• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.644-651
• /
• 2005

The purpose of this paper is to compare the control effect of toggle brace system having amplifying displacement mechanism with that of conventional brace system when the identical MR damper is applied to each system. The force-displacement and lone-velocity relationships of MR damper are obtained using harmonic load test and the analytical model for MR damper is presented. White noise excitation tests of a single degree of freedom system with MR-toggle brace system and MR-chevron system are conducted and the transfer functions of the systems are compared. Test results show that the control effect of the toggle system is superior to that of the conventional brace system.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.6
• /
• pp.67-79
• /
• 1982

The stability of general pulse-width modulation system with Gaussian random disturbance was discussed . General system is divided into nonlinear and linear elements using the conventional describing function method. The concept of the equivalent admittance was used to find the transfer characteristic of the nonlinear element of the system. In this paper the self-sustained oscillation condition in the autonomous system was derived and the results was analyzed with computer simulation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.11
• /
• pp.3091-3097
• /
• 1994

An expert system for NC part programming of NC lathe (ESPP-1) is developed as a part of Computer-Adied Manufacturing system. Conventional computer-assisted part programming system essentially requires an NC part programmer who is an expert in NC part programming. But the developed ESSP-1 can allow an inexperienced person to make an excellent NC data for the NC Lathe without any problem, since the system has a knowledge base composed of EIA and ISO NC code, feed rate, spindle speed, machining coordinates selection, and tool selection etc., which were directly evoked from some skilled NC part programmers, and referenced some machining handbooks. This paper discusses the algorithm of the expert system for NC part programming of the NC lathe (ESPP-1) and the performance comparisons between the developed expert system and the conventional system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.3
• /
• pp.240-246
• /
• 2002

Bypass air conditioning systems are divided into three types; an outdoor air bypass, a mixed air bypass and a return air bypass system. What makes the return air by pass system more effective is that it directs all of moist outdoor air through the cooling coil. The bypass air conditioning system can maintain indoor R.H (Relative Humidity) less than a conventional CAV (Constant Air Volume) air conditioning system by adjusting face and bypass dampers at part load. When a design sensible load (the ratio of sensible load to total sensible load) is 70 percent (at this time, RSHF (Room Sensible Heat Factor) . 0.7), indoor R.H was maintained 59 percent by the return air bypass system, but 65 percent by the conventional CAV air conditioning system (valve control system). The bypass air conditioning system can also improve IAQ (Indoor Air Quality) in many buildings where the number of air change is high.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.4
• /
• pp.289-296
• /
• 2012

The aim of this study is to investigate the performance of a heating and cooling system with aquifer thermal energy storage(ATES heat pump system) known as one of the underground thermal energy storage application systems. The ATES system was composed of heat pump unit and ATES, which was installed in a factory building located in Anseoung. The system represented very high heating and cooling performance, and showed nearly constant COP at each heating and cooling season due to the stability of EWT. The economic analysis about an ATES system and a conventional system was also executed. The conventional system adopted an air-conditioner in the summer season and a LNG boiler in the winter season. The payback period of the ATES system was estimated by 6.62 years.

• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.773-782
• /
• 2004

The objective of this work was to establish an approaching method for TMR feeding system in the farm situation by testing the effects of herd-mix feeding system on the performance of lactating cows. Fifty six Holstein cows were fed for the experimental period of 16 months. Prior to test the herd-mix feeding system, animals were kept on conventional feeding system for 4 months, separate feeding of forage with concentrate, then provided 3 types of herd-mix rations formulated by mean level of energy concentration requirement of higher 1/2 ranker in each herd for remaining 12 months to compare the effect on milk yield performance of animals with conventional feeding system by using a switch-over method. The herd-mix feeding system influenced substantially upon the improvements of milk yield(P<0.01) and milk fat percentage(P<0.05). In all of lactational ages, milk yield and milk fat were enhanced by the herd-mix feeding system. Especially, actual milk yield(AMY) and milk fat in the 1st lactating cows, and AMY and 4.0% fat corrected milk yield(FCM) in the 2nd lactating cows were increased signiticantly by the herd-mix feeding system(P<0.05). In the early and mid-stage of lactation, the herd-mix feeding system showed higher AMY and FCM compared with the conventional feeding system although the milk fat was not different. AMY, milk fat and FCM in the late-stage of lactation were increased generally by the herd-mix feeding system. Especially, milk fat and FCM obtained by the herd-mix feeding system were significantly higher than those by the conventional feeding system(P<0.01). The herd-mix feeding system showed a good type of milking curve with a higher persistency of FCM(93.24%) than in conventional one(92.69%). The income over feed cost with the herd-mix feeding system was lA-fold higher than that with the conventional feeding method. In conclusion, the results of this work suggest that the herd-mix feeding system based on a correct level of energy concentration of TMR and well-determined feed ingredients increases not only milk yield of dairy herd by enhancing the performance of cows in early to mid stage of lactation with improved milk persistency but also gross income of dairy farm.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.4
• /
• pp.73-80
• /
• 2003

In this paper, we propose a ETD-turbo code(Enhanced Time Diversity turbo code) which is a novel turbo code configuration to increase the time diversity effect and analyze the performance of ETD-turbo coded MC-CDMA system. The ETD-turbo code, which is added another interleaver to the conventional turbo code structure, is consisted. Time diversity effect of the ETD-turbo code is improved by every parity bits converted into interleaver pattern. In order to the performance of the ETD-turbo code, we conduct a computer simulation about interleaver type. And we make comparison between the performance of ETD-turbo coded MC-CDMA system and the conventional turbo coded MC-CDMA system. By the simulation results, ETD-turbo code has less BER than the conventional turbo code and time delay is decreased by reducing iteration numbers. Therefore, it is defined that the performance of ETD-turbo coded MC-CDMA system is improved than the conventional turbo coded MC-CDMA system.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.2
• /
• pp.18-28
• /
• 2012

This study was to develop a novel automatic system for measuring St$\ddot{o}$ckigt sizing degree and contact angle at a time. The conventional methods to measure sizing degree had serious problems in obtaining significant differences according to different dosages of a sizing agent, and moreover they disclosed unique limitation due to liquid types used and tester's subjectivity. However, the newly developed system could get reproducible results through total automation of all procedures including liquid dropping, image acquisition and measurement of both St$\ddot{o}$ckigt sizing degree and contact angle. For the St$\ddot{o}$ckigt sizing test, the automatic system could measure sizing degree with more definite differences according to different dosage of AKD, compared to the conventional method. For the contact angle test, the automatic system showed a similar trend to the conventional method but had smaller contact angles due to distortion of an image focus by a sheet curl than the conventional testing machine. The problem from the image out of focus due to specimen curl will be overcome with adopting a new specimen holder for the future system.

• The korean journal of orthodontics
• /
• v.48 no.5
• /
• pp.292-303
• /
• 2018

Objective: Biplanar imaging systems allow for simultaneous acquisition of lateral and frontal cephalograms. The purpose of this study was to compare measurements recorded on three-dimensional (3D) cephalograms constructed from two-dimensional conventional radiographs and biplanar radiographs generated using a new biplanar imaging system with those recorded on cone-beam computed tomography (CBCT)-generated cephalograms in order to evaluate the accuracy of the 3D cephalograms generated using the biplanar imaging system. Methods: Three sets of lateral and frontal radiographs of 15 human dry skulls with prominent facial asymmetry were obtained using conventional radiography, the biplanar imaging system, and CBCT. To minimize errors in the construction of 3D cephalograms, fiducial markers were attached to anatomical landmarks prior to the acquisition of radiographs. Using the 3D $Ceph^{TM}$ program, 3D cephalograms were constructed from the images obtained using the biplanar imaging system (3D $ceph_{biplanar}$), conventional radiography (3D $ceph_{conv}$), and CBCT (3D $ceph_{cbct}$). A total of 34 measurements were obtained compared among the three image sets using paired t-tests and Bland-Altman plotting. Results: There were no statistically significant differences between the 3D $ceph_{biplanar}$ and 3D $ceph_{cbct}$ measurements. In addition, with the exception of one measurement, there were no significant differences between the 3D $ceph_{cbct}$ and 3D $ceph_{conv}$ measurements. However, the values obtained from 3D $ceph_{conv}$ showed larger deviations than those obtained from 3D $ceph_{biplanar}$. Conclusions: The results of this study suggest that the new biplanar imaging system enables the construction of accurate 3D cephalograms and could be a useful alternative to conventional radiography.

• Radiation Oncology Journal
• /
• v.32 no.4
• /
• pp.221-230
• /
• 2014

Purpose: To evaluate the risk of vertebral compression fracture (VCF) after conventional radiotherapy (RT) for colorectal cancer (CRC) with spine metastasis and to identify risk factors for VCF in metastatic and non-metastatic irradiated spines. Materials and Methods: We retrospectively reviewed 68 spinal segments in 16 patients who received conventional RT between 2009 and 2012. Fracture was defined as a newly developed VCF or progression of an existing fracture. The target volume included all metastatic spinal segments and one additional non-metastatic vertebra adjacent to the tumor-involved spines. Results: The median follow-up was 7.8 months. Among all 68 spinal segments, there were six fracture events (8.8%) including three new VCFs and three fracture progressions. Observed VCF rates in vertebral segments with prior irradiation or pre-existing compression fracture were 30.0% and 75.0% respectively, compared with 5.2% and 4.7% for segments without prior irradiation or pre-existing compression fracture, respectively (both p < 0.05). The 1-year fracture-free probability was 87.8% (95% CI, 78.2-97.4). On multivariate analysis, prior irradiation (HR, 7.30; 95% CI, 1.31-40.86) and pre-existing compression fracture (HR, 18.45; 95% CI, 3.42-99.52) were independent risk factors for VCF. Conclusion: The incidence of VCF following conventional RT to the spine is not particularly high, regardless of metastatic tumor involvement. Spines that received irradiation and/or have pre-existing compression fracture before RT have an increased risk of VCF and require close observation.