues due to poor service delivery, inadequate finance, poor maintenance plan and maintenance backlogs. The purpose of this study is to improve the conventional method practices which tend to be ineffective in Malaysian Polytechnic. The case studies were conducted with eight Polytechnics and are selected based on conventional method practices and its major problems. There are around 32 Polytechnics in Malaysia and almost are using conventional methods. The number is considered very big indicating that the use of modern Information and Communication Technology (ICT) is still very limited compared to other institutions of higher learning in Malaysia. The overall findings of this research indicated; poor service delivery, inadequate financial, poor maintenance planning and maintenance backlogs. There is also need to overcome less man power competencies of maintenance management practices which existed with all eight Polytechnics. The proposed system is intended to be used for maintenance management practices at Malaysian Polytechnics in order to provide high-quality of building facility with safe and healthy environments.

• 한국균학회지
• /
• 제9권3호
• /
• pp.117-122
• /
• 1981

본연구(本硏究)는 노동비(勞動費), 광열비(光熱費)의 다량(多量) 소모(消耗)와 높은 생산비투여(生産費投與)를 요비(要求)하는 한국(韓國)의 단순재배체계(單純栽培體系)를 개선(改善)할 수 있는 방법(方法)으로서 tunnel system을 개발실용화(開發實用化)하기 위(爲)하여 실시(實施)하였다. 1. Tunnel system은 후발효(後醱酵) 중(中)의 배지(培地) 및 공기온도(空氣溫度)를 관행방법(慣行方法)보다 정확(正確)히 조절(調節)하므로 배지(培地)와 공기온도(空氣溫度)의 편차(偏差)를 $2^{\circ}C$ 이내(以內)로 좁힐 수 있었다. 2. Tunnel system은 후발효시(後醱酵時) 가온(加溫)없이 퇴비자체열(堆肥自體熱)을 이용(利用)할 수 있었으므로 고압(高壓)스팀 보이라 사용(使用)으로 인(因)한 다량(多量)의 연료투입(燃料投入)이 불필요(不必要)하였다. 3. Tunnel 후발효시(後醱酵時) 퇴비(堆肥)의 전실소(全室素) 및 수분함량(水分含量)은 관행방법(慣行方法)보다 높았고, 배지(培地)의 암모니아 태실소(態室素) 잔류량(殘留量) 은 300ppm 이하(以下)로 양질(良質)의 배지(培地)를 제조(製造)할 수 있었다. 4. Tunnel system으로 제조(製造)한 퇴비배지(堆肥培地)에 균사(菌絲)를 배양(培養)할 때 관행방법(慣行方法)과 차이(差異)가 없었고 균사생장(菌絲生長) 중(中) 가온(加溫)이 불필요(不必要)하였다. 5. 자실체수량(子責體收量) 및 개체중(個體重)은 tunnel system이 관행방법(慣行方法)보다 높아서 본(本) 방법(方法)은 한국(韓國)에서 채용(採用)할 수 있는 재배체계(栽培體系)임이 입증(立證)되었다.

• Journal of electromagnetic engineering and science
• /
• 제12권1호
• /
• pp.70-76
• /
• 2012

We compare the detection probabilities of the time-reversal(TR) detection system and the conventional radar system. The target is assumed to be hidden inside a random medium such as a forest. We propose a TR detection system based on the SAR(Synthetic Aperture Radar) algorithm. Unlike the conventional SAR images, the proposed TR-SAR system has an interesting property. Specifically, the target-related signal components due to the time-reversal refocusing characteristics, as well as some of clutter-related signal components are concentrated at the time-reversal reference point. The remaining clutter-related signal components are scattered around that reference point. In this paper, we model the random media as a collection of point scatterers to avoid unnecessary complexities. We calculate the detection probability of the TR radar system based on the proposed simple random media model.

• 소음진동
• /
• 제11권1호
• /
• pp.49-56
• /
• 2001

In this paper, two plant models, of which one is newly developed and the other one is the conventional one, of the focus servo system of DVD drive are presented and a two-degree-of freedom controller consisted of Inverse dynamics feedforward and LQG/LTR feedback controller is designed. The newly developed plant model is used to design the feedforward controller and the conventional model is used for the design of feedback controller. The output of newly developed model is the displacement of objective lens and the output of conventional model is the focus error of the DVD focus servo system. The displacement of the objective lens is estimated by the dynamics model of the DVD focus servo system. The disturbance rejection performance of the two-degree-of freedom controller is compared with that of an LQG/LTR one.

• 대한기계학회논문집
• /
• 제16권8호
• /
• pp.1595-1602
• /
• 1992

An energy efficient drying system, utilizing a heat pump to recover the wasted heat with high efficiency is proposed. In conventional drying systems, over-heating occurs through a condenser as the same amount of air is provided into the evaportator and the condenser. In order to prevent the over-heating, part of the outlet air from the drying chamber must be bypassed to increase the rate of vaporization in the drying chamber without release of the heat from the system. Since a part of the heat in the condenser is used to heat the air during the drying process of the proposed system, a high drying efficiency and low SPC(Specific Power Consumption) could be obtained, Comparing the performances between the proposed heat pump and a conventional one, it was found that the drying efficiency of the proposed heat pump is higher than that of the conventional heat pump by an amount of 7-25%.

• 음성과학
• /
• 제3권
• /
• pp.50-56
• /
• 1998

Frequency transposition (FT) hearing system was designed for individuals with little or no residual hearing at high frequencies. This device compresses and shifts the wide-band, high frequency acoustic energy where important features for speech perception are concentrated to the audible, lower range of frequencies. The usefulness of the FT system was investigated for 12 patients (7 children and 5 adults) with severe-to-profound sensorineural hearing losses compared with conventional hearing aids. Results suggest that the hearing impaired can benefit from the FT system with appropriate selection criteria and auditory (re)habilitation program.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1297-1302
• /
• 2004

CBTC(Communication Based Train Control) System has many superior train control performances than conventional track-circuit-based train control system with higher train operation efficiency, and less installation and maintenance cost. It is expected that CBTC will replace the conventional train control systems in near future. As CBTC has different mechanisms from conventional track-circuit-based train control systems in identifying train positions, and communicating information between train and ground facility, we have to pay a earful attention to making the interface between CBTC equipments and other signalling devices. This paper provides the construction of the interface between CBTC equipment and other signalling equipments such as TTC(Total traffic Control) system. ATO. electronic interlocking devices.

• 제어로봇시스템학회논문지
• /
• 제6권9호
• /
• pp.822-830
• /
• 2000

A conventional advanced control algorithm is proposed in this paper for improved temperature regulation of a TV-glass melting furnace. The TV-Glass melting furnace is a typical MIMO(Multi-Input Multi Output) system which is subject to various thermal disturbances. Because of its complexity, a detailed mathematical model of the furnace is hard to establish. To design a temperature control control system of the furnace, major input-output variables are selected first, and simple FOPDT(First Order Plus Dead Time) models are established based on the physical meaning and experimental process data. Based on the FOPDT models, a multi-loop control system composed of cascade and single loops are designed for effective control of the MIMO system. Practical implementation on the 150 ton/day furnace using the DCS(Distributed Control System) showed that the proposed control technique performs better than manual control.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.595-598
• /
• 1999

A new of the automotive High Intensity Discharge(HID) lamp ballast systems is proposed. Proposed scheme is consisted of the high frequency DC-DC converter and low frequency DC-AC inverter as same as conventional HID ballast system. But this system separates ignition voltage from dc link voltage, which results to used the lower voltage rating power devices for HID lamp ballast system compared with conventional system. As a result, proposed system has a lower cost and higher efficiency.

• 한국식품저장유통학회지
• /
• 제4권2호
• /
• pp.101-113
• /
• 1997

Temperature, relative humidity and ventilation are closely related one another, and they are the main factors to be controlled for the environmental control system of a storage facility. Conventional environmental control systems do not consider the interrelationship between temperature, relative humidity and ventilation, which results in low performance and high energy consumption. To overcome the inefficiency of the conventional ones, it was developed an on-off control system based on the interrelationship between the factors. The usefulness of the system was illustrated with the results produced by a set of experiments in a real world.