• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.431-438
• /
• 2004

Medical ultrasonic imaging is a useful imaging facility known to be most safe and easy. It enables physicians to observe the inside structures of the bodies, blood flow, and motions of internal organs. Some physical properties of biologic tissues can also be estimated from backscattered sounds. However, the ultrasonic pulses interrogating the living organisms leave their footprints in the returning signals during imaging. Some significant details are buried in the footprints and their overlaps from adjacent particles. These distortions also decrease the quality of the images. Many research efforts have been made to enhance the image quality and to recover the acoustic information in various ways. In this study, a new interrogation method based on the wavelet and subband filter bank is proposed. It adopts the subband wavelet filters satisfying the perfect-reconstruction (PR) conditions as the interrogating pulses to restore the details useful in tissue characterization and to enhance the image quality. The proposed method was applied to two types of simulations of ultrasonic imaging. The results showed its ability to restore the detailsin the simulated interrogation of biologic tissues, and verified the improved image quality in the simulated imaging of general ultrasonic phantom compared with the conventional method.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.428-436
• /
• 2012

This study aimed to develop the multi-span plastic greenhouse which is suitable for tomato cultivation and is safe against climatic disasters such as typhoon or heavy snow. The width and heights of eaves and ridge of newly developed tomato greenhouse are 7, 4.5 and 6.5 m, respectively. The width is the same but the eaves and ridge heights are 1.8 and 2 m higher than conventional 1-2 W greenhouses, respectively. Cross beam has been designed as a truss structure so it can sustain loads of tomato and equipment. Tomato greenhouse has been designed according to climatic disaster preventing design standard maintaining the high height. In other words, the material dimensions and interval of materials including column and rafter have been set to stand against $40m{\cdot}s^{-1}$ of wind and 40 cm of snow. Tomato greenhouse has been equipped with rack-pinion type roof vents which have been used in glass greenhouse in order to prevent excessive rise in air temperature. This vent type is different from that of 1-2 W type greenhouse which is made by rolling up and down the vinyl at upper part of column. Roof vents are installed at ridge, and thus external air inflow and natural ventilation are maximized. As the height increases, heating cost increase as well and, therefore, tomato greenhouse has been equipped with multi-layered thermal curtain, of which thermo-keeping is excellent, to prevent heat from escaping.

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.185-191
• /
• 2008

To fundamentally solve the problem of deterioration of concrete structures, it has been researched that the high durable concrete structure reinforced with the FRP rebar can be one of major solution to the newly-developed concrete structure. FRP rebar has lots of advantages such as non-corrosive, high performance and light weight against the conventional steel rebar. Among these kinds of FRP rebars, GFRP rebar has usually been considered as the best reinforcement because of its economic point of view. Even though the material capacity of the GFRP rebar was already investigated, there are some problems such as low modulus of elastic that will be cause for degrade of the serviceability of flexural concrete member reinforced with the GFRP rebar. Thus, the deflection characteristics of the GFRP rebar reinforced concrete structure should be considered then investigated. In this study, ACI 440 guideline (2003), ISIS Canada Design Manual (2001) and Toutanji et al. (2000) was considered for predicting the moment of inertia of the concrete beam reinforced with the GFRP rebar. And it was also evaluated that load-deflection relationship had a good accordance with the test and analysis result. In the result of this study, it could be estimated that the load-deflection relationship using the suggested equation of moment of inertia in this study indicated better accordance with the test result than that of the others until failure.

• Journal of Korean Medicine Rehabilitation
• /
• v.20 no.2
• /
• pp.63-77
• /
• 2010

Objectives : It is known that abdominal obesity increases the possibility of cardiovascular diseases, early death, and metabolic syndrome including dyslipidemia and insulin resistance. Clinical trials have been under way to verify the effectiveness of treatment for abdominal obesity. The objective of this study is to set criteria about how effective oriental medicine and acupuncture are in abdominal obesity. Methods : I manually search "www.clinicaltrial.gov", 4 Korean medical databases and 4 Korean medical journals of abdominal obesity. Search terms used were "abdominal obesity" or "visceral obesity". In order to see detail review, searching was performed from 01, 01, 2005 to 11, 31, 2009. And I classified all the searched studies into design, intervention, purpose, end point, diseases, condition and etc. Results : 1. I could search total 67 trials in "www.clinicaltrial.gov". I found 9, 10, 13, 8, 6 clinical trial from 2005 to 2009 every year. 2. Test on both gender and adult or adult and senior have been most frequent. 3. Randomization clinical trial is 51 cases that occupied 96.2%. 38 cases use control group. 4. Body mass index(BMI) and waist circunference(WC) are major criteria of abdominal obesity clincal trial. WC, BMI, abdominal fat mass, body weight are measured at end point of abdominal obesity clincal trial. 5. I could search total 86 cases in domestic study. I found 15, 23, 23, 20, 5 cases from 2005 to 2009 every year. 6. Test on female and adult have been most frequent in domestic study. 7. Randomization clincal trial is only 2 cases that occupied 2.3%. 62 cases use control group in domestic study. 8. BMI, body fat percent, WC, visceral-subcutaneous fat ratio(VSR), waist-hip ratio(WHR) are criteria of abdominal obesity clincal trial in domestic study. WC, BMI, abdominal fat mass, body weight are measured at end point of abdominal obesity clincal trial in domestic study. Conclusions : To improve abdominal obesity study in traditional korean medicine, it is need to activate clinical trial, meta analysis, develope of clinical practice guidelines, co-works with conventional medicine and etc.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.2
• /
• pp.43-50
• /
• 2009

Although thin PCBs(Printed Circuit Boards) have recently been required for high density interconnection, high electrical performance, and low manufacturing cost, the utilization of thin PCBs is severely limited by warpage and reliability issues. Warpage of the thin PCB leads to failure in solder-joints and chip. The $B^2it$(Buried Bump Interconnection Technology) for PCB has been developed to achieve a competitive manufacturing price. In this study, chip temperature, package warpage, chip stress and solder-joints stress characteristics of the PCB prepared with $B^2it$ process have been calculated using thermo-mechanical coupled analysis by the FEM(Finite Element Method). FEM computation was carried out with the variations in bump shapes and kinds of materials under 1.5W power of chip and constant convection heat transfer. The results show that chip temperature distribution reached more quickly steady-state status with PCB prepared with $B^2it$ process than PCB prepared with conventional via interconnection structure. Although $B^2it$ structures are effective on low package warpage and chip stress, with high strength bump materials arc disadvantage for low stress of solder-joints. Therefore, it is recommended that optimized bump shapes and materials in PCB design should be considered in terms of reliability characteristics in the packaging level.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.2
• /
• pp.168-175
• /
• 2017

In this paper, a 5V small-area NMOS-diode eFuse OTP memory cell is proposed. This cell which is used in PMICs consists of a 5V NMOS transistor and an eFuse link as a memory part, based on a BCD process. Also, a regulated voltage of V2V ($=2.0V{\pm}10%$) instead of the conventional VDD is used to the pull-up loads of a VREF circuit and a BL S/A circuit to obtain a wider operational voltage range of the eFuse memory cell. When this proposed cells are used in the simulation, their sensing resistances are found to be $15.9k{\Omega}$ and $32.9k{\Omega}$, in the normal read mode and in the program-verify-read mode, respectively. Furthermore, the read current flowing through a non-blown eFuse is restricted to $97.7{\mu}A$. Thus, the eFuse link of a non-blown eFuse OTP memory cell is kept non-blown. The layout area of the designed 1kb eFuse OTP memory IP based on Dongbu HiTek's BCD process is $168.39{\mu}m{\times}479.45{\mu}m(=0.08mm^2)$.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.7
• /
• pp.377-392
• /
• 2005

A lot of studies to measure and analyze the system performance have been done in areas such as system modeling, performance measurement, monitoring, and performance prediction since the advent of a computer system. Studies on a framework to unify the performance related areas have rarely been performed although many studies in the various areas have been done, however. In the case of TMO(Time-Triggered Message-Triggered Object), a real-time programming model, it hardly provides tools and frameworks on the performance except a simple run-time monitor. So it is difficult to analyze the performance of the real-time system and the process based on TMO. Thus, in this paper, we propose a framework for the dynamic analysis of the real-time system based on TMO, TDAF(TMO based Dynamic Analysis Framework). TDAF treats all the processes for the performance measurement and analysis, and Provides developers with more reliable information systematically combining a load model, a performance model, and a reporting model. To support this framework, we propose a load model which is extended by applying TMO model to the conventional one, and we provide the load calculation algorithm to compute the load of TMO objects. Additionally, based on TMO model, we propose performance algorithms which implement the conceptual performance metrics, and we present the reporting model and algorithms which can derive the period and deadline for the real-time processes based on the load and performance value. In last, we perform some experiments to validate the reliability of the load calculation algorithm, and provide the experimental result.

• Journal of KIISE:Software and Applications
• /
• v.29 no.9
• /
• pp.676-683
• /
• 2002

The success of XML(eXtensible Markup Language) is primarily based on its flexibility : everybody can define the structure of XML documents that represent information in the form he or she desires. XML is so flexible that XML documents cannot be automatically provided with an underlying semantics. Different tag sets, different names for elements or attributes, or different document structures in general mislead the task of classifying and clustering XML documents precisely. In this paper, we design and implement a system that allows checking the semantic-based similarity between XML tags. First, this system extracts the underlying semantics of tags and then expands the synonym set of tags using an WordNet thesaurus and user-defined word library which supports the abbreviation forms and compound words for XML tags. Seconds, considering the relative importance of XML tags in the XML documents, we extend a conventional vector space model which is the most generally used for document model in Information Retrieval field. Using this method, we have been able to check the similarity between XML tags which are represented different tags.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.10
• /
• pp.523-532
• /
• 2003

Video on Demand(VOD) services cause high resource consumption in a video seuer, because multimedia are characterized by continuous playback, a high bandwidth requirement, and long playback duration. Patching has been proposed to save the network I/O bandwidth of a video server. To achieve true VOD, patching uses multicasting to share video streams, thereby providing immediate VOD services to users without any service latency. A communication channel is used to either multicast the entire video as a regular channel or multicast only the leading portion of a video as a Patching channel. This paper Proposes a buffering patching technique that divides regular channels, as used in patching, into sub-regular channels and regular channels to shorten the holding time of the channels. In the proposed technique, the last portion of video data, corresponding to the size of the buffering window, is not transferred by sub-regular channels, but rather downloaded and buffered in the user buffer from the latest regular channel. When simulations were performed to compare the performance of the proposed technique with that of conventional patching, the results indicated that the proposed technique was superior in terms of the defection rate, average service latency, and fairness, although the amount of video data buffered at each user station was higher than that with patching.

• The KIPS Transactions:PartD
• /
• v.15D no.1
• /
• pp.121-130
• /
• 2008

In line with the enhanced weight and variety of electronic commerce in business activities, new type of payment settlement and banking system which will enable to store, create and transfer values from the existing method of payment settlement is highly required. Cyber Banking system draws strong attention being the solution of there requirements. The existing Cyber Banking system has the difficulty of operation, administration, in addition to the problem of initial facility investment of big amount, resulted from the usage of the current business process. As the existing Cyber Bank system is unable to carry out the function of storing, creating, and transferring values due to the adoption conventional credit card system instead of the application of non-stop payment system between the seller and buyer. As a result, current Cyber Bank system still imply the deficiency of non-performing cash payment function on internet. This paper describes (1) an integrated application process, One Process One Input (OPOI) which is essential for software development of the Cyber Bank, (2) an application process of payment settlement system to be applied to the electronic commerce in Internet. And then, with these for a basis, (3) design and implementation of payment settlement system through CyberBank for Electronic Commerce. Consequently, by means of this suggested process, we could attempt to solve the problem of existing Cyber Bank system and further to explore the possibility of advanced Cyber Banking being the non-stop payment settlement system. The effectiveness of this suggested system has been practically confirmed.