• Journal of the Korean Vacuum Society
• /
• v.19 no.4
• /
• pp.243-248
• /
• 2010

Sonic nozzles have been a standard device for measurement of steady state gas flow, as recommended in ISO 9300. This paper introduces two sonic nozzles of diameter ${\Phi}$ 0.03 mm and ${\Phi}$ 0.2 mm precisely machined according to ISO 9300. The constant volume flow meter(CVFM), readily set up in the Vacuum center of KRISS. was used to calibrate the discharge coefficients of both nozzles. The calibration results were shown to determine them within the 3% expanded measurement uncertainty. Calibrated sonic nozzles were found to be applicable for precision measurement of steady state gas flow in the vacuum process in the ranges of 0.6~1,800 cc/min. Those flow conditions are equivalent to the fine gas flow with Reynolds numbers of 26~12,100. Those encouraging results confirm that calibrated sonic nozzles enable precision measurement of extremely low gas flow encountered very often in th vacuum processes. Both calibrated sonic nozzles are proven to provide the precision measurement of the volume flow rate of the dry vacuum pump within one percent difference in reference to CVFM. Calibrated sonic nozzles are applied to a new 'in-situ and in-field' equipment designed to measure the volume flow rate of vacuum pumps in the semiconductor and flat display processes. Furthermore, they can provide other applications to flow control devices in vacuum, such as MFC, etc.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.8
• /
• pp.1446-1451
• /
• 2016

Clostridium difficile toxin A causes acute gut inflammation in animals and humans. It is known to downregulate the tight junctions between colonic epithelial cells, allowing luminal contents to access body tissues and trigger acute immune responses. However, it is not yet known whether this loss of the barrier function is a critical factor in the progression of toxin A-induced pseudomembranous colitis. We previously showed that NADH:quinone oxidoreductase 1 (NQO1) KO (knockout) mice spontaneously display weak gut inflammation and a marked loss of colonic epithelial tight junctions. Moreover, NQO1 KO mice exhibited highly increased inflammatory responses compared with NQO1 WT (wild-type) control mice when subjected to DSS-induced experimental colitis. Here, we tested whether toxin A could also trigger more severe inflammatory responses in NQO1 KO mice compared with NQO1 WT mice. Indeed, our results show that C. difficile toxin A-mediated enteritis is significantly enhanced in NQO1 KO mice compared with NQO1 WT mice. The levels of fluid secretion, villus disruption, and epithelial cell apoptosis were also higher in toxin A-treated NQO1 KO mice compared with WT mice. The previous and present results collectively show that NQO1 is involved in the formation of tight junctions in the small intestine, and that defects in NQO1 enhance C. difficile toxin A-induced acute inflammatory responses, presumably via the loss of epithelial cell tight junctions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2689-2696
• /
• 2015

Radioactive isotopes which are manufactured using a cyclotron in a radioisotope used for radiation diagnosis is affected by the production yield according to size and shape of the beam and beam uniform degree from irradiated location when the proton beam investigated the target by cyclotron. Therefore, in this paper developed the BPM(Beam Profile Monitor) device capable of measuring the beam cross-section at the cyclotron beam line. It was configured so as to be able to remote control the BPM device in LabView and used the BPM program it was to be able to easily monitor and display to analyze the graph of two-dimensional graph and a three-dimensional beam distribution numerical information of the beam obtained while scanning the tungsten wire to the X and Y axis. The time it takes to measure the beam can be confirmed 37seconds when step motor driving speed was 2000pps. Through a beam readjusted based on the measured beam distribution information by optimizing the beam distribution it can be made to maximize the RI production yield and contribute supply stabilization.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.2
• /
• pp.107-116
• /
• 2016

Industrial robots have been usually controlled using text-based programming languages provided by each manufacturer with its button-based TP(Teaching Pendent) terminal. Unfortunately, when we consider that people who manipulate TPs in manufacturing sites are mostly unskilled with no background knowledge about computer programming, these text-based programming languages using button-based interaction on manufacturing sites are too difficult for them to learn and use. In order to overcome the weaknesses of the text-based programming language, we propose a visual programming language that can be easily used on gesture-enabled devices. Especially, in our visual programming environment, each command is represented as a block and robots are controlled by stacking those blocks using drag-and-drop gestures, which is easily learnable even by beginners. In this paper, we utilize a widely-spread device, Tablet PC as the gesture-enabled TP. Considering that Tablet PC has limited display space in contrast to PC environments, we designed different kinds of sets of command blocks and conducted user tests. Based on the experiment results, we propose an effective set of command blocks for Tablet PC environment.

• Horticultural Science & Technology
• /
• v.19 no.1
• /
• pp.71-77
• /
• 2001

Experiments were conducted to evaluate quality and vase life of cut rose 'Rote Rose' cultivated in soil or hydroponically in rockwool. Rose flower stems harvested in commercial greenhouses in Kimhae on May 27 and June 14, 1998 were transported for about two hours to a laboratory and recut in water to an uniform stem length of 45cm. The rose flowers harvested on the same day were displayed at a density of $10cm{\times}10cm$ and were subjected to the same environmental conditions in a growth chamber. The stems were put in four different preservative solutions, 0.5% Chrysal RVB, BS (2% sucrose+200ppm 8HQS+0.3% Chrysal RVB), Sonk1 (BS+0.1mM ethionine), and double distilled $H_2O$. Flower stems harvested on May 27 were displayed at $18{\pm}1^{\circ}C$, RH 60-70%, and light intensity of 220lux provided by fluorescent lamps for $16h{\cdot}d^{-1}$. Flower stems harvested on June 14 were displayed at $25{\pm}1^{\circ}C$, RH 70-80%, and light intensity of 220lux provided by fluorescent lamps for $16h{\cdot}d^{-1}$. Fresh weight and flower diameter were affected by cultivation method, and were greater in hydroponically-grown roses than in soil-grown roses. Among the preservative solutions, BS and Sonk1 were superior to Chrysal RVB in terms of prolonging vase life. Vase life extension in Chrysal RVB, BS and Sonk1 over the control was about one day in both display temperatures. At $18^{\circ}C$ vase life was maintained for three to four additional days as compared to that at $25^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.45-50
• /
• 2016

This paper reports a Ringer's solution detector and transceiver design for the efficient management of patients. The ringer's solution detection and transceiver consisted of the main control part, ringer's solution detection part, display and warning light part, wireless transceiver, and power supply part. The light receiving part of the ringer's solution detection part employed TSL260R-LF photodiode; light permeating part, Water-Clear type LED; and wireless transceiver part, the RF wireless data transceiver module, NR-FPCX. As a result of this Ringer's solution detector and transceiver design that can manage the patient efficiently, it was found that when the ringer's solution was detected by the double photodiode, the operating frequency was 11.95kHz; when it was not detected, the number was 9.6kHz. In the ringer's solution receiver, when the ringer's solution was detected, the number was 0. The corresponding unique RF code was displayed when not detected. The power used in the ringer's solution detection part was converted to the Sleep mode to operate under battery save mode. The ringer's solution transceiver can exchange wireless communication approximately within a 700m radius.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.3
• /
• pp.402-408
• /
• 2016

Master packaging system consists of an inner individual package and secondary outer package. During the stages of chilled transport and distribution, the combination of primary individual package and secondary package was used to maintain a modified atmosphere for shiitake mushrooms. During the retail stage at higher temperature ($25^{\circ}C$), the primary individual package was exposed to display conditions after dismantling of the secondary packaging. The master packaging system was constructed to contain eight individual $30-{\mu}m$ thick polypropylene film bags of 500 g shiitake mushrooms inside a $40-{\mu}m$ low-density polyethylene bag. Carbon dioxide absorbent material [$Ca(OH)_2$] and/or moisture absorbent (superabsorbent polymer) were designed in their required amounts based on respiration characteristics and then applied to the outer secondary packaging in sachet form. Gas concentration of the packaging, temperature, and humidity were monitored throughout transport and storage. The quality of shiitake mushrooms was measured at the retail stage to determine the packaging effect. During the distribution stage of 108 h, $O_2$ and $CO_2$ concentrations in the master packaging system were maintained at 9~11% and 1~4% in the inner packaging, respectively, which are good for quality preservation. Compared to the control, the master packaging with $CO_2$ and/or moisture absorbents improved mushroom preservation and particularly reduced decay.

• Korean Journal of Remote Sensing
• /
• v.14 no.4
• /
• pp.376-391
• /
• 1998

Images from satellites will have 1 to 3 meter ground resolution and will be very useful for analyzing current status of earth surface. An image processing system named GeoWatch with more intelligent image processing algorithms has been designed and implemented to support the detailed analysis of the land surface using high-resolution satellite imagery. The GeoWatch is a valuable tool for satellite image processing such as digitizing, geometric correction using ground control points, interactive enhancement, various transforms, arithmetic operations, calculating vegetation indices. It can be used for investigating various facts such as the change detection, land cover classification, capacity estimation of the industrial complex, urban information extraction, etc. using more intelligent analysis method with a variety of visual techniques. The strong points of this system are flexible algorithm-save-method for efficient handling of large size images (e.g. full scenes), automatic menu generation and powerful visual programming environment. Most of the existing image processing systems use general graphic user interfaces. In this paper we adopted visual program language for remotely sensed image processing for its powerful programmability and ease of use. This system is an integrated raster/vector analysis system and equipped with many useful functions such as vector overlay, flight simulation, 3D display, and object modeling techniques, etc. In addition to the modules for image and digital signal processing, the system provides many other utilities such as a toolbox and an interactive image editor. This paper also presents several cases of image analysis methods with AI (Artificial Intelligent) technique and design concept for visual programming environment.

• Cross-Cultural Studies
• /
• v.45
• /
• pp.269-293
• /
• 2016

This research studies the characteristics of the family systems of traditional societies in Black Africa. For this purpose, this study has chosen three subtopics: the distinctive features of traditional societies, marriage customs (polygamy and polyandry), and the societal features of patriarchal and matriarchal societies. First, we analyze men's and women's roles, ownership and management of the land, dowry, and social values of livestock as the distinctive features that support the family system in traditional Black African societies. These elements play an important role in increasing the number of family members. Next we analyze marriage customs-polygamy and polyandry-which increase the number of family members, on the one hand, and secure the labor force, on the other hand. Most traditional societies in Black Africa prectice polygamy. However, the $Bashil{\acute{e}}l{\acute{e}}$ and Bahima prectice polyandry. Polygamy in traditional societies in Black Africa is based on the traditional social customs that display the authority and dignity of the family head, who has control over all family members in both patrilineal and matrilineal societies. The authority and dignity of the family head are used to keep and increase the number of family members, that is, to secure the community firmly. Finally, most traditional societies are patrilineal. However, matrilineal societies are prevalent in the so-called Matrilineal Belt, which term refers to the savanna regions where Bantu peoples reside, that is, the coastal regions from the Angolan coast, bordering the Atlantic, to the Tanzanian and Mozambique coasts that border the Indian Ocean. These societies trace descent through the maternal bloodline. The traditional family system in Black Africa is based on economic social, and political factors, as well as on the community spirit of the members, which has resulted from the choices made to increase the prosperity and well-being of the people.

• Journal of Embryo Transfer
• /
• v.33 no.4
• /
• pp.195-203
• /
• 2018

Interferon-tau (IFNT) is known as a major conceptus protein that signals the process of maternal recognition of pregnancy in ruminants. Also, multiple interferon genes exist in cattle, However, molecular mechanisms of these bovine IFNT (bIFNT) genes whose expressions are limited have not been characterized. We and others have observed that expression levels of bovine subtype IFNT genes in the tissues of ruminants; thus, bIFNT1 and other new type I (bIFNTc1/c2/c3) gene co-exist during the early stages of conceptus development and non-trophoblast cells. Its genes transcription could be regulated through CDX2 and ETS2 and JUN and/or cAMP-response element binding protein (CREB)-binding protein (CREBBP) expression, a transcription factor implicated in the control of cell differentiation in the trophectoderm. Bovine ear-derived fibroblast cells, were co-transfected with luciferase reporter constructs carrying upstream (positions -1000 to +51) regions of bIFNT1 and other new type I gene and various transcription factor expression plasmids. Compared to each - 1kb-bIFNT1/c1/c2/c3-Luc increased when this constructs were co-transfected with CDX2, ETS2, JUN and/or CREBBP. Also, Its genes was had very effect on activity by CDX2, either alone or with the other transcription factors, markedly increased luciferase activity. However, the degree of transcriptional activation of the bIFNTc1 gene was not similar to that bIFNT1/c2/c3 gene by expression plasmid. Furthermore, Sequence analyses also revealed that the expression levels of bIFNT1/c2/c3 gene mRNAs expression were highest on day 17, 20 and 22 trophoblast and, Madin-Darby bovine kidney (MDBK), Bovine ear-derived fibroblast (EF), and endometrium (Endo) non-trophoblast cells. But, bIFNTc1 mRNA had not same expression level, bIFNTc1 lowest levels than those of IFNT1/c2/c3 gene in both trophoblast and non-trophoblast cells. These results demonstrate that bovine subtype bIFNT genes display differential, in the trophoblast and non-trophoblast cells.