• 한국생산제조학회지
• /
• 제4권3호
• /
• pp.48-57
• /
• 1995

The feasibility of generating controller surface topographies in single-point conventional turning operations is investigated. First, a mathematical model of the surface generation process was developed. Second, in order to control the texture of the machined surface, a micro-positioning stage and the associated command generation software were designed and built. Experimental examples have shown that surface texture can be precisely controlled and is in good agrement with the theoretical predictions.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1995년도 춘계학술대회 논문집
• /
• pp.24-33
• /
• 1995

The feasibility of generating controlled surface topographies in single-point conventional turning operations is investigated. First a mathematical model of the surface generation process was developed. Second in order to control the texture of the machined surface a micro-positioning stage and the associated command generation software were designed and built. Experimental examples have shown that surface texture can be precisely controlled and is in good agreement with the theoretical predictions.

• 제어로봇시스템학회논문지
• /
• 제9권12호
• /
• pp.1048-1054
• /
• 2003

In laser surface hardening processes, the geometrical parameters such as the depth and the width of a hardened layer can be utilized to assess the hardened layer quality. However, accurate monitoring of the geometrical parameters for on-line process control as well as for on-line quality evaluation is very difficult because the hardened layer is formed beneath a material surface and is not visible. Therefore, temperature monitoring of a point of specimen surface has most frequently been used as a process monitoring method. But, a hardened layer depends on the temperature distribution and the thermal history of a specimen during laser surface hardening processing. So, this paper describes the estimation results of the geometric parameters using multi-point surface temperature monitoring. A series of hardening experiments were performed to find the relationships between the geometric parameters and the measured temperature. Estimation results using a neural network show the enhanced effectiveness of multi-point surface temperature monitoring compared to one-point monitoring.

• 한국항공우주학회지
• /
• 제40권2호
• /
• pp.165-170
• /
• 2012

본 논문에서는 비행체 날개의 조종면에 작용하는 힌지 모멘트 분석을 위한 시험적 방법 및 결과를 수록하였다. 비행 공력 하중에 의하여 조종면에 힌지 모멘트가 작용할 경우, 조종면 구동장치에서 측정된 각도와 실제 조종면의 각도 사이에 탄성 변형에 의한 차이가 발생하며, 이 차이를 측정하여 힌지 모멘트로 환산할 수 있다. 이를 위하여 지상에서 조종면 구동장치 시스템의 비틀림 강성을 측정하기 위한 정하중 시험 및 조종면 각도 센서 교정시험을 수행하였다. 이 결과를 이용하여 비행 중 작용하는 힌지 모멘트를 계산할 수 있으며, 또한 체결부위의 미끄러짐 및 백래시 등의 기계적 오차도 예측할 수 있다. 실제 비행시험 결과를 이용하여 조종면에 작용한 힌지 모멘트를 계산한 결과와 수치 해석 결과의 비교를 통하여, 제시된 하중 측정 방법의 타당성을 입증하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권4호
• /
• pp.51-56
• /
• 2006

This paper proposes a control algorithm, which is verified experimentally, for aspherical surface grinding and polishing. The algorithm provides simultaneous control of the position and interpolation of an aspheric curve. The nonlinear formula for the tool position was derived from the aspheric equation and the shape of the tool. The function was partitioned at specific intervals and the control parameters were calculated at each control section. The position, acceleration, and velocity at each interval were updated during the process. A position error feedback was introduced using a rotary encoder. The feedback algorithm corrected the position error by increasing or decreasing the feed speed. In the experimental verification, a two-axis machine was controlled to track an aspherical surface using the proposed algorithm. The effects of the control and process parameters were monitored. The results demonstrated that the maximum tracking error with tuned parameters was at the submicron level for concave and convex surfaces.

• 항공우주기술
• /
• 제12권1호
• /
• pp.54-63
• /
• 2013

항공기의 자세제어를 담당하는 각각의 비행 조종면에 중복안정성 등의 이유로 여러 개의 작동기를 연결하여 사용하고 있다. 다중 작동기들이 동시에 정확하게 같은 위치로 이동하지 않으면 비행조종면에 변형이 발생한다. 그 결과 변형된 조종면이 원래 상태로 복원하려는 힘에 의해 작동기들 간에 force fighting이 발생한다. 게다가 force fighting은 각 장치들의 초기 허용 오차 등에 의해서도 발생한다. 다중 작동기간의 force fighting 현상은 제어정밀도에 영향을 미치고 피로파괴의 원인이 되어 작동기와 비행조종면의 수명을 단축할 수도 있다. 본 논문에서는 두 개의 서보작동기를 사용하는 시스템의 force fighting을 감소하기 위하여 힘되먹임제어를 사용하는 제어기를 설계하였다.

• 제어로봇시스템학회논문지
• /
• 제8권9호
• /
• pp.719-727
• /
• 2002

We proposed a decoupled adaptive fuzzy sliding-mode control scheme for a class of fourth-order nonlinear systems. The system is decoupled into two second-order systems such that each subsystem has a separate control target expressed in terms of sliding surface. For these sliding surfaces, we define main and sub target conditions. and, we made intermediate variables which are interconnected both surface conditions from the sub target sliding surface. Then, Two sets of fuzzy rule bases are utilized to represent the equivalent control input with unknown system functions of the main target sliding surface including intermediate variables. The membership functions of the THEN-part, which is used to construct a suitable equivalent control of sliding-mode control, are changed according to the adaptive law. With such a design scheme, we not only maintain the distribution of membership functions over state space but also reduce the computing time considerably. We apply the decoupled adaptive sliding-mode control to a nonlinear Cart-Pole system and confirms the validity of the proposed approach.

• 한국CDE학회논문집
• /
• 제1권2호
• /
• pp.158-162
• /
• 1996

Algorithms to find the Bezier control points of the image of a Bezier domain curve on a Bezier surface are described. The diagonal image curve is analysed and the general linear case is transformed to the diagonal case. This proposed algorithm gives the closed form solution to find the control points of the image curve of a linear domain curve. If the domain curve is not linear, the image curve can be obtained by solving the system of linear equations.

• 한국생산제조학회지
• /
• 제9권3호
• /
• pp.111-122
• /
• 2000

It is difficult to make shape library for featrue-based modeling because free-form surface is various shaped complicated To make modeling using similar shape feature-based model is easy and fast. Recently RE(Reverse Engineering) technolo-gy is very convenient method to get free-form surface. This study develops surface editor which makes surface modeling to manipulate control points and this study We study on the effective model data management using database system.

• 한국CDE학회논문집
• /
• 제10권3호
• /
• pp.162-167
• /
• 2005

A 3D solid element mesh generation algorithm was newly developed. 3D surface points of global rectangular coordinates were supplied by a 3D laser scanner. The algorithm is strait forward and simple but it generates hexahedral solid elements. Then, the surface rectangular elements were generated from the solid elements. The key of the algorithm is elimination of unnecessary elements and 3D boundary surface fitting using given 3D surface point data.