• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1488-1490
• /
• 2008

The gyroscope is the sensor for detecting the rotation in inertial reference frame and constitute the navigation system together an accelerometer. As the inertial reference equipment for attitude determination and control in the satellite, the mechanical gyroscope has been used but it bring the disturbance for mass unbalance so the disturbance give a bad influence to the observation satellite mission because the mechanical gyroscope has the rotation parts. During the launch, The mechanical gyroscope is weak in vibration, shock and has the defect of narrow operating temperature range so it need the special design in integration. Recently the low orbit observation satellite for seeking the high pointing accuracy of image camera payload accept the FOG(Fiber Optic Gyro) or RLG(Ring Laser Gyro) for the attitude determination and control. The Ring Laser Gyro makes use of the Sanac effect within a resonant ring cavity of a He-Ne laser and has more accuracy than the other gyros. It need the 1000V DC to create the He-Ne plasma in discharge tube. In this paper, the design process of the High Voltage Power Supply for RLG(Ring Laser Gyroscope) is described. The specification for High Voltage Power Supply(HVPS) is proposed. Also, The analysis of flyback converter topology is explained. The Design for the HVPS is composed of the inverter circuit, feedback control circuit, high frequency switching transformer design and voltage doubler circuit.

• Tribology and Lubricants
• /
• v.19 no.6
• /
• pp.349-356
• /
• 2003

A damper floating ring seal with round hole pattern surfaces is suggested for better leakage control. The flat plate test of the round hole pattern surfaces has been performed to yield an empirical friction factor model. The exact predictions of the lock­up position of the damper floating ring, the leakage performance, and the rotordynamic coefficients of the seal are necessary to evaluate the rotordynamic performance of the turbo pump unit. The governing equations including the empirical friction factor model for round hole pattern surfaces are solved by the Fast Fourier Transform method. The lock­up position, leakage flow rate, and rotordynamic coefficients are evaluated according to the geometric parameters of the damper floating ring seal. Theoretical results show that the damper floating ring seals yield less leakage and better rotordynamic stability than the floating ring seal with a smooth surface.

• Transactions of Materials Processing
• /
• v.25 no.1
• /
• pp.5-11
• /
• 2016

The control of the roll velocities is essential in maintaining stability during ring rolling, but such control is difficult. The determination of the best roll velocities can be helped with the use of FE simulations and processing maps, which give the useful information such as power dissipation and flow instability for hot metal forming processes. In the current study, the workability of 7050 aluminum alloy is evaluated by using processing map. With the developed information, the stability of the ring rolling condition, called the Constant Growth Velocity Condition (CGVC), is evaluated.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.10
• /
• pp.2692-2707
• /
• 2012

A separable identity-based ring signature scheme has been constructed as a fundamental cryptographic primitive for protecting user privacy. Using the separability property, ring members can be selected from arbitrary domains, thereby, giving a signer a wide range of ways to control privacy. In this paper we propose a generic method to construct efficient identity-based ring signature schemes with various levels of separability. We first describe a method to efficiently construct an identity-based ring signature scheme for a single domain, in which a signer can select ring identities by choosing from identities defined only for the domain. Next, we present a generic method for linking ring signatures constructed for a single domain. Using this method, an identity-based ring signature scheme with a compact structure, supporting multiple arbitrary domains can be designed. We show that our method outperforms the best known schemes in terms of signature size and computational costs, and that the security model based on the separability of identity-based ring signatures, presented in this paper, is highly refined and effective by demonstrating the security of all of the proposed schemes, using a model with random oracles.

• Journal of Sensor Science and Technology
• /
• v.11 no.6
• /
• pp.365-370
• /
• 2002

The jumping ring apparatus described in this study is used to demonstrate and educate the effects of electromagnetic induction. Placing an aluminum ring over the core and switching on AC source causes the ring to jump in the air due to induced currents in the ring producing a magnetic field opposed to that produced in the core. This force is a function of flux density, ac current of ring and levitated height of the ring. Using photo sensor arrays, detect the ring position and represent the position of the ring to analog voltage for an education performance. This paper presents modelling of the jumping ring system and shows how does control signal generate in order to follow desired position.

• East Asian mathematical journal
• /
• v.36 no.5
• /
• pp.547-554
• /
• 2020

Synchronization of unidirectional identical FitzHugh-Nagumo systems coupled in a ring structure under ionic and external electrical stimulations is investigated. In this network, each neuron is only connected and transmit signals to its next neuron via synaptic strength called gapjunctions. Adaptive control theory and Lyapunov stability theory are used to propose a unique control scheme with necessary and sufficient conditions which guarantee the synchronization of the neuronal network. Finally, the effectiveness of the proposed scheme is shown through numerical simulations.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.4
• /
• pp.93-102
• /
• 2022

Purpose : The purpose of this study was to analyze the change in thickness of transvers abdominis, internal oblique, and external oblique when virtual reality based ring fit adventure is applied to young adults in order to investigate the effect of ring fit adventure on core stabilization. Methods : 30 subjects participated in the experiment. Subjects were randomly assigned to two groups. 15 subjects performed ring fit adventure core exercise (experimental group) and 15 subjects bridge and dead bug exercise (control group). The ring fit adventure core exercise program consists of 6 types, 1) bow pull, 2) overhead lunge twist, 3) pendulum bend, 4) seated ring raise, 5) plank, 6) warrior III pose. Each exercise was performed for 5 minutes, for a total of 30 minutes. The bridege and dead bug exercise were performed for 15 minutes each for a total of 30 minutes. All interventions were performed 3 times a week for 4 weeks. Thickness of the abdominal muscles was measured with a ultrasound. The paired t-test was used to compare the thickness of the transverse abdominis, internal oblique, and external oblique before and after intervention, and the comparison between groups was analyzed using the independent t-test. Results : As a result, in the experimental group, thickness of transverse abdominis and internal oblique increased significantly (p<.05), but external oblique decreased significantly (p<.05), and in the control group, thickness of transverse abdominis, internal oblique, and external oblique increased significantly (p<.05). There was a significant difference in external oblique in the difference between groups (p<.05). Conclusion : These study results showed that core exercise using ring fit adventure can reduce external oblique and increased selective muscle activity of transverse abdominis and internal oblique of the deep abdominal muscles, so it is meaningful as an effective intervention for core stabilization.

• Proceedings of the KIEE Conference
• /
• 2001.07e
• /
• pp.30-32
• /
• 2001

Thomson's jumping ring was first exhibited by Elihu Thomson in 1887 and modified to include the floating variation by John A. Fleming in 1890. This vivid demonstration of electromagnetic induction is still used in physics classrooms to illustrate Faraday's and Lenz's laws and is the basis for linear actuators for sorvo-mechanical purpose as well as induction heating and rail guns. The jumping ring apparatus of the type described in this study is used to demonstrate and educate the effects of electromagnetic induction. To verify control algorithm, a sensor system and a data control/measurement system is required. The sensor system consist of photo-interrupted and encode circuit which is designed to take voltage according to the position of ring.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1132-1137
• /
• 2001

The smart foam that is first proposed by Fuller(2) is not applicable to active noise control in a duct having flow. Thus. this paper presents the ring-type smart foam as an alternative. The ring-type smart foam consists of polyurethane acoustic foam of lining shape and PVDF film embedded along the mid-surface of the foam lining. A feedforward adaptive filtered-x LMS controller is used to minimize the signal from the error microphone. To enlarge quiet sound region. two error microphones are used to update system modeling filter (SIMO method). Sound intensity control using the ring-type smart foam is also discussed

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2344-2346
• /
• 2002

A vacuum control system has been developed for using Ethernet Multi Serial Device Severs (EMSDS) for the Pohang Accelerator Laboratory (PAL) storage ring. There are 124 vacuum ion pumps at the storage ring. It was a very important problem to solve the problem how to control such a big number of vacuum pumps distributed around the ring. After discussions, we decided to develop a serial to ethernet interrace device sever that will be mounted in the control system rack. It has a 32-bits microprocessor embedded Linux, 12 ports RS485 (or RS232) slave interface. one channel 10/100BaseTx ethernet host port, one channel UART host port, and 16 Mbytes large memory buffer. These vacuum pumps are connected to Ion-Pump serial controllers, which chop the AC current so as to control the current in the pumps. The EMSDS connect either 100BaseTx or 10BaseT ethernet networks to asynchronous serial ports for communication with serial device. It can simultaneously control up to 12 ion-pump serial controllers. 12 EMSDS are connected to a personal computer (PC) through the network. The PC can automatically control the EMSDS by sending a set of commands through the TCP/IP network. Upon receiving a command from a PC running under Windows2000 through the network, the EMSDS communicate through the stave serial interrace ports to ion-pump controller. We added some software components on the top of EPICS (Experimental Physics and Industrial Control System) toolkit.