• 한국생산제조학회지
• /
• 제22권3_1spc호
• /
• pp.551-557
• /
• 2013

The heat transfer performance and pressure drop characteristics of brazed-plate heat exchangers with 20 and 30 plates were experimentally measured and analyzed in this study. The mass flow rates of the heat exchangers with 20 and 30 plates were fixed at 0.6 and 0.9 kg/s for the low temperature side, respectively. The mass flow rate for the high temperature side was controlled from 0.2 kg/s to 1.2 kg/s. The inlet temperatures for the high and low temperature sides were $10^{\circ}C$ and $7^{\circ}C$, respectively. The heat transfer characteristics were not influenced by the number of plates. The pressure drop at the heat exchanger with 30 plates was slightly higher than that with 20 plates. The values calculated from the correlations based on gasket plate heat exchangers were compared with the experimental results. It was found that the predicted Nusselt numbers for the gasket plate heat exchangers were about 5% to 20% lower than the measured Nusselt numbers for the brazed plate heat exchangers. However, a pressure drop comparison showed that the calculated pressure drops at the gasket plate heat exchangers were less than half of the measured pressure drops at the brazed plate heat exchangers.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.153-158
• /
• 2016

This paper aims to discuss the Non Darcy boundary layer flow of non-conducting viscous fluid with magnetic ferroparticles over a permeable linearly stretching surface with ohmic dissipation and mixed convective heat transfer. A magnetic dipole is applied "a" distance below the surface of stretching sheet. The governing equations are modeled. Similarity transformation is used to convert the system of partial differential equations to a system of non-linear but ordinary differential equations. The ODEs are solved numerically. The effects of sundry parameters on the flow properties like velocity, pressure, skin-friction coefficient and Nusselt number are presented. It is deduced the frictional resistance of Lorentz force decreases with stronger electric field and the trend reverses for temperature. Skin friction coefficient increase with increase in ferromagnetic interaction parameter. Whereas, Nusselt number decrease.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제22권4호
• /
• pp.217-239
• /
• 2018

This paper examined the MHD and thermal behavior of unsteady mixed convection flow of a rotating fluid in a porous parallel plate channel in the presence of Hall current and heat source. The exact solutions of the concentration, energy and momentum equations are obtained. The influence of each governing parameter on non dimensional velocity, temperature, concentration, skin friction coefficient, rate of heat transfer and rate of mass transfer at the porous parallel plate channel surfaces is discussed. During the course of numerical computation, it is observed that as Hall current parameter and Soret number at the porous channel surfaces increases, the primary and secondary velocity profiles are increases while the primary and secondary skin friction coefficients are increases at the cold wall and decreases at the heated wall. In particular, it is noticed that a reverse trend in case of heat source parameter.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.1769-1785
• /
• 2021

The Integral Pressurized Water Reactors (IPWRs) as the innovative advanced and generation-III + reactors are under study and developments in a lot of countries. This paper is aimed at the thermal hydraulic study of the hot and average fuel sub-channel in a Generation III + IPWR by loose external coupling to the neutronic simulation. The power produced in fuel pins is calculated by the neutronic simulation via MCNPX2.6 then fuel and coolant temperature changes along fuel sub-channels evaluated by computational fluid dynamic thermal hydraulic calculation through an iterative coupling. The relative power densities along the fuel pin in hot and average fuel sub-channel are calculated in sixteen equal divisions. The highest centerline temperature of the hottest and the average fuel pin are calculated as 633 K (359.85 ℃) and 596 K (322.85 ℃), respectively. The coolant enters the sub-channel with a temperature of 557.15 K (284 ℃) and leaves the hot sub-channel and the average sub-channel with a temperature of 596 K (322.85 ℃) and 579 K (305.85 ℃), respectively. It is shown that the spacer grids result in the enhancement of turbulence kinetic energy, convection heat transfer coefficient along the fuel sub-channels so that there is an increase in heat transfer coefficient about 40%. The local fuel pin temperature reduction in the place and downstream the space grids due to heat transfer coefficient enhancement is depicted via a graph through six iterations of neutronic and thermal hydraulic coupling calculations. Working in a low fuel temperature and keeping a significant gap below the melting point of fuel, make the IPWR as a safe type of generation -III + nuclear reactor.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권1호
• /
• pp.50-56
• /
• 2008

Experimental results for forced convection condensation of Refrigerant-22 and ternary Refrigerant-407C(HFC-32/125/134a 23/25/52 wt%) which is being considered as a substitute R-22 inside a horizontal micro-fin tube are presented. The test section was horizontal double-tube counterflow condenser with a length 4,000 mm micro-fin tube, having 8.53 mm ID, 0.2 mm fin height and 60 fins. The range of parameters of mass velocity were varied from 102.1 to 301.0 kg/(m2.s) and inlet quality 1.0. At the given experimental conditions. the average heat transfer coefficients for R-407C were lower than that for R-22 at a micro-fin tube. Over the mass velocity range tested. the PF(penalty factor) for R-22, R-407C were lower than the increasing ratio of heat transfer area by fins, and the EF(enhancement factor) for R-22, R-407C were higher than the increasing ratio of heat transfer area by fins.

• 한국수소및신에너지학회논문집
• /
• 제25권4호
• /
• pp.449-458
• /
• 2014

The heat transfer phenomenon was investigated in this study when a single round water jet with the low velocity and against the direction of gravity flows to the downward facing Isothermal of definite thickness circular plate. Experimental investigation is performed for a single round jet diameter 4mm, 6mm, and 8mm with the jet velocity 2.4m/s and jet fluid temperature of $24^{\circ}C$, varied the ratio of nozzle clearance/nozzle diameter (H/D)1, 2, 3, 6, and 8, on circular plate isothermal condition with $85^{\circ}C$. The local convection heat transfer coefficient distributions are analyzed based on the visualization of jet flow field. The effects of the diameter of Nozzle, the ratio of H/D and the ratio of nozzle diameter/circular plate diameter on heat transfer phenomenon are investigated. As a results of experiment is obtained correlation equation, $Nu_r=3.18Re_r^{0.55}Pr_r^{0.4}$.

• 대한기계학회논문집B
• /
• 제27권12호
• /
• pp.1724-1733
• /
• 2003

This paper assesses the prediction performance of explicit algebraic stress and heat-flux models for reduction of heat transfer coefficient in a strongly-heated vertical tube. Two explicit algebraic stress models and four explicit algebraic heat-flux models are selected for assessment. Eight combinations of explicit algebraic stress and heat-flux models are used in predicting the turbulent gas flows with intense heating, which yields the significant property-variation. The results showed that the two combinations of GS-AKN and WJ-mAKN predicted the Nusselt number and the axial wall temperature variations well and that the predictions of Nusselt number with WJ-combinations spread in a wider range than those with Gs-combinations. WJ is the explicit algebraic stress model of Wallin and Johansson and GS is the model of Gatski and Speziale and that AKN is the explicit heat-flux model of Abe, Kondoh and Nagano and mAKN is the modified AKN.

• 한국화재소방학회논문지
• /
• 제28권1호
• /
• pp.52-57
• /
• 2014

본 논문에서는 에너지방정식과 비정상 비압축성 Navier-Stokes 방적식을 사용하여 동절기 소방배관의 동파방지를 위한 최적의 열선위치를 확인하였다. 물의 자연대류와 소방 배관의 전도 열방정식이 결합된 복합열전달을 해석하였다. 혼합 열전달 배관 내 물의 비정상적인 유동과 온도분포를 확인하기 위하여 SIMPLE 형태의 알고리즘을 기반으로 한 상용코드(ANSYS-FLUENT)가 사용되었다. 수치해석을 수행하여 등온선과 벡터장을 살펴보았다. 물의 열팽창계수를 일정하다고 가정할 때 소방 배관 단면의 하부에 열선을 설치하는 것이 다른 위치에 설치하는 것보다 시간에 따른 물의 최저온도가 가장 높아서 동파방지에 가장 효과적인 것을 확인할 수 있었다.

• 한국지반공학회논문집
• /
• 제29권8호
• /
• pp.75-84
• /
• 2013

지반의 동결현상은 일반적으로 대기와 지반의 온도차이로 발생하는 열흐름에 의해, 지반에 존재하는 물이 동결되어 지반의 물리적 성질이 변하는 현상을 일컫는다. 동결현상 해석에 필요한 지중온도 변화는 크게 대기와 지반의 경계층에서 발생하는 열유동과 지중 내에서 흙을 구성하는 성분들의 열전도 현상으로 설명할 수 있다. 따라서 지표면의 경계조건과 지반의 열적 특성은 동결지반 온도분포 해석에 중요한 인자들이다. 지표면 경계조건은 대기온도, 지표의 식생상태, 토질조건을 포함한 간편상수법들이 제시되어 있다. 대기온도 변화에 따른 지표의 열전달을 설명하는 대표적인 열물성 값은 지표면에서의 n-factor와 대류 열전달계수이다. 본 연구에서는 대기와 지반의 경계층을 해석하는데 필요한 지표면 n-factor와 대류 열전달계수의 적용성을 분석하고자 실내실험을 수행 하였다. 실내실험 결과를 토대로 상용 수치해석 프로그램인 TEMP/W를 이용하여 각각의 경계층 조건에 따른 지중온도 변화를 해석하고 실내실험을 통해 측정된 온도 데이터와 비교하였다. 결론적으로 n-factor보다 지표면 대류 열전달계수를 적용한 수치 해석 모델이 실내실험 결과와 유사하였다.

• 설비공학논문집
• /
• 제13권12호
• /
• pp.1282-1287
• /
• 2001

This study presents the numerical analysis of natural convection of a micro- environments with air permeability in the clothing air-layer. As a numerical model the clothing air layer of shoulder and arm were adopted. Finite volume method for two-dimensional laminar flow was used for the analysis of flow and thermal characteristics of velocity, temperature and concentration in the air layer between body and clothing. As temperature boundary conditions, a body skin has a high temperature with $34^{\circ}C$ and the environmental temperatures are 5, 15 and $25^{\circ}C$ for various permeability coefficients. The distributions of concentration, temperature and velocity are shown that two large cells form at horizontal and vertical air layer, respectively. As the temperature difference between body skin and environment decreases, the heat transfer is decreased rapidly.