• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.5
• /
• pp.313-318
• /
• 2014

Recently, Ethernet-based Diagnostic Over Internet Protocol (DoIP) was applied to automotive systems, and in-vehicle gateways have been introduced to integrate Ethernet with traditional in-vehicle networks, such as the local interconnect network (LIN), controller area network (CAN) and FlexRay. The introduction of in-vehicle gateways and of Ethernet based diagnostic protocols not only decreases the complexity of the networks, but also reduces the update time for ECU software reprogramming while enabling the use of a range of services, including remote diagnostics. In this paper, a diagnostic gateway was implement for an automotive system, and the performance measurements are presented. In addition, a range of applications provided by the diagnostic gateway are proposed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.229-233
• /
• 2001

In this paper, we propose a remote controller for robot manipulator using local area network(LAN) and internet. To do this, we develope a server-client system as used in the network field. The client system is in any computer in remote place for the user to log-in the server and manage the remote factory. the server system is a computer which controls the manipulator and waits for a access from client. The server system consists of several control algorithms which is needed to drive the manipulator and networking system to transfer images that shows states of the work place, and to receive a Tmp data to run the manipulator. The client system consists of 3D(dimension) graphic user interface for teaching and off-line task like simulation, external hardware interface which makes it easier for the user to teach. Using this server-client system, the user who is on remote place can edit the work schedule of manipulator, then run the machine after it is transferred and monitor the results of the task.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2132-2134
• /
• 2002

최근 분산제어시스템 설계시 CAN(Controller Area Network)을 적용하는 연구가 활발히 진행되고 있다. 본 논문에서는 분산제어에 필요한 각종 입출력 데이터를 CAN버스 상에서 송수신할 수 있는 Smart Sensor/Actuator Node를 직접 개발하고, 이를 이용한 실험용 Network를 구축하였다. Sensor Node에서 획득된 외부의 Analog신호를 CAN Bus를 통해 전송한 후, 원격지의 Actuator Node에서 출력하는 Data 송수신 실험을 통해서 설계된 Network와 각 Node의 효율성을 입증하였다.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.35-42
• /
• 2001

This paper deals with an architecture of network-based control system using the CAN(Controller Area Network) protocol and its traffic analysis. It is difficult to determine an optimal network-based control architecture for a specific AGV(Autonomous Guided Vehicle) system with a manipulator arm. The fixed number of periodic messages to be occurred is pre-defined in the system. To determine whether the proposed system architecture is effective or not, we perform traffic analysis for the real-time communication of all messages. Through simulations, the range of transmission speed is found satisfying required conditions and the permissible number of additional sensors is investigated for improving the system performance, when the sampling periods of analog sensors are determined under fixed condition that the transmission speed is over 500Kbps.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.52 no.3
• /
• pp.95-99
• /
• 2003

In this paper, the power system automation based on CAN communication protocol is introduced. Along with digitalization of electrical device, the various on-line services such as remote control, remote monitoring, remote parameter setting, fault data recording and remote diagnostic have been realized and become available. Therefore, it is necessary for those electrical devices to have real-time and reliable communication protocols. Author proposes DNPC(Distributed Network Protocol with CAN) which is proper to the power system SCADA (Supervisory Control And Data Acquisition) and DCS (Distributed Control System). The physical and datalink layer of DNPC protocol consists of the CAN2.0B which has the real-time characteristics and powerful error control scheme. As the transport and application layer, DNP3.0 is adopted because of its flexibility and compatible feature. Using the DNPC protocol, the power system automation is realized.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.677-680
• /
• 2003

In this paper, the analysis of practical end-to-end delay in worst case is performed for distributed control system considering the implementation of the system. The control system delay is composed of the delay caused by multi-task scheduling of operating system, the delay caused by network communication, and the delay caused by the asynchronous between them. Through simulation tests based on CAN(Controller Area Network), the proposed end-to-end delay in worst case is validated. Additionally, online clock synchronization algorithm is proposed here for the control system. Through another simulation test, the online algorithm is proved to have better performance than offline one in the view of network bandwidth utilization.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.52.3-52
• /
• 2001

There are some problems to implement a realtime network system with Ethernet because the MAC(Medium Access Control) of Ethernet uses a CSMA/CD protocol, which introduces unexpected delays. In this paper, we designed a method to solve problems due to the Ethernet MAC. This method introduces a pseudo-MAC in application layer to support the real-time feature. So the presented method doesn´t need any modifications of protocols such as UDP/IP/MAC. The presented pseudo-MAC is based on both a token passing protocol and a publisher-subscriber protocol. The suggested realtime protocol is implemented and tested practically in a local area network. The proposed real-time network consists of a token controller node and general nodes.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.10
• /
• pp.1448-1453
• /
• 2015

In this paper, we propose an alternative method of communication to improve the reliability of in-vehicle networks by jointly using wireless communication networks. Wired Communication networks have been used in vehicles for the monitoring and the control of vehicle motion, however, the disconnection of wires or hardware fault of networks may cause a critical problem in vehicles. If the network manager detects a disconnection or faults in wired in-vehicle network like the Controller Area Network(CAN), it can redirect the communication path from the wired to the wireless communication like the Zigbee network. To show the validity and the effectiveness of the proposed in-vehicle network architecture, we implement the Electronic Stability Control(ESC) system as ECU-In-the-Loop Simulation(EILS) and verify that the control performance can be kept well even if some hardware faults like disconnection of wires occur.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.435-438
• /
• 2012

Today, In all fields, As combination of ubiquitous computing-based technologies between electronic space and physical space, has been active trend research about wireless integration sensor network between sensors and wireless technology. Also, but in ship is underway research about Ship Area Network(SAN) of intelligent ship to integrate wireless technology, ship is required SAN-bridge technology of a variety of wired, wireless network integration and heterogeneous sensor and interoperability of the controller and SAN configuration management technology of remote control. Ship keep safe of all the surrounding environment including crew besides structural safety and freight management monitoring. In this paper, for monitoring design such as on climate change detection and temperature, pressure about various structures, there identify technology trends for routing and data aggregation to use energy efficiency in wireless sensor network. And to analyze self-organizing clustering method, study For wireless sensor network configuration in ship.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.380-383
• /
• 2004

본 논문에서는 CAN(Controller Area Network) 통신을 이용한 전 디지털 UPS시스템의 병렬제어에 대해 기술한다. UPS 주제어기인 DSP 내부에 실장된 CAN모듈을 이용하여 별도의 상위제어기가 없는 효과적이고 간단한 UPS의 병렬제어 시스템을 제시하며 특히 고조파 순환전류를 제거하기 위한 PWM 동기 방법을 제안하고 시험을 통해 제안한 방법의 타당성을 입증하였다.