• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.958-961
• /
• 2004

This paper presents a plant control panel model for the analysis. Seismic qualification analysis for the plant control panel is carried out to confirm the structural integrity under the seismic conditions represented by required response spectra(RRS). For the analysis finite element method(FEM) is used. And mode combinations are adopted to obtain the reliability of the spectrum analysis. The analysis results shows that the plant control panel system is designed as a dynamically rigid assembly, without any resonance frequency below 33Hz. The calculated stress of the plant control panel system is much less than yield stress of used steel.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.103-111
• /
• 1994

An interactive and iterative design method based on the constraint satisfaction problem (CSP) technique was developed to generate an ergonomically sound layout of a control panel. This control panel layout method attempts to incorporate a variety of relevant ergonomic principles and design constraints, and generate an optimal or, at least, a "satisfactory" solution through iterative interactions with the designer. The existing panel design and layout methods are mostly based on the optimization of single objective function formulated to reflect and trade off all ergonomic design objectives which are largely different in their nature. In fact, the problem of seeking an ergonomically sound panel design should be viewed as a multiple objective optimization problem. Furthermore, most of the design objectives should be understood as constraints rather than objectives to be optimized. Hence, a constraint satisfaction approach is proposed in this study as a framework for the panel designer to search through the design decision space effectively and make various design decisions iteratively. In order to apply the constraint satisfaction approach to the panel design procedure, the ergonomic principles such as frequency-of-use, importance, functional grouping, and sequence-of-use are formalized as CSP terms. With this formalization, a prototype system was implemented and applied to panel layout problems. The results clearly showed the effectiveness of the proposed approach since it permits designers to consider and iteratively evaluate various design constraints and ergonomic principles, and, therefore, aids the panel designer to come up with an ergonomically sound control panel layout.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.6
• /
• pp.71-79
• /
• 2008

In the manufacture of flat panel display devices, there is a strong demand for contactless glass panel handling devices that can manipulate a glass panel without contaminating or damaging it. To fulfill this requirement, an electrostatic suspension device far glass panels where the glass panel is supported by electrostatic forces without any mechanical contact is proposed. To implement the system with low cost and compactness, switched-voltage control scheme that is based on the relay feedback control is utilized. Relay feedback control method deploys only a single high-voltage power supply that can deliver a DC voltage of positive and/or negative polarity and thus high voltage amplifiers that are costly and bulky are not needed any more. It is shown that despite the inherent limit cycle property of the relay feedback based control, an excellent performance in vibration suppression is attained due to the presence of a relatively large squeeze film damping originating from the electrodes and levitated object. Using this scheme, a $100{\times}100mm^2$ glass panel was levitated stably with airgap variation decreasing down to $1\;{\mu}m$ at an airgap of $100\;{\mu}m$.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1182-1188
• /
• 2011

By storing various train information in running high speed train, we can analyze the cause of train accident efficiently. we have developed the smart and high available control method to control and manage the hardware modules. The hardware modules for event recorder consist CPU, Digital Input and Output, Pulse Input, Communication, Control Panel and Crash Protected Memory. The real time operation system is used to totally control and manage the various hardware modules. The main function of control method is collection of train information, calculation of train speed, interface with other on-board control system, storing and retrieving train information, and communication with Control Panel. In Control Panel, it displays the current train speed and the status of event recorder effectively. Also user interface is provided in Control Panel.

• Journal of KSNVE
• /
• v.9 no.1
• /
• pp.33-41
• /
• 1999

This paper presents a method of actively controlling the interior noise by a trim panel with hybrid feedforward-feedback control loop. The control technique is designed to minimize the vibration of panel whose motion is limited to that of a piston (out-of-plane motion). The hybrid controller consists of an adaptive feedforward controller in conjunction with a linear quadratic Gaussian (LQG) feedback controller. In order to maintain control performance of both persistent and transient disturbances, the feedback loop speeds up the adaptation rate of feedforward controller by improving damping capacity of secondary plant related with the adaptation rule. Numerical simulation and experimental result indicate that the hybrid controller is a more effective method for reducing the vibration of the panel (and therefore the interior noise) compared to using feedforward controller.

• Proceedings of the ESK Conference
• /
• 1995.10a
• /
• pp.172-181
• /
• 1995

A control panel layout system was developed to generate an ergrnomically sound panel design. A constraint satisfaction concept was introduced as a framework of incorporating diverse ergonomic design guidelines into the panel layout. An efficient search algorithm which can find a constraint satisfaction solution within a reasonable time was developed based on preprocess and look ahead procedures with the backjumping technique. The proto- type panel layaout system was developed on a SPARC workstation. The constraint satisfaction algorithm was programmed in C language with Motif as a GUI tool under the X-windows environment. The effectiveness of the prototype paned layout system was examined by a case study.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2701-2706
• /
• 2003

This paper describes weld seam tracking and error compensation methods of automatic plasma arc welding system designed for the corrugation panel that consists of a linear section and a curved section with various curvatures. Realizing automatic welding system, we are faced with two problems. One is a precise seam tracking and the other is an arc length control. Due to the complexity of the panel shape, it is difficult to find a seam and operate a torch manually in the welding process. So, laser vision sensor for seam tracking is equipped for sensing the seam position and controlling the height of a torch automatically. To attain more precise measurement of an arc length, we measure the 3D shape of the panel and analyze error factors according to the various panel states and caused errors are predicted through the welding process. Using that result, compensation algorithm is added to that of arc length control and real time error compensation is achieved. The result shows that these two methods work effectively.

• Fire Science and Engineering
• /
• v.24 no.1
• /
• pp.24-30
• /
• 2010

An integrated type fire alarm control panel which is for the purpose of the ubiquitous environment application is reported. For the ubiquitous environments, mainly three additional functions upon its inherent capabilities are implemented. That is, wireless technology with ZigBee capability is applied for the interface of ZigBee detectors. Camera images can be displayed in the fire alarm control panel in which images are transferred via ethernet. For the time synchronization of the distributed fire alarm control panel, GPS module is introduced and implemented in the system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.4
• /
• pp.369-375
• /
• 2008

The kinematics and control problem of a visual alignment system is investigated, which plays a crucial role in the fabrication process of flat panel displays. The first solution is the inverse kinematics of a 4PPR parallel alignment mechanism. It determines the driving distance of each joint to compensate the misalignment between mask and panel. Second, an efficient vision algorithm for fast alignment mark recognition is suggested, where by extracting essential feature points to represent the geometry of a mark, the geometric template matching enables much faster object recognition comparing with the general template matching. Finally, the overall visual alignment process including the kinematic solution, vision algorithm, and joint control is implemented and experimental results are given.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.184-185
• /
• 2017

In this study, the performance of low-priced ceramic panels developed to improve the poor interior residential environment of the underprivileged was evaluated by comparing them with the performance of I Company (Japan)'s Eco karat, a representative humidity control panel. Experimental results showed that the humidity control performance of the Ceramic panel was 53.33g/㎡, which was about 54% less effective than 98.88g/m2 of the Ecokarat. As a result, it is believed that the need to improve the quality of the Ceramic panels.