• 임산에너지
• /
• 제23권1호
• /
• pp.19-25
• /
• 2004

본 연구의 목적은 현재 산림쇠퇴 징후가 나타나고 있는 반월공단지역에 식재되어 있는 잣나무와 리기다소나무의 생장저하 실태와 광합성 특성을 밝히는데 있다. 이를 위해 안산시 전망대공원에 피해구를, 경기도 광주시에 소재하고 있는 경희대학교 연습림에 대조구를 선정하여 인공식재된 약 10년생의 잣나무와 리기다소나무 2수종을 비교하였다. 잣나무 및 리기다소나무 2수종 모두 피해구에서 생장량이 감소하였으며, 침엽의 잔존율도 저하하였다. 또한 2수종 모두 피해구에서 대조구에 비하여 순광합성속도가 저하하였고, 광-광합성곡선의 초기기울기인 양자수율도 저하하였다. 클로로필 a+b, b의 함량도 피해구에서 감소하였으며, 이 결과는 침엽의 연령이 증가함에 따라서 집광운반능력이 낮아져 침엽의 잔존율이 낮아지는 결과를 초래하였다고 생각된다. 이상의 결과로부터 최근 대기오염이 심한 반월공단지역에서 생육하고 있는 잣나무 및 리기다소나무의 생장감소 원인은 침엽의 클로로필 함량이 광화학계의 활성을 저하시켜 광합성 능력이 감소되어 최종적으로 생장감소를 초래한 것으로 판단된다.

• 한국환경과학회지
• /
• 제31권5호
• /
• pp.389-404
• /
• 2022

The purpose of this study is to evaluate the vegetation recovery status of Mudeungsan National Park Jungmeorijae, Jeungsimsa district restoration site, and the Shimwon Valley ecological landscape restoration site in Jirisan National Park. Compared to the control plots, the Jungmeorijae restoration site was analyzed to have height growth of about 73.5%, the average species diversity index of about 75.2%. and the average similarity index was recovered to 7.75%. In the case of the restoration site in Jeungsimsa district, the height growth compared to the control plots was about 69.2%, the average species diversity index was about 55.0%. and the average similarity index was recovered to 25.65%. In the case of the Shimwon Valley ecological landscape restoration area, the height growth compared to the control plots was about 32.6%, the average species diversity index about 176.7%. and the average similarity index was recovered to 0.85%. The restoration site of the Jeungsimsa district was planted with relatively large trees during restoration work, and it took a relatively long time(20 years). Also, the site had less limiting factors due to the low elevation, allowing the degree of vegetation recovery to be higher than that of other sites.

• 전기학회논문지P
• /
• 제62권1호
• /
• pp.36-44
• /
• 2013

This paper is written for the development and application of boiler fuel control algorithm and distributed control system of coal-fired power plant by the steps of design, coding, simulation test, site installation and site commissioning test. Fuel control algorithm has the upper algorithm and it is boiler master control algorithm that controls the fuel, feed water, air by generation output demand. Generation output demand by power load influences fuel control. Because fuel can not be supplied fast to the furnace of boiler, fuel control algorithm was designed adequately to control the steam temperature and to prevent the explosion of boiler. This control algorithms were coded to the control programs of distributed control systems which were developed domestically for the first time. Simulator for coal-fired power plant was used in the test step. After all of distributed control systems were connected to the simulator, the tests of the actual power plant were performed successfully. The reliability was obtained enough to be installed at the actual power plant and all of distributed control systems had been installed at power plant and all signals were connected mutually. Tests for reliability and safety of plant operation were completed successfully and power plant is being operated commercially. It is expected that the project result will contribute to the safe operation of domestic new and retrofit power plants, the self-reliance of coal-fired power plant control technique and overseas business for power plant.

• 한국환경생태학회지
• /
• 제31권1호
• /
• pp.62-71
• /
• 2017

본 연구에서는 식생 복원 유형별 토양동물의 변화를 알아보기 위해 비오톱이식공법, 산림표토포설, 소경목군락식재, 다층구조군락식재를 적용한 조사구와 이를 비교할 대조구를 선정하였다. 토양동물의 변화를 통한 토양동물자연도 분석 결과, 대조구는 환경에 민감한 동물군과 둔감한 동물군이 골고루 출현하고 있어 토양동물자연도가 높게 확인되었다. 식재를 통해 복원된 조사구의 경우, 비오톱이식공법의 토양동물자연도가 대조구와 유사한 수준까지 도달해 있었으며, 이보다 낮은 수준이긴 하나 소경목군락식재, 다층구조군락식재지역의 토양동물 또한 점진적으로 회복되고 있었다. 가장 낮은 토양동물자연도를 보인 조사구는 산림표토포설지역으로 확인되었다. 이를 통해 비오톱이식공법이 식재를 통해 복원된 조사구가 다른 조사구에 비해 토양동물의 회복이 좀 더 빨리 이루어지고 있음을 파악할 수 있었다. 이는 산림 내부의 숲을 그대로 굴취한 후 이식하는 것으로 표토와 심토의 일부분이 함께 옮겨지기 때문으로 판단된다.

• 한국산업융합학회 논문집
• /
• 제25권2_1호
• /
• pp.161-168
• /
• 2022

This study proposed a new approach to impliment a robusut control of comsumer-friendly flexible manipulator with five joint for untact working in filed work-site. The output redefinition approach was used to overcome the non minimum phase characteristic of the system. The new output is defined so that the zero dynamics related to this output are stable. The control strategy is based on an computed torque method which is applicable to a class of time-invariamt phase linear systems whose uncertainties appear in output loop stable. The controller is composed of a stabilizing joint controller and an output redefinition tracking controller. Experimental results are also presented to verify the effectiveness of the proposed control scheme.

• 한국조경학회지
• /
• 제15권2호
• /
• pp.79-90
• /
• 1987

This second consecutive research was connected to 7he previous first research with same title. The purpose of this research is to estimate the carrying capacity for the Seonjeong royal tomb and to propose its management planning. User's characteristics and relationship between user's density and vegetational environment were analized for the above objective. The result of this research shall be summarized as follows. 1. The site was damaged seriously by pupils and social groups'picnic activities concentrated in special periods of Friday and weekend during April and May. 2. Social-psychological carrying capacity estimation would be impossible due to lack of relationship between user's density and satisfaction. 3. Maximum user's density limits as a ecological carrying capacity was 1.4 persons per 100 square meters and modified optimum ecological carrying capacity was estimated as 1.0persons per 100 square meters. Maximum visitors as a optimum carrying capacity of the Seonjeong royal tomb area was estimated as 6,000 persons when supposing the proposed landuse planning. 4. To restore and preserve the tomb landscape as a traditional historic site, Seonjeong royal tomb shall be managed by three landuse areas ; protection and control area, natural picnic area and shaded picnic area. And the protection and control area include three sites ; natural reclamation site, natural preservation site and tomb landscape conservation site.

• 경영과학
• /
• 제26권2호
• /
• pp.71-89
• /
• 2009

The purpose of this research is to identify the factors affecting user acceptance of e-learning site. To more precisely explain an individual's behavior of accepting e-learning site, Perceived Interactivity is divided into four components; User Control, Responsiveness, Personalization and Connectedness. This research investigates the causal relationship among four components and basic factors of TAM. This research uses structural equation modeling (SEM) to confirm the validity and analyzes the causal relationship of the suggested model. The results indicates strong support for the validity of proposed model with 54.8% of the variance in behavioral intention to e-learning site. The result finds that all the basic casuality of TAM are significant and most components of Perceived Interactivity are significant. However the path Connectedness to Perceived Ease of Use and User Control to Perceived Playfulness is not significant. Among components of Perceived Interactivity, Personalization is the strongest antecedent of TAM. Perceived Usefulness is the strongest antecedent of behavioral intention of e-learning site.

• Journal of Microbiology
• /
• 제33권3호
• /
• pp.191-195
• /
• 1995

IciA protein has been shown as an inhibitor for the initiation of E. coli chromosomal DNA replication at oriC. IciA protein binds the AT-rich region in oriC and then blocks the initiation of chromosomal DNA replication. Two binding sites for IciA protein were identified in dnaA gene, encoding the initiator for the E. coli chromosomal replication, promoter region by gel-shift assay and DNase I footprinting, One, named as IciA site I, is located upstream of the dnaA promoter 1P. The other, named as IciA site II, is located downstream of the dnaA promoter 2P. The sequence comparison of the regions protected from the DNase I cleavage did not result in a clear consensus sequence for the binding of IciA protein, suggesting that IciA protein may be a member of multimeric complex dsDNA binding proteins. This study provided information about the binding mode of IciA protein. Even though the IciA site II and IciA binding site in oriC seem to be composed of two IciA binding units, one binding unit is likely enough to cause the binding of IciA protein to the IciA site I. The binding of IciA protein to the dna4 promoter implies that IciA protein may involve not only the control of the initiation of chromosomal DNA replication but also the control of the dna4 gene expression.

• Advances in Computational Design
• /
• 제7권4호
• /
• pp.345-369
• /
• 2022

Infectious disease emergency hospitals are usually temporarily built during the pneumonia epidemic with higher requirements regarding diagnosis and treatment efficiency, hygiene and safety, and infection control.This study aims to identify how the Building Information Modeling (BIM) + Industrialized Building System (IBS) approach could rapidly deliver an infectious disease hospital and develop site epidemic spreading algorithms. Coronavirus-19 pneumonia construction site spreading algorithm model mind map and block diagram of the construction site epidemic spreading algorithm model were developed. BIM+IBS approach could maximize the repetition of reinforced components and reduce the number of particular components. Huoshenshan Hospital adopted IBS and BIM in the construction, which reduced the workload of on-site operations and avoided later rectification. BIM+IBS integrated information on building materials, building planning, building participants, and construction machinery, and realized construction visualization control and parametric design. The delivery of Huoshenshan Hospital was during the most critical period of the Coronavirus-19 pneumonia epidemic. The development of a construction site epidemic spreading algorithm provided theoretical and numerical support for prevention. The agent-based analysis on hospital evacuation observed "arched" congestion formed at the evacuation exit, indicating behavioral blindness caused by fear in emergencies.

• 전기학회논문지P
• /
• 제62권3호
• /
• pp.117-126
• /
• 2013

This paper is written for the development and application of boiler furnace pressure control algorithm and distributed control system of coal-fired power plant by the steps of design, coding, simulation test, site installation and site commissioning test. The control algorithms were designed in the shape of cascade control for two parts of furnace pressure control and induced draft fan pitch blade by standard function blocks. This control algorithms were coded to the control programs of distributed control systems. The simulator for coal-fired power plant was used in the test step and automatic control, sequence control and emergency stop tests were performed successfully like the tests of the actual power plant. The reliability was obtained enough to be installed at the actual power plant and all of distributed control systems had been installed at power plant and all signals were connected mutually. Tests for reliability and safety of plant operation were completed successfully and power plant is being operated commercially. It is expected that the project result will contribute to the safe operation of domestic new and retrofit power plants, the self-reliance of coal-fired power plant control technique and overseas business for power plant.