• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.1
• /
• pp.32-36
• /
• 2022

AGZO thin films were deposited on glass substrates using RF magnetron sputtering system under Ar flow rates, and their structural, electrical, and optical properties were analyzed systematically. As a result of the XRD pattern, the peak of the (002) (2θ≈33.7˚) orientation was observed, and it was found to have a hexagonal wurtzite structure. The sheet resistance of Ar 5 sccm was 3.073×10² Ω/sq and showed the best electrical properties because of the improvement of mobility due to the increase of the grain size and the variation of RMS roughness. In addition, the average transmittance was more than 90% for all samples, which demonstrated good optical properties. It is expected that the TCO characteristics can be improved by controlling Ar flow rates, and this will increase the efficiency of photoelectronic devices such as OLED and solar cells.

• Nuclear Engineering and Technology
• /
• v.46 no.3
• /
• pp.413-422
• /
• 2014

Presented in this study are the variations of microstructures and mechanical properties with tempering and Post-Weld Heat Treatment (PWHT) conditions for SA508 Gr.4N steel used as Reactor Pressure Vessel (RPV) material. The blocks of model alloy were austenitized at the conventional temperature of $880^{\circ}C$ then tempered and post-weld heat treated at four different conditions. The hardness and yield strength decrease with increased tempering and PWHT temperatures, but impact toughness is significantly improved, especially in the specimens tempered at $630^{\circ}C$. The sample tempered at $630^{\circ}C$ with PWHT at $610^{\circ}C$ shows optimum mechanical properties in hardness, strength, and toughness, excluding only the transition property in the low temperature region. The microstructural observation and quantitative analysis of carbide size distribution show that the variations of mechanical properties are caused by the under-tempering and carbide coarsening which occurred during the heat treatment process. The introduction of PWHT results in the deterioration of the ductile-brittle transition property by an increase of coarse carbides controlling cleavage initiation, especially in the tempered state at $630^{\circ}C$.

• Preventive Nutrition and Food Science
• /
• v.17 no.3
• /
• pp.203-209
• /
• 2012

The effects of variable moisture content, screw speed and barrel temperature on the physicochemical properties of red ginseng powder extrudates were investigated. The raw red ginseng powders were processed in a co-rotating intermeshing twin-screw extruder. Primary extrusion variables were feed moisture content (20 and 30%), screw speed (200 and 250 rpm) and barrel temperature (115 and $130^{\circ}C$). Extruded red ginseng showed higher crude saponin contents (6.72~7.18%) than raw red ginseng (5.50%). Tested extrusion conditions did not significantly affect the crude saponin content of extrudates. Increased feed moisture content resulted in increased bulk density, specific length, water absorption index (WAI), breaking strength, elastic modulus and crude protein content and decreased water solubility index (WSI) and expansion (p<0.05). Increased barrel temperature resulted in increased total sugar content, but decreased reducing sugar content in the extrudate (p<0.05). Furthermore, increased barrel temperature resulted in increased amino acid content and specific length and decreased expansion and bulk density of extrudates only at a higher feed moisture content. The physicochemical properties of extrudates were mainly dependent on the feed moisture content and barrel temperature, whereas the screw speed showed a lesser effect. These results will be used to help define optimized process conditions for controlling and predicting qualities and characteristics of extruded red ginseng.

• Journal of Powder Materials
• /
• v.18 no.1
• /
• pp.18-23
• /
• 2011

Sintered Nd-Fe-B magnets are widely used in many fields such as motors, generators, actuators, microwaves and so on due to their excellent magnetic properties. Many researchers have shown that the Nd-rich phase was essentially important for high magnet properties. In this study, we focused on controlling of the Nd-rich phase to enhance magnetic properties by the cyclic sintering process. Nd-Fe-B based sintered magnets were prepared by isothermal sintering and cyclic sintering processes. Magnetic properties and microstructure of the magnets were investigated. The coercivity was enhanced from 21.2 kOe to 23.27 kOe after 10 cycles of the sintering. The Nd-rich phase was effectively penetrated into the grain boundary between the $Nd_2Fe_{14}B$ grains by the cyclic sintering.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.5
• /
• pp.309-319
• /
• 2023

Non-woven fabric is a textile product made by spinning thermoplastic polymers without manufacturing processes such as stretching, doubling, twisting, weaving, and knitting to form a sheet-shaped web in which fibers are tangled with each other, and then combining them by mechanical and physical methods. In addition, the non-woven fabric manufacturing process has various raw material choices, high productivity, so it is a textile manufacturing technology that can have various uses and increase added value. This study was conducted to control the shape and physical properties of products by improving the manufacturing method of melt-blown non-woven fabrics using process technology that easily changes the shape of non-woven fabrics and improves mechanical properties. In particular, it is considered that a non-woven fabric with a thin material shape and improved mechanical properties will be easily applied to a continuous secondary battery manufacturing industry such as roll to roll operation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.4
• /
• pp.633-645
• /
• 2017

This study examined the effects of the number of Dakji layer (a layer, two layers), the time of Jumchichigi (20, 40 and 60 minutes) and the type of Choji method making Dakji (Oebal-teugi, Ssangbal-teugi) on five strength properties of Jumchi-Hanji. As a result, the number of Dakji layer and the time of Jumchichigi influenced the five strength properties (tensile, wet tensile, tearing, bursting, and folding strengths). Jumchi-Hanjis made with two layers of Dakijis had higher properties than Jumchi-Hanjis with a layer of Dakji in the strength properties. The more the time for Jumchichigi is spent, the more the five strength properties of Jumchi-Hanji increased. The type of Choji was related to only three strength properties. The tearing strength of Jumchi-Hanjis with one and two layers, and the wet tensile and the folding strengths of Jumchi-Hanjis with two layers depended on the type of Choji. The differences of Jumchi-Hanji and Dakji were also identified in the strength properties. All Jumchi-Hanjis had low tensile and wet tensile strengths when compared to Dakjis. However, Jumchi-Hanjis, made by sixty minute Jumchchigi, had generally higher tearing, bursting, and folding strengths than the Dakjis. In conclusion, the strength properties of Jumchi-Hanji could be improved by controlling the number of Dakji layers and the time of Jumchichigi.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1998.10b
• /
• pp.7-7
• /
• 1998

Research activities of Russian Medical Engineering Center and Institute of Medical Materials of Shape Memory Alloys and Implants are presented as follows: ${\bullet}$ The direction of elaboration of porous shape memory alloys for medicine. ${\bullet}$ Medical and technical requirements and physical and mechanical criteria of porous shape memory implants elaboration. ${\bullet}$ Basic laws of heat-, stress- and strain-induced changes of mechanical properties, shape memory effect and superelasticity in porous TiNi-based alloys. ${\bullet}$ Methods of regulation of shape memory effect parameters in porous alloys and methods for controlling the regulation-induced changes of physical and mechanical properties. ${\bullet}$ Original technologies of elaboration of porous alloys In various fields of medicine. ${\bullet}$ Arrangement of serial production of shape memory porous implants and examples of their medical use.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.2
• /
• pp.126-131
• /
• 2000

Transdermal therapeutic system(TTS) is often used as the method of drug dosage into the epidermic skin. Natural polymer were selected as ointment material of TTS. We investigated the permeation of natural polymer ointment containing drug in rat skin using horizontal membrane cell model. Permeation properties of materials were investigated for water-soluble drug such as oxiniacic acid in vitro. These results showed that skin permeation rate of drug across the composite was mainly dependent on the property of ointment base and drug. Proper selection of the polymeric materials which resemble and enhance properties of the delivering drug was found to be important in controlling the skin permeation rate. This result suggests a possible use of natural polymer ointment base as TTS of antihyperlipoproteinemic agent.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.1
• /
• pp.89-114
• /
• 1996

Liquid crystal-polymer composite(LCPC) films consisting of a continuous LC phase embedded in a three-dimensional network of polymer matrix are formed by photopolymerization-induced phase separ on. The LCPC films are switched from a light-scattering stats to a highly transparent stats on the application of electric fields. Since the alignment of LC molecular determines the electro-optical properties of films, the requirement for good contrast is to generate the nematic phase at high concentration. On the other hand, the concentration of UV-curable monomer must be increased above some critical value to from the flexible matrix of unbounded polymer. The mixing ratio of LC and UV-curable monomer affects the electro-optical and viscoelastic properties of LCPD films in two opposing ways. By controlling the phase separation process, at an LC fraction of 0.7, the maximum performance of LCPC films has been achieved, the response time of which is 2ms on the application of electric fields.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.2
• /
• pp.123-129
• /
• 2008

Transdermal therapeutic system(TTS) is often used as the method of drug dosage into the epidermic skin. Natural polymer were selected as ointment material of TTS. We investigated the permeation of natural polymer ointment containing drug in rat skin using horizontal membrane cell model. Permeation properties of materials were investigated for water-soluble drug such as Nicotinic acid N-oxide in vitro. These results showed that skin permeation rate of drug across the composite was mainly dependent on the property of ointment base and drug. Proper selection of the polymeric materials which resemble and enhance properties of the delivering drug was found to be important in controlling the skin permeation rate. This result suggests a possible use of natural polymer ointment base as TTS of antihyperlipoproteinemic agent.