• Korean journal of applied entomology
• /
• v.57 no.4
• /
• pp.339-345
• /
• 2018

The sugar beet cyst nematode (SBCN), Heterodera schachtii first detected in Taebaek, Gangwon-do in 2011, is one of the major plant parasitic nematodes that cause economic damage to the Chinese cabbage in highland regions. In addition, the distribution of clover cyst nematode (CCN), H. trifolii was confirmed in the highland Chinese cabbage cultivated regions in 2017. In order to investigate the spread of cyst nematodes, this study has been conducted since 2013 in the highland Chinese cabbage cultivation area. In addition, in 2017, the Real-Time PCR technique with the species-specific primer was used to investigate those two cyst nematodes and the soybean cyst nematode (SCN), H. glycines which is known for its distribution in Korea, focusing on the main production regions of highland Chinese cabbage cultivation. The number of infected fields in the Chinese cabbage plantation in highland increased every year to confirm distribution in Taebaek, Samcheok, Jeongseon and Gangneung in 2017, and the cumulative number of infection fields reached 245 by 2017. Of the 41 possible cyst nematode samples for PCR analysis, 61% were CCN, only 9.8% of the SBCN and 29.3% of the SCN were identified. Therefore, some of the previously known SBCN or CCN discoveries are likely to have been infected with SCN. It is believed that the CCN needs to be controlled in the future as CCN have been found to be dominant species in the highland Chinese cabbage plantation regions.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.1
• /
• pp.1-28
• /
• 2019

This study analyzed the density and mortality rate of Korean fir at 9 sites where individuals of Korean firs were marked into the live and dead trees with coordinates on orthorectified aerial images by digital photogrammetric system. As a result of the analysis, Korean fir in each site showed considerable heterogeneity in density and mortality rate depending on the location within site. This make it possible to assume that death of Korean fir can occur by specific factors that vary depending on the location. Based on the analyzed densities and mortality rates of Korea fir, we investigated the correlation between topographic factors such as altitude, terrain slope, drainage network, solar radiation, aspect and the death of Korean fir. The density of Korean fir increases with altitude, and the mortality rate also increases. A negative correlation is found between the terrain slope and the mortality rate, and the mortality rate is higher in the gentle slope where the drainage network is less developed. In addition, it is recognized that depending on the aspect, the mortality rate varies greatly, and the mean solar radiation is higher in live Korean fir-dominant area than in dead Korean fir-dominant area. Overall, the mortality rate of Korean fir in Mt. Halla area is relatively higher in areas with relatively low terrain slope and low solar radiation. Considering the results of previous studies that the terrain slope has a strong negative correlation with soil moisture and the relationship between solar radiation and evaporation, these results lead us to infer that excess soil moisture is the cause of Korean fir mortality. These inferences are supported by a series of climate change phenomena such as precipitation increase, evaporation decrease, and reduced sunshine duration in the Korean peninsula including Jeju Island, increase in mortality rate along with increased precipitation according to the elevation of Mt. Halla and the vegetation change in the mountain. It is expected that the spatial patterns in the density and mortality rate of Korean fir, which are controlled by topography such as altitude, slope, aspect, solar radiation, drainage network, can be used as spatial variables in future numerical modeling studies on the death or decline of Korean fir. In addition, the method of forest distribution survey using the orthorectified aerial images can be widely used as a numerical monitoring technique in long - term vegetation change research.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.167-175
• /
• 2019

To effectively deal with the fire in tunnel which is mostly the vehicle fire, it's more important to suppress the fire at early stage. In urban tunnel, however, accessibility to the scene of fire by the fire fighter is very limited due to severe traffic congestion which causes the difficulty with firefighting activity in timely manner and such a problem would be further worsened in underground road (double-deck tunnel) which has been increasingly extended and deepened. In preparation for the disaster in Korea, the range of life safety facilities for installation is defined based on category of the extension and fire protection referring to risk hazard index which is determined depending on tunnel length and conditions, and particularly to directly deal with the tunnel fire, fire extinguisher, indoor hydrant and sprinkler are designated as the mandatory facilities depending on category. But such fire extinguishing installations are found inappropriate functionally and technically and thus the measure to improve the system needs to be taken. Particularly in a double-deck tunnel which accommodates the traffic in both directions within a single tunnel of which section is divided by intermediate slab, the facility or the system which functions more rapidly and effectively is more than important. This study, thus, is intended to supplement the problems with existing tunnel life safety system (fire extinguishing) and develop the remote-controlled automatic fire extinguishing system which is optimized for a double-deck tunnel. Consequently, the system considering low floor height and extended length as well as indoor hydrant for a wide range of use have been developed together with the performance verification and the process for commercialization before applying to the tunnel is underway now.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.1
• /
• pp.57-75
• /
• 2019

Soundscapes have the potential to help people experience the historical background and cultural traditions by the scenery of a local area and to be used as a cultural and tourism resource. This concept was first explained in detail by M. Schafer and has been developed as a new way of experiencing landscapes using various senses. This research studied the soundscape of Kyodong Island, the so-called "Island of Peace" and designed new cultural acoustic content for education and tourism. Kyodong Island is located right below the Northern Limit Line and the whole island is in the Civilian Controlled Area. The political and economic status of the island has been changed dynamically by the Korean War and the division of the country. These days, the island needs to realize the vision of the "Island of Peace" in a more creative way using local resources, including its "cold war landscape" and the natural scenery of the region. This research applied the concept of a soundscape to document the island, and to reproduce it in an artistic way. A workshop was conducted to learn concepts and techniques of soundscapes with a sound artist. Listening, recording, conducting interviews, and literature research was used to study the soundscape of the island. After that, this research reconstructed the soundscape of the island through a soundscape composition. The main theme of the composition story was the "Hope and Wish for the Harmony and Peace" to show the vision of the "Island of Peace". The initial sub-theme for the introduction part was "First Encounter with Kyodong Island" arranging the representative soundscape, which could be the first impression of the region. The second sub-theme was "War and Tension" using several soundscapes as a metaphor for the tragedy of the Korean War. The third sub-theme was "Everyday Life of Kyodong Island" which described the energy of the present day, after the wounds of the war have healed. The final sub-theme was "Harmony and Peace" using traditional music and keynote sounds of the region as a reminder of the peaceful past, before the war. The recording files were documented as two types of sound maps. One was a two-dimensional map to show the soundscapes from one point of view, and the other used the online application called "Sound Around You". The final artwork was displayed at an exhibition and uploaded on YouTube to be shared publicly. Through this project, we discovered the potential of soundscapes as a medium to preserve the history and local identity, as well as presenting a new vision. The artwork will be exhibited at historically and culturally meaningful places on the Island to utilize the underused places as local tourist attractions and educational resources.

• Food Engineering Progress
• /
• v.21 no.4
• /
• pp.351-359
• /
• 2017

This study investigates the quality characteristics of dough and bread added with 6% chestnut shell powder and extruded chestnut shell powder at various conditions. As extrusion process variables, melt temperature ($110^{\circ}C$, $130^{\circ}C$, $150^{\circ}C$) and moisture (25% and 30%) were controlled. Total dietary fiber content was slightly increased in extruded chestnut shell powder group. In the farinogram, absorption was significantly increased in the group of 25% moisture content and 30% moisture content (p<0.05). After 2 hours and 3 hours, the leavening heights of dough for control showed a similar tendency to that of dough with extruded chestnut shell at a melt temperature $150^{\circ}C$ and with moisture content of 25% and 30%. Specific volume was the highest at a control of $3.74{\pm}0.08cc/g$ and extruded chestnut shell powder group was slightly higher than the chestnut shell powder group. Firmness after 1 day on control of $107.42{\pm}14.52g$ was similar to that of the bread with extruded chestnut shell at a temperature of $150^{\circ}C$ and moisture content of 25% for $113.33{\pm}6.17g$. In conclusion, the extrusion-cooking of chestnut shell powder improved the quality characteristics of dough and bread. The optimum combinations of conditions in tested range were melt temperature at $150^{\circ}C$ and moisture content at 25%, and melt temperature at $130^{\circ}C$ and moisture content at 30%.

• Korean Journal of Plant Resources
• /
• v.32 no.4
• /
• pp.312-317
• /
• 2019

This study was conducted with the purpose of examining the suitability of Euphorbia jolkinii Boiss. as cut flower, so that it may be introduced as a new ornamental crop. For this purpose, effect of various holding solutions on vase solution uptake rate, vase life, and relative fresh weight of cut flowering branches of E. jolkinii was examined. After harvest, cut branches were treated with 10, 50, and $100mg{\cdot}L^{-1}$ of 8-hydroxyquinoline sulfate (8-HQS), 0.1 and 0.2 mM of silver thiosulfate (STS), Chrysal, and Floralife. The cut branches of E. jolkinii were placed under the environmental conditions maintained at air temperature of $22.6^{\circ}C$, relative humidity of 45%, and 9/15h photoperiod that was controlled using fluorescent lamps (light intensity of $9.89{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$). A holding solution containing $10mg{\cdot}L^{-1}$ 8-HQS was found to be significantly effective for vase solution uptake rate compared to control, $50mg{\cdot}L^{-1}$ 8-HQS, and $100mg{\cdot}L^{-1}$ 8-HQS treatments. However, no significant difference was found in vase life between the branches treated with $10mg{\cdot}L^{-1}$ 8-HQS holding solution and branches of the control group. Increasing holding solution concentrations of STS was found to have negative effect on the vase life of cut E. jolkinii branches. Relative fresh weight of cut E. jolkinii branches were significantly decreased by two commercial holding solutions, Chrysal and Floralife. It is expected that these results would aid further studies on utilization of E. jolkinii as cut flower crop.

• Economic and Environmental Geology
• /
• v.54 no.1
• /
• pp.105-115
• /
• 2021

The geological CO2 sequestration in underground geological formation such as deep saline aquifers and depleted hydrocarbon reservoirs is one of the most promising options for reducing the atmospheric CO2 emissions. The process in geological CO2 sequestration involves injection of supercritical CO2 (scCO2) into porous media saturated with pore water and initiates CO2 flooding with immiscible displacement. The CO2 migration and distribution, and, consequently, the displacement efficiency is governed by the interaction of fluids. Especially, the viscous force and capillary force are controlled by geological formation conditions and injection conditions. This study aimed to estimate the effects of surfactant on interfacial tension between the immiscible fluids, scCO2 and porewater, under high pressure and high temperature conditions by using a pair of proxy fluids under standard conditions through pendant drop method. It also aimed to observe migration and distribution patterns of the immiscible fluids and estimate the effects of surfactant concentrations on the displacement efficiency of scCO2. Micromodel experiments were conducted by applying n-hexane and deionized water as proxy fluids for scCO2 and porewater. In order to quantitatively analyze the immiscible displacement phenomena by n-hexane injection in pore network, the images of migration and distribution pattern of the two fluids are acquired through a imaging system. The experimental results revealed that the addition of surfactants sharply reduces the interfacial tension between hexane and deionized water at low concentrations and approaches a constant value as the concentration increases. Also it was found that, by directly affecting the flow path of the flooding fluid at the pore scale in the porous medium, the surfactant showed the identical effect on the displacement efficiency of n-hexane at equilibrium state. The experimental observation results could provide important fundamental information on immiscible displacement of fluids in porous media and suggest the potential to improve the displacement efficiency of scCO2 by using surfactants.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.813-823
• /
• 2020

Purpose: In order to maximize the stability and productivity of the work through simulation prior to high-risk facilities and high-cost work such as dismantling the facilities inside the reactor, we intend to use digital twin technology that can be closely controlled by simulating the specifications of the actual control equipment. Motion control errors, which can be caused by the time gap between precision control equipment and simulation in applying digital twin technology, can cause hazards such as collisions between hazardous facilities and control equipment. In order to eliminate and control these situations, prior research is needed. Method: Unity 3D is currently the most popular engine used to develop simulations. However, there are control errors that can be caused by time correction within Unity 3D engines. The error is expected in many environments and may vary depending on the development environment, such as system specifications. To demonstrate this, we develop crash simulations using Unity 3D engines, which conduct collision experiments under various conditions, organize and analyze the resulting results, and derive tolerances for precision control equipment based on them. Result: In experiments with collision experiment simulation, the time correction in 1/1000 seconds of an engine internal function call results in a unit-hour distance error in the movement control of the collision objects and the distance error is proportional to the velocity of the collision. Conclusion: Remote decomposition simulators using digital twin technology are considered to require limitations of the speed of movement according to the required precision of the precision control devices in the hardware and software environment and manual control. In addition, the size of modeling data such as system development environment, hardware specifications and simulations imitated control equipment and facilities must also be taken into account, available and acceptable errors of operational control equipment and the speed required of work.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.3
• /
• pp.31-39
• /
• 2021

In this study, the fiber blending ratio and strain rate effect on the tensile properties synergy effect of hybrid fiber reinforced cement composite was evaluated. Hooked steel fiber(HSF) and smooth steel fiber(SSF) were used for reinforcing fiber. The fiber blending ratio of HSF+SSF were 1.5+0.5, 1.0+1.0 and 0.5+1.5vol.%. As a results, in the cement composite(HSF2.0) reinforced with HSF, as the strain rate increases, the tensile stress sharply decreased after the peak stress because of the decrease in the number of straightened pull-out fibers by increase of micro cracks in the matrix around HSF. When 0.5 vol.% of SSF was mixed, the micro cracks was effectively controlled at the static rate, but it was not effective in controlling micro cracks and improving the pull-out resistance of HSF at the high rate. On the other hand, the specimen(HSF1.0SSF1.0) in which 1.0vol.% HSF and 1.0vol.% SSF were mixed, each fibers controls against micro and macro cracks, and SSF improves the pull-out resistance of HSF effectively. Thus, the fiber blending effect of the strain capacity and energy absorption capacity was significantly increased at the high rate, and it showed the highest dynamic increase factor of the tensile strength, strain capacity and peak toughness. On the other hand, the incorporation of 1.5 vol.% SSF increases the number of fibers in the matrix and improves the pull-out resistance of HSF, resulting in the highest fiber blending effect of tensile strength and softening toughness. But as a low volume fraction of HSF which controlling macro crack, it was not effective for synergy of strain capacity and peak toughness.

• The Korean Society of Law and Medicine
• /
• v.21 no.2
• /
• pp.163-207
• /
• 2020

Korea has been positioned as the leading country in the industry of clinical trials as the clinical trail of Korea has developed for the recent 10 years. Clinical trial has plays a significant role in the development of medicine and the increase of curability. However, it has inevitable risk as the purpose of the clinical trial is to prove the safety and effectiveness of new drugs. Therefore, the clinical trial should be controlled properly to protect the health of the subjects of clinical trial and to ensure that they exercise a right of self-determination. In this context, the fiduciary duties of doctors who conduct clinical trials is especially important. The Pharmaceutical Affairs Act and the relevant regulations define several duties of doctors who conduct clinical trials. In particular, the duty to protection of subjects and the duty to provide information constitute the main fiduciary duties to the subjects. Those are essentially similar to the fiduciary duties of doctors in usual treatment from the perspective of the values promoted by the law and the content of the law. Nonetheless, clinical trials put more emphasis on the duties to provide explanation than in usual treatment. Further research and study are required to establish the concrete standard for the duty of care. However, if the blind pursuit of higher standards for the duty of care or to pass the burden of proof to doctors may result in disrupting the development of clinical trials, limiting the accessibility of patients to new treatment and even violating the principle of sharing damage equally and properly. In addition to these duties, the laws of clinical trials define several duties of doctors. Any decision on whether the violation of the law constitutes the violation of the fiduciary duty and justifies the demand for compensation of damages should be based on whether relevant law aims to protect the safety and benefit of subjects, even if in an incidental way, the degree to which such violation breaches the values promoted by the law and the concrete of violation of benefit of law, the detailed acts of such violation. The legal interests of the subjects can be protected effectively by guaranteeing compliance with those duties and establishing judicial and administrative controls to ensure that the benefit of subjects are protected properly in individual cases.