• Journal of Adhesion and Interface
• /
• v.4 no.3
• /
• pp.9-13
• /
• 2003

In this paper, the effects of crosslinking agent and pH controlling agent on adhesive properties and water solubility of water soluble acrylic pressure sensitive adhesives were studied by adding the crosslinking agents or pH controlling agents after the polymerization. the tack, cohesive strength, and peel strength were measured to evaluate adhesive properties. the turbidity was also measured to evaluate water solubility of pressure sensitive adhesives. When crosslinking agent was added less than 0.2 wt%, tack increased and cohesive strength and peel strength decreased with increasing concentration. When crossinking agent was added more than 0.2 wt%, the results were opposited. When pH controlling agent was added, tack and water solubility decreased and peel strength and cohesive strength increased with increasing concentration. the influence of pH controlling agents on adhesive properties and water solubility of pressure sensitive adhesive increased in the order of lithium hydroxide, potassium hydroxide and sodium hydroxide.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.413-416
• /
• 2005

The super early hardening cement is widely used for reducing construction period. But there are some problems with handling the cement because the loss of workability is so big to control. In this study, the fluidity properties of super early hardening cement paste was evaluated at early age of hydration by using gel-time determination method. 4 types of set controlling agent were selected and combinations of them were used for gel-time test. As a result, the gel-time of super early hardening cement paste was extended up to 20 minutes by using the combinations of several types set controlling agent.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.4
• /
• pp.859-866
• /
• 2012

Some switching properties of multivariate control charts are investigated when the interval between two consecutive sample selections is not fixed but changes according to the result of the previous sample observation. Many articles showed that the performances of variable sampling interval control charts are more efficient than those of fixed sampling interval control charts in terms of average run length (ARL) and average time to signal (ATS). Unfortunately, the ARL and the ATS do not provide any information on how frequent a switch is being made. We evaluate several switching properties of two sampling interval Shewhart and CUSUM procedures for controlling mean vector of correlated quality variables.

• Journal of Families and Better Life
• /
• v.7 no.1
• /
• pp.1-14
• /
• 1989

The purpose of this study was to identify the problems in the consumption life of household over the family life cycle so that they would support to select the consumer education subjects and the establish the long-term household plan. For these purposes, a survey was conducted using questionnaire. The data used in this study included 562 homemakers living in Seoul. Statistics used for data analysis were frequency distribution, Mean, Percentile, One-way Anova, Scheffie-test, Multiple Classification Analysis. Major findings were as follows; 1) In the level of the problems in the consumption life of household, housing problem, durable goods problem, healthy-medical problem and child education problem area were in the low level. Leisure problem and properties management problem area were in the high level. 2) The problems in the consumption life of household differed significantly over the family life cycle. 3) When controlling family monthly income and education level of husband was compared with not-controlling them, the influences of family life cycle on the problems in the consumption life were as follows. (1)At housing problem area, the effect of the FLC was higher in controlling them than not-controlling them. (2) At other problems the effects of the FLC was lower or same in controlling them than not-controlling them.

• Journal of the Korean Ceramic Society
• /
• v.48 no.5
• /
• pp.404-411
• /
• 2011

The humidity controlling ceramic materials was developed by applying the phenomena of dew condensation in the capillary. It is said that the humidity range which human feels comfortable is from 40 to 70% in relative humidity. In this study, the ceramic tile using natural soils such as diatomite for interior wall was investigated. In particular, we had introduced novel processing routes for fabricating microcellular ceramics tile using hollow microsphere as a pore former. The microcellular pores in the humidity controlling ceramic materials showed the superior properties such as light-weight, heat insulation. The cell density was ${\sim}1.0{\times}10^9$ cells/$cm^3$ and density of sample was 0.65 g/$cm^3$ in the case of 1.71 wt% hollow microsphere content. Also, it is observed that the BET surface area and the pore volume of the sintered diatomite tile have the values of 40.92 $m^2$/g and 0.173 $cm^3$/g.

• Journal of the Korean Mathematical Society
• /
• v.35 no.3
• /
• pp.727-740
• /
• 1998

Controlling traffic lights at a bottleneck, in [5] a time of open passage is called optimal, if it minimizes the first moment of the asymptotic distribution of the queue length. The discussion of the first moment as function of the time of open passage is based on an analysis of the behavior of a fixed point when varying control parameters and delivers theoretical and computational aspects of the traffic problem.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.4
• /
• pp.10-16
• /
• 1997

This study was carried out to improve coating structure by controlling the electrostatic interaction of coating components and by changing the coating structure of coated paper prepared with amphoteric and anionic latices. The results indicated that amphoteric latex copolymerized with carboxylic and amine groups had stronger interaction with other coating components than anionic latex with branched carboxylic group by controlling pH. These properties of amphoteric latex showed positive effects on viscosity rheology, and supernatant sediment of coating color. The coated paper using amphoteric latex had also produced more porous and smoother coverage of the coating layer than that using anionic latex. This porous and smooth coating layer showed better optical properties and printability than those of anionic latex such as opacity, porosity, ink set-off, and wet ink receptivity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.818-821
• /
• 2003

Sn-doped $In_{2}O_{3}$ (ITO) thin film is one of the materials widely on research not only in the academic fields but also in industrial fields because of their transparency, high conductivity and good adhesion characteristics on substrate. ITO thin films are usually preferred oriented to one of the (222), (400), and (440) planes during crystallization process, which is dependent on processing variables. The preferred orientation affects electrical, optical and etching properties of the films. In this study, thin films of preferred oriented in different orientation were fabricated by controlling processing variables. The crystallization behavior, grain size, surface roughness, transparency and electrical properties of the thin films in different orientation were examined.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.118.1-118.1
• /
• 2016

The laser surface modification has been reported for its functional applications for improving tribological performance, wear resistance, hardness, and corrosion property. In most of these applications, continuous wave lasers and pulsed lasers were used for surface melting, cladding, alloying. Since flexibility in processing, refinement of microstructure and controlling the surface properties, technology utilizing lasers has been used in a number of fields. Especially, femtosecond laser has great benefits compared with other lasers because its pulsed width is much shorter than characteristic time of thermal diffusion, which leads to diminish heat affected zone. Moreover, laser surface engineering has been highlighted as an effective tool for micro/nano structuring of materials in the bio application field. In this study, we applied femtosecond and nanosecond pulsed laser to treat biometals, such as Mg, Mg alloy, and NiTi alloy, by heating to improve corrosion properties and functionalize their surface controlling cell response as implantable biomedical devices.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.683-686
• /
• 2005

This paper is related to investigate adding effect of fluorine-silicate hybrid type crack controlling agent(FS) on initial behavior, dynamic properties, adibatic hydration temp, and plastic crack behavior of concrete(Specification : 25-30-18). It is appeared that adding of FS contributed to strength elevation, lowering of hydration temperature as well as plastic crack reduction without disturbance of initial behaviors of concrete such as slump, air content and setting.