• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.265-274
• /
• 2011

In this paper, it is studied on wide radiating slot antenna's miniaturization for ultra wide-band(UWB) technologies and notch structure to prevent interference between UWB systems and existing wireless systems for using Wi-Fi service of IEEE standards 802.11 a/n. Proposed antenna that wide slot is decreased from $\lambda/2$ to $\lambda/4$ length of resonant frequency has decreased by 72 % compared with conventional antenna. And optimized T-shaped CPW-fed stub has satisfied UWB bandwidth for 3.0~11.8 GHz. Then, creating 2-order Hilbert curve slot line in the stub's patch area, 4.9~5.6 GHz that centered frequency is 5 GHz is eliminated. Finally, the designed antenna constructed on FR4-epoxy has $20{\times}15\;mm^2$ dimension. The measured results that are obtained return loss under -10 dB through 3.2~11.8 GHz without Wi-Fi bandwidth, a linear phase characteristic, a stable group delay, and omnidirectional radiation patterns are presented.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.118-118
• /
• 2003

The occurrence of Fusarium wilt in strawberry fields in Korea was assessed from 2001 to 2003. Fusarium wilt was found from June to August in nursery beds, from September to October after planting in production beds, and from January to March during harvest. The symptoms seen were root rots, discolored vascular tissue in the crown and deformation and yellowing of central leaflets. The disease occurred in up to 30％ of plants in 37 of 214 fields surveyed. Fusarium of sporum Schlecht. ex Fr. f. sp. fragariae was frequently isolated from cvs. Dochiodome, Maehyang, Redpearl, Samaberry and Akihime. Factors affecting the occurrence of Fusarium wilt were investigated; infested soils had high salt concentrations, low pH, OM, average P2O5 and exchangeable. Fusarium wilt was more frequent following conventional basal fertilization than after non-nitrogen basal fertilization and more frequent following the use of NH4-N than after NO3-N.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.1
• /
• pp.70-77
• /
• 1999

A miniaturized voltage controlled oscillator using multi-layer ceramic technology at PCS frequency band is designed and fabricated. To improve the phase noise characteristics and to reduce the size, the strip line which is embedded in a high performance multi-layer ceramic substrate is used as an inductor of VCO. And the fabricated VCO is very small size ($6mm\times6mm\times2mm$). At the bias condition of 3.3 V and 9mA, the output power and phase noise in the operating frequency range of 1,720~1,780 MHz are -3.7 dBm and -95 dBc/Hz at 10 KHz offset from the carrier, respectively. The phase noise and size are better than the conventional VCO using glass epoxy substrate.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.35-41
• /
• 2016

Ceramic-metal based high power LED array package was developed via thick film LTCC technology using a glass-ceramic insulation layer and a silver conductor patterns directly printed on the aluminum heat sink substrate. The thermal resistance measurement using thermal transient tester revealed that ceramic-metal base LED package exhibited a superior heat dissipation property to compare with the previously known packaging method such as FR-4 based MCPCB. A prototype LED package sub-module with 50 watts power rating was fabricated using a ceramic-metal base chip-on-a board technology with minimized camber deformation during heat treatment by using partially covered glass-ceramic insulation layer design onto the aluminum heat spread substrate. This modified circuit design resulted in a camber-free packaging substrate and an enhanced heat transfer property compared with conventional MCPCB package. In addition, the partially covered design provided a material cost reduction compared with the fully covered one.

• Radiation Oncology Journal
• /
• v.20 no.3
• /
• pp.206-214
• /
• 2002

Purpose : The aim of this study was to assess the effectiveness, survival rate and complications of radiation therapy and chemoradiation treatment in hypopharyngeal cancer. Methods and Materials : From January 1984 to December 1999, 56 patients who had hypopharyngeal carcinoma treated with curative radiation therapy were retrospectively studied. Twenty four patients $(42.9\%)$ were treated with radiation therapy alone (Group I) and $32\;(57.1\%)$ treated with a combination of chemotherapy and radiation (Group II). Total radiation dose ranged from 40.5 to 83. 5 Gy (median 67.9 Gy). Radiotherapy was given with conventional technique in 9 patients $(16.4\%)$, with hyperfractionation I ($1.15\~1.2$ Gy/fr., BID) in 26 $(47.2\%)$, hyperfractionation II (1.35 Gy/fr., BID) in 18 $(32.7\%)$, and accelerated fractionation (1.6 Gy/fr., BID) in 2 $(3.6\%)$. In chemotherapy, 5-FU ($1,000\;mg/m^2$ daily for 5 consecutive days) and cisplatin ($100\;mg/m^2$ on day 1) were administered in a cycle of 3 weeks interval, and a total of 1 to 3 cycles (average 2..3 cycles) were given prior to radiation therapy. Follow up duration was $1\~195$ months (median 28 months). Results : Overall 2 and 5 year survival rates were $40.6\%\;and\;27.6\%;\;50.0\%\;and\;30.0\%$ in Group I, and $36.4\%\;and\;26.3\%$ in Group II, respectively. Complete local control rates in Group I and II were $70.0\%\;and\;67.7\%$, respectively. The response to radiotherapy and nodal stage were statistically significant prognostic factors. The complication rate was increased in Group II and was decreased in hyperfractionation. Conclusion : The response to radiotherapy and nodal stage were valid factors to indicate the degree of control over the hypopharyngeal cancer. The induction cisplatin, 5-Fu chemotherapy was not valid in terms of local control rate and survival rate, but did contribute to an increased complication rate. The use of hyperfractionation was valid to reduce the late radiation complications.

• Journal of Life Science
• /
• v.13 no.1
• /
• pp.15-20
• /
• 2003

Seeds treated before sowing should be dried for their quality control on their sale or storage. The experiments were done to clarify the effect of drying, temperature and light quality treated during drying and germination on germination of gourd (Lagenaria siceraria Standl.) seeds. Drying of treated seeds was done at $35^{\circ}C$. After treated seeds were dried. their germination test was done at 10, 20 and $30^{\circ}C$ on the condition of darkness, but with blue, red, far-red light and darkness as light quality treatments. FR-yongjadaemok and FR-kunghap were used as test cultivars and their daily germination rates were measured at treatment levels. Its presowing hydrated seeds were dried 10 hours at $35^{\circ}C$ until reached below their original moisture content, and germination rate between the above dried seeds and the conventional dry-heated ones was not significantly different. At $30^{\circ}C$ germination temperature, the treated seeds showed higher initial germination rate when dried under red light illumination than under darkness although their germination rates were nearly same at each temperature of 10 and $20^{\circ}C$ being relatively low. Effect of the red light treatment during their drying continued to more than 3 months. Germination rate of the red light treated seeds during drying was reduced by far-red light treated during their germination. The initial rate to the second day after sowing were higher under red light and darkness treated during germination than under the two other lights.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1036-1043
• /
• 2003

In this paper, novel lumped equivalent circuits for a conventional parallel directional coupler are proposed. This novel equivalent circuits only have self inductance and self capacitance, so we can design exact lumped equivalent circuit. The equivalent circuit and design formula for the presented lumped element coupler is derived based on the even- and odd-mode properties of a parallel-coupled line. By using the derived design formula, we have designed the 3 dB and 10 dB lumped element directional couplers at the center frequency of 100 MHz and 2 GHz, respectively a chip type directional coupler has been designed with multilayer configurations by employing commercial EM simulator. Designed chip-type directional couplers have a 3 dB-coupling value at the center frequency of 2 GHz and fabricated lumped directional coupler on fr4 organic substrate has a 3 dB, 10 dB-coupling values at the center frequency of 100 MHz. Excellent agreements between simulation results and measurement results on the designed directional couplers show the validity of this paper. Furthermore, in order to adapt to multi-layer process such as Low Temperature Cofired Ceramic (LTCC), chip-type lumped element couplers have been designed by using this method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.7
• /
• pp.1-12
• /
• 2014

This paper is proposed to design the new heat-sink apparatus for improving the heat transfer characteristics in the power LED chip, and results of the operation characteristics were discussed. The core design is that the soldering through-hole on the FR-4 PCB board is formed to the effective heat transfer. That is directly filled with Ag-nano materials, which shows the high thermal conductivity. The heat transfer medium consisting of Ag-nano materials is classified into two structures. Mediums are called as the heat slug and the multi-pin in this work. The heat of the high temperature generated from the LED chip was directly transferred to the heat slug of the one large size. And the accumulated heat from the heat slug was quickly dissipated by the medium of the multi-pin, which is the same body with the heat slug. This multi-pin was designed for the multi-dissipation of heat by increasing the surface areas with a little pins. Subsequently, the speed of the heat transfer with this new heat-sink apparatus is three times faster than the conventional heat-sink. Therefore, the efficiency of the illuminating light will be improved by adapting this new heat-sink apparatus in the large area's LED.

• Radiation Oncology Journal
• /
• v.13 no.3
• /
• pp.215-223
• /
• 1995

Purpose : The aim of this study was to assess the effectiveness, survival rate and complication of radiation in nasopharyngeal cancer. Materials and Methods : From January 1980 to May 1989. Fifty patients who had nasopharyngeal carcinoma treated with curative radiation therapy at Kosin Medical Center were retrospectively studied. Thirty seven patients($74{\%}$) were treated with radiation therapy alone(Group I) and 13 patients ($26{\%}$) treated with combination of chemotherapy and radiation (Group II). Age distribution was 16-75 years(median : 45.8 years). In histologic type, squamous cell carcinoma was in 30 patients($60{\%}$), undifferentiated carcinoma in 17 patients($34{\%}$), and lymphoepithelioma in 3 patients($6{\%}$). According t AJCC staging system. 4 patients($8{\%}$) were in $T_1$, 13 patients($26{\%}$) in $T_2$. 20 patients($40{\%}$) in $T_3$, 13 patients($26{\%}$) in $T_4$ and 7 patients($14{\%}$) in $N_0$, 6 patients($12{\%}$) $N_1$, 23 patients($46{\%}$) in $N_2$, 14 patients($28{\%}$) in $N_3$. Total radiation dose ranges were 5250-9200cGy(median : 7355 cGy) in Group I and 5360-8400cGy(median : 6758cGy) in Group II Radiotherapy on 4-6MV linear accelerator and/or 6-12MeV electron in boost radiation was given with conventional technique to 26 patients($52{\%}$), with hyperfractionation(115-120cGy/fr., 2times/day) to 16 patients($32{\%}$), with accelerated fractionation(160cGy/fr., 2 times/day) to 8 patients($16{\%}$). In chemotherapy, 5 FU 1000mg daily for 5 consecutive days, pepleomycin 10mg on days 1 and 3, and cisplatin 100mg on day 1 were administered with 3weeks interval, total 1 to 3 cycles(average 1.8cycles) prior to radiation therapy. Follow up duration was 6-140 months(mean : 58 months). Statistics was calculated with Chi-square and Fisher's exact test. Results : Complete local control rates in Group I and II were $75.7{\%},\;69.2{\%} Overall 5 year survival rates in Group I and II were $56.8{\%},\;30.8{\%}$. Five year survival rates by histologic type in Group I and II were $52.2{\%},\;14.3{\%}$ is squamous cell carcinoma and $54.5{\%},\;50{\%}$ in undifferentiated carcinoma. Survival rates in Group I were superior to those of Group II though there were not statistically significant. In both group, survival rates seem to be increased according to increasing total dose of radiation up to 7500cGy, but not increased beyond it. There were not statistically significant differences in survival rates by age, stage, and radiation techniques in both group. Twenty four patients($48{\%}$) experienced treatment failures. Complications were found in 12 patients($24{\%}$). The most common one was osteomyelitis(4 patients, $33.3{\%}$) involving mandible (3 patients) and maxilla(1 patient). Conclusion : Chemotherapy in combination with radiotherapy was found to be not effective to nasopharyngeal cancer and the survival rate was also inferior to that of radiation alone group though it was statistically not significant due to small population in chemotherapy combined group.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.221-221
• /
• 2013

Vertical LED (VLED) has been recognized as a way to obtain the high-power LED due to their advantages [1]. However, approximately 4% of the light generated from the active region is extracted, if the light extraction from side walls and back side is neglected because of Fresnel reflection (FR) and total internal reflection (TIR) [2,3]. In this study, the optical simulation of the VLED with the various microstructures was performed. Among them, the microlens having the diameter of 3 ${\mu}m$ and the height of 1.5 ${\mu}m$ shown the best result was chosen, and then, optimized microlens was formed on a GaN template using conventional semiconductor process. Various microstructures were proposed to improve the light extraction efficiency (LEE) of the VLED for the simulation. The LEE was simulated using LightTools based on a Monte Carlo ray tracing. The microstructures with hemisphere, cone, truncated and cylinder pattern having diameter of 3 ${\mu}m$ were employed on the top layer of the VLED respectively. The improvement of the LEE by using the microstructure is 87% for the hemisphere, 77% for the cone, 53% for the truncated, 21% for the cylinder, compared with the LEE of the flat surface at the reflectance of 85%. The LEE was increased by 88% at the height of 1.5 ${\mu}m$, compared with the LEE of the flat surface. We found that the microlens on the top layer is the most suitable for increasing the LEE. In order to apply the proposed microlens on n-GaN surface, we fabricated microlens on a GaN template. A photoresist array having hexagonal-closed packed microlens was fabricated on the GaN template. Then, optimization of etching the GaN template was performed using a dry etching process with ICP-RIE. The dry etching carried out using a gas mixture of Cl2 and Ar, each having a flow rate of 16 sccm and 10 sccm, respectively with RF power of 50 W, ICP power of 900 W and chamber pressure of 2 mTorr was the optimum etching condition as shown in Fig. 2(a).