• Journal of the Korean Electrochemical Society
• /
• v.10 no.3
• /
• pp.203-206
• /
• 2007

Electrochemical reaction of glucose was regulated by the electrochemically active area of nanoporous platinum, which is controlled by ionic strength. The profile of the oxidation current of glucose vs. ionic strength was identical with that of the electrochemically active area. This result confirms that the nanopores are virtually opened for the electrochemical reaction of glucose when the ionic strength climbs over a specific concentration and implies that the electrochemical reactions on nanoporous electrode surfaces can be controlled by concentration of electrolyte.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1243-1246
• /
• 2003

It is known that structure of Human's brain information system is controlled by cerebral cortex mainly. Cerebral cortex is divided by sensory area, motor area and associated area largely. Sensory area takes part in information from environment and motor area is actuation by decision as associated area determined. It is possible to copy brain information system by input-output pattern. but there is difficulty in modeling of memorizing new information. Such action is performed by Limbic Lobe and Papez circuit which is controlled by intrinsic emotion. So we need of definition of emotion's role in decision. In this paper, we define roles of emotion in intrinsic decision using Dynamic Cognitive Maps(DCMs). The emotion is evaluated by outside information then intrinsic decision performed as how much emotion variated. The dynamic cognitive maps take part in emotion evaluating process.

• Nutrition Research and Practice
• /
• v.1 no.2
• /
• pp.143-149
• /
• 2007

Inadequate dietary intakes and poor health behaviors are of concern among rural residents in Korea. This study is conducted to compare dietary intakes, dietary diversity score (DDS), mean nutrient adequacy ratio (MAR) and health related behaviors by rural, factory and urban areas in Asan. A total of 930 adults (351 men and 579 women) were interviewed to assess social economic status (SES), health related behaviors and food intakes by a 24-hour recall method. Mean age was 61.5 years with men being older (64.8 years) than women (59.3 years, p<0.001). Men in the factory area were older than rural or urban men while urban women were the youngest. Education and income of urban residents were higher than other area residents. There were more current drinkers in urban area while smoking status was not different by regions. Physical activity was significantly higher in rural or factory areas, whilst urban residents exercised more often (p<0.05). Rural or factory area residents considered themselves less healthy than others while perceived stress was lower than urban residents. Energy intakes were higher in urban residents or in men, however, after SES was controlled, energy intake did not show any differences. Energy-adjusted nutrient intakes were significantly higher in the urban area (p<0.05) for most nutrients except for carbohydrate, niacin, folic acid, vitamin $B_6$, iron and fiber. Sodium intake was higher in factory area than in other areas after SES was controlled. DDS of rural men and MAR of both men and women in the rural area were significantly lower when SES was controlled. In conclusion, dietary intakes, diversity, adequacy and perceived health were poor in the rural area, although other health behaviors such as drinking and perceived stress were better than in the urban area. In order to improve perceived health of rural residents, good nutrition and exercise education programs are recommended.

• Journal of Fisheries and Marine Sciences Education
• /
• v.10 no.2
• /
• pp.139-161
• /
• 1998

This thesis includes a study on the legal regulation, the system and formalities on the control of illegal fishing. And the author analyzed the details of the lists of illegal fishing controlled by fishing patrol vessels of Ministry of Maritime Affairs and Fisheries from 1994 to 1996 in adjacent sea area of Korea. The results are summarized as follows ; 1. The fishing patrol vessels controlled total 826 cases in 2,726 days of 292 voyages by 17 vessels in 1994, total 1,086 cases in 3,060 days of 333 voyages by 18 vessels in 1995 and total 933 cases in 3,126 days of 330 voyages by 19 vessels in 1996. 2. The fishing period of illegal fishing was generally concentrated from April to September. But year after year, illegal fishing was scattered throughout the year. 3. The most controlled sea area of illegal fishing was the south central sea area in the sea near Port of Tongyeong. The sea area occupied about 36~51% of totality and the controlled cases were gradually increased every year. The second was the south western sea area in the sea near Port of Yosu. The sea area occupied about 18-27% and the controlled cases were a little bit increased every year. The third was the south eastern sea area in the sea near Pusan. The sea area occupied about 13~23% and the controlled cases were gradually decreased year by year. 4. The most controlled kind of illegal fishing was the small size bottom trawl. This occupied about 81-95% of totality and the controlled cases were gradually increased year by year. The second was the medium size bottom trawl. This occupied about 4-7% and the controlled cases were gradually decreased year by year. The third was the trawl of the coastal sea, this occupied about 2~4% and the controlled cases were a little bit decreased every year. 5. The most controlled address of illegal fishing manager was Pusan city which occupied about 33-51% of totality. The second was Cheonnam which occupied about 24-29%. The third was Kyungnam which occupied about 16~35%. 6. The most controlled violation of regulations was Article 57 of the Fisheries Act which occupied about 56-64% of totality. The second was Article 23 of Protectorate for Fisheries Resources which occupied about 21-36%. And the controlled cases by it were gradually increased every year.

• Transactions of Materials Processing
• /
• v.15 no.8 s.89
• /
• pp.603-608
• /
• 2006

The main purpose of the present study has been placed on investigating the mechanical properties and microstructures of C-Si-Mn-V steels for cold forming manufactured by controlled rolling and cooling technology. The steels were manufactured in electric arc furnace (EAF) and casted to $160{\times}160mm$ billet. The billets were reheated in walking beam furnace and rolled to coil, the stocks were rolled by Controlled Rolling and Cooling Technology (CRCT), so rolled at low temperature by water spraying applied in rolling stage and acceleratly cooled before coiling. Rolled coils were cold drawed to the degree of 16%, 27% of area reduction respectively without heat treatment. Microstructual observation, tensile test, compression test and charpy impact tests were conducted. The mechanical properties of the steels were changed by area reduction of cold drawing and it is founded that there are optimum level of cold drawing to minimize compression stress for these steels. From the result of this study, it is conformed that $80kg_{f}/mm^{2},\;90kg_{f}/mm^{2}$ grade high strength microalloyed steel for cold forming are developed by accelerated cooling and optimum cold drawing.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.321-324
• /
• 2005

The main purpose of the present study has been placed on investigating the effects of controlled rolling and cooling on the microstructures and mechanical properties of C-Si-Mn-V steels for cold forming. The steels were manufactured in vacuum induction melting(VIM) furnace and casted to 1.1ton Ingots and the ingots were forged to $\Box150$ billet. The forged billets were reheated in walking beam furnace and rolled to coil, the stocks were rolled by Controlled Rolling and Cooling Technology (CRCT), so rolled at low temperature by water spraying applied in rolling stage and acceleratly cooled before coiling. Rolled coils were cold drawed to the degree of $27\%$ of area reduction without heat treatment. Microstructual observation, tensile test, compression test and charpy impact tests were conducted. The mechanical properties of the steels were changed by area reduction of cold drawing and it is founded that there are optimum level of cold drawing to minimize compression stress for these steels. From the result of this study, it is conformed that mechanical properties and microstructure of C-Si-Mn-V steels for cold forming were enhanced by accelerated cooling and founded optimum level of cold drawing.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2010.04a
• /
• pp.289-290
• /
• 2010

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.1
• /
• pp.9-16
• /
• 2010

This paper presents supervisor control methods at a matrix converter controlled overhead crane system based on a controller area network (CAN). Four induction motors are used to drive the gantry, trolley, and hoist at he crane and each motor is controlled by the matrix converter with direct torque control (DTC). Both the position control algorithm and the supervisor control system using CAN are introduced. Simulation and experimental results are carried out to verify the performance of position control at the matrix converter controlled crane system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.05a
• /
• pp.159-162
• /
• 2002

In this paper the stress-strain curves of bearing steels at hot working conditions are obtained by compression test with a computer controlled servo-hydraulic Gleeble 3800 testing machine and elongations and reductions of area of the bearing steels are obtained by tensile test with a computer controlled servo-hydraulic Gleeble 1500 testing machine. These tests have been focused to obtain the flow stress data and optimal hot forging conditions under various conditions of strain rates and temperatures. The strain rate sensitivity exponent and reduction of area of the materials are evaluated. Experimental results are resented for various conditions of temperatures and strain rates.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.9 s.339
• /
• pp.35-40
• /
• 2005

A digitally controlled phase-locked loop (DCPLL) is described. The DCPLL has basically the same structure as a conventional analog PLL except for a tracking analog-to-digital converter (ADC). The tracking ADC generates the control signal for voltage controlled oscillator. Since the DCPLL employs neither digitally controlled oscillator nor time-to-digital converter-the key building blocks of digital PLL (DPLL), there is no need for the 03de-off between jitter, power consumption and silicon area. The DCPLL was implemented in a $0.18\mu$m CMOS process and the active area is 1mm $\times$0.35 mm The DCPLL consumes S9mW during the normal opuation and $984\{mu}W$ during the power-down mode from a 1.8V supply. The DCPLL shows 16.8ps ms jitter.