• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3378-3382
• /
• 2012

A superhydrophobic surface with a water contact angle > $150^{\circ}$ has attracted great interest from both fundamental and practical aspects. In this study, we demonstrated that hydrophobicity of a silica nanotube (SNT) array can be easily controlled by the SNT aspect ratio. In addition, the adhesive and anti-adhesive properties were controlled without modifying the hydrophobic surface. Various silica structures on a polydimethylsiloxane substrate were prepared using the desired alumina template. Bundle-arrayed and bowl-arrayed silica surfaces exhibited extraordinary superhydrophobicity due to the large frontal surface area and hierarchical micro/nanostructure. As the strategy used in this study is biocompatible and a wide range of hydrophobicities are capable of being controlled by the SNT aspect ratio, a hydrophobic surface composed of an SNT array could be an attractive candidate for bioapplications, such as cell and protein chips.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.761-767
• /
• 1993

A precision planting system using computer controlled technology for mulching cultivation was developed and tested . The system consisting of a micro-computer, several optical fiber sensors and control actuators realized the mechanization of the precision planting operation. The film hole positions, existences of a seed on shutter were detected and the planting speed was measured. The shutter opening mechanism and a seed metering device driven by a stepping motor were controlled, automatically . The planting timing of the shutter opening mechanism were analyzed from a video camera motion analysis, theoretically. The results showed a sufficient accuracy of a seed planted into the center a film hole with a variety of planting speeded. The gravity point positions in film hole of seeds planted by the system just were within the area of +-5mm of the hole center when the hole diameter was 40mm.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2528-2530
• /
• 2005

In this paper, a study on the analysis and design of an electro-hydraulic pressure reducing valve for active suspension system of car is fulfilled. Also, the structurally improved direct-acting electro-hydraulic pressure reducing valve is proposed to satisfy the performance that active suspension system requires. To prove the possibility whether the proposed valve can be used for active suspension system or not, the mathematical modeling and analysis for this valve is fulfilled and the experiment of response to controlled pressure is achieved. Here we conformed the response speed to controlled pressure of the structurally improved valve changed for the better by modifying the shape of spool such as the structure which make use of the power of controlled pressure derived from the area difference between two section areas of valve spool.

• Journal of Industrial Technology
• /
• v.24 no.B
• /
• pp.157-161
• /
• 2004

This paper proposes an algorithm of CAD data extraction for the computer controlled marking system. In general, logo has been directly designed at the marking controller, but that is not an effective method because of the very limited working area. In this paper, for the data extraction we used a general PC and Auto CAD for logo design, and developed the software with GUI(Graphic User Interface) method. Then the data is transferred to the marking controller for marking on the object. With experimental result we showed the proposed algorithm to be very effective in the computer controlled marking system.

• The Korean Journal of Pain
• /
• v.2 no.1
• /
• pp.85-88
• /
• 1989

We experienced 3 cases of continuous caudal block. The first case had suffered from severe pain of the external genitalis after urethral injury from a car accident and this was controlled by continuous caudal block. The other 2 cases were a metastaric malignant tumor of the lumbar vertebra from cancer of the cervix and histiocytoma of the breast, and both had suffered from intractable pain of the lower extremity. But lumbar epidural block was impossible because of radiation fibrosis and previous operation scar of the spine. So a continuous caudal block was performed and the pain was controlled effectively. The longest duration was 50 days and there were no problems related catheter indwelling. Pain in the area of the lumbar and sacral nerve distribution can be controlled by continuous caudal block. Here in we reported 3 cases and reviewed the literature.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.210-214
• /
• 1998

Radio-Controlled helicopter has superior movement abilities like as hovering or backward move. So it has been used as a sprinkler of agricultural medicines or an observer of dangerous area such as a volcano, etc. But its operation is not simple because it has many control factors and they interfere with each other. Therefore the helicopter is not controlled by simple theory in the case of automatic operation. Then fuzzy sliding mode control, which has fastness, fineness and robustness, is thought to be suitable to satisfy various requirements of the helicopter operation. In this work, the fuzzy sliding mode control was applied to the flying of RC helicopter, As tile result, it was controlled with good performance.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.906-909
• /
• 2003

This paper proposes an algorithm of CAD data extraction for the computer controlled making system. In general logo is directly designed at the marking controller, but that is not an effective method because of the very limited working area. In this paper, for the data extraction we used a general PC and Auto CAD for logo design, and developed the software with GUI(Graphic User Interface) method. Then the data is transferred to the marking controller for marking on the object. With experimental result we showed the proposed algorithm to be very effective in the computer controlled marking system.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.2
• /
• pp.141-152
• /
• 2011

This study was investigated the species composition of demersal fishes by a bottom trawler GAYA, in order to be used basic data for resources management of fishery in the jointly controlled waters of the West sea. We caught 39 species, 5,532 individuals and 322.518kg in biomass. The number of species was the fewest of the jointly controlled waters of the East china sea and boundary zone between Busan and Tsushima. The first dominant species in individuals in summer was Oregonia gracilis, and in biomass was angler. But angler was the first dominant species in 7 stations of 12 stations. It was a peculiar phenomenon that cod which lives in a cold current was caught in the northern part of the West sea. In this connection it seems to be needs for oceanographic research. Catch per unit effort (kg/hr) of bottom trawl was the higher in northern part and in right line of all surveyed area respectively.

• Journal of Pharmaceutical Investigation
• /
• v.20 no.2
• /
• pp.89-95
• /
• 1990

Ethylcellulose-PEG 4000 film coated on core tablets was investigated as a potential drug delivery system for the controlled release of chlorpheniramine maleate (CPM). The kinetic analysis of the release data indicated that CPM release followed a diffusion-controlled model, where the quantity released per unit area is proportional to the square root of time. The effect of the film composition, CPM concentration, plasticizer concentration and CPM solubility on the release characteristics were examined. The release rate constant increased as CPM concentration increased. It also increased as the PEG 4000 content in the film increased above 10%(w/w), however, it decreased as the PEG 4000 content increased in the concentration range below 10%(w/w). The release rate constant was not affected by the coated weight on the core tablet. The film-coated tablets which contain CPM only in the coated film layer seemed to be a potential oral drug delivery system for the controlled release of CPM.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1997.06a
• /
• pp.113-118
• /
• 1997

This paper proposes a object tracking method based on the local moments, or moment based on the local moments, or moment of some restricted area, in which the idea of the viewpoint and the visual filed corresponding to the local area of an image is introduced. Using local moment with the optimally controlled viewpoint and visual field, the target position and its breadth are estimated robustly. By two experiments, the validity of the proposed method is shown.