• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.246-251
• /
• 1990

A fuzzy control scheme has been proposed for a supercritical extraction process which has attracted much attention recently as a new separation technology. Based on the manual operation experience, three control pairs between manipulated and output variables are selected first and then seven membership functions are defined for control error and time rate of the error, respectively for each control pair, resulting in forty nine Fuzzy control rules. In addition to these, the membership functions are defined in two steps (coarse and fine) to enhance control performance. Fuzzy inference is performed using MAX-MTN composition rule and defuzzified control output is calculated based on center of gravity method. The prosed Fuzzy control scheme has been assessed through numerical simulation. As a result, the proposed scheme shows good control performance comparable with that by INA(inverse nyquist array) which usually requires complicated design procedure.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권11호
• /
• pp.2254-2271
• /
• 2011

Access control in dynamic environments needs the ability to provide more access opportunities of information to users, while also ensuring protection information from malicious users. Trust and risk are essential factors and can be combined together in access control decision-making to meet the above requirement. In this paper, we propose the combination of the trust and risk in access control to balance information accessibility and protection. Access control decision is made on the basis of trustworthiness of users and risk value of permissions. We use potential relations between users and relations between permissions in access control. Our approach not only provides more access opportunities for trustworthy users in accessing permissions, but also enforces traditional access control constraints such as Chinese Wall policy and Separation of Duty (SoD) of Role-Based Access Control (RBAC) model in an effective way.

• 한국항공우주학회지
• /
• 제37권12호
• /
• pp.1173-1183
• /
• 2009

스마트 무인기 익형 주위의 유동 구조를 파악하고 이를 바탕으로 synthetic jet을 이용하여 정지 비행 모드에서의 수익하중 감소 여부를 파악하였다. 스마트 무인기의 실제 비행 모드에 대하여 유동 구조를 분석하여 앞전 및 뒷전에서 발생하는 와류에 의해서 수익 하중이 크게 증가함을 밝혔다. 이에 앞전과 뒷전에서 발생하는 유동의 박리를 제어하기 위하여 0.01c, $0.3c_{flap}$, $0.95c_{flap}$ 위치에 jet을 위치시켰다. 또한 무차원 주파수(F+)의 변화에 따른 유동 구조 변화와 항력 감소율을 알아보았다. 그 결과, 와류의 유동 구조를 변화시켜 앞전과 뒷전에서 발생하는 거대한 와류의 박리 주기를 짧게 하고 와류의 크기를 감소시켜 정지 비행 모드에서 수익 하중을 효과적으로 감소시킬 수 있었다.

• 구강회복응용과학지
• /
• 제28권1호
• /
• pp.57-66
• /
• 2012

본 연구는 ProTaper Universal에 의도적으로 부여한 내부 응력이 피로 파절에 미치는 영향을 평가하였다. 25 mm 길이의 S1, S2, F1, F2, F3, F4 그리고 F5 파일을 내부 응력을 부여하기 위해서 Endo-Training-Bloc (Dentsply Maillefer)에 auto-stop 될 때까지 속도 300 rpm, 토크 1.0 Ncm의 값으로 밀어 넣었다. 부여한 내부 응력의 횟수에 따라 각각 Stress 0 군(대조군), Stress 1 군, Stress 2 군 그리고 Stress 3 군으로 분류하였다. 경사진 유리판을 사용하였고 파일 파절 시간을 측정하였다. 모든 파일에서는 Stress 3 군은 대조군에 비해 Ni-Ti 파일의 파절 시간이 감소하였고 F2와 F3에서 모든 실험군은 대조군에 비해 파절 시간이 감소하였다. F4와 F5에서 Stress 2 군과 Stress 3 군이 대조군에 비해 파절 시간이 감소하였다. ProTaper Universal의 피로 파절은 파일에 축적된 내부 응력에 의해 영향을 받는다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.386-391
• /
• 2003

This paper focuses on robust $H_{\infty}$ control for bilinear systems with time-varying parameter uncertainties and exogenous disturbance via output feedback. $H_{\infty}$ control is achieved via separation into a $H_{\infty}$ state feedback control problem and a $H_{\infty}$ state estimation problem. The suitable robust stabilizing output feedback control law can be constructed in term of approximated solution to x-dependent Riccati equation using successive approximation technique. Also, the $H_{\infty}$ filter gain can be constructed in term of solution to algebraic Riccati equation. The output feedback control robustly stabilizes the plant and guarantees a robust $H_{\infty}$ performance for the closed-loop systems in the face of parameter uncertainties and exogenous disturbance.

• 한국유체기계학회 논문집
• /
• 제14권2호
• /
• pp.25-28
• /
• 2011

The control rod assemblies do freely fall into the reactor core by the gravity from the control rod drive mechanism. In order to achieve a rapid shutdown and control the reactor power, it is required to insert control rod assemblies as soon as possible. In this paper, we evaluated the drop time and flow characteristics caused around guide tube for SMART(System-integrated modular advanced reactor) control rod assembly. Numerical analyses are carried out with FLUENT program of computational fluid dynamics. This study results show that the drop time of the control rod assembly in the operating condition of SMART is more 20 percent rapidly than the drop time of the room temperature and ambient atmosphere condition.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1996년도 춘계 총회 및 학술발표회
• /
• pp.55-56
• /
• 1996

Heterophase polymer system has been attractive for a potential applicability to gas separation membrane material. It has been known that there is a trade-off between gas permeability and its selectivity in common polymers. Therefore, the heterophase polymer can be an alternative for a gas separation membrane material because its transport properties can be readily controlled by blending of two different polymers. The transport properties of immiscible polymer blends strongly depend upon the intrinsic transport properties of corresponding polymers. Another important factor to determine the transport properties is their morphology: volume fraction, size and shape of dispersed phase. Although the effect of the volume fraction of the dispersed phase on the transport properties has been widely investigated, the size and shape effects have been paid attention very much. In an immiscible polymer blend of two polymers, its morphology is primarily controlled by its volume fraction of dispersed phase. Therefore, the effect of the size of the dispersed phase can be hardly seen. Therefore, a block copolymer has been commonly employed to control their morphology when each block is miscible with one or the other phase. In this work, gas transport properties will be measured by varying the morphology of the heterophase polymer membrane. The transport properties will be interpreted in terms of their morphology. The effect of the volume fraction of the PI phase and, in particular, its size effect will be investigated experimentally and theoretically.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2002년도 제15회 심포지움
• /
• pp.23-46
• /
• 2002

The cryogenic, pressure swing adsorption and membrane methods have been used to separate air into nitrogen and oxygen. The air separation membrane is made of the polymers, of which manufacturing process is complicate and it causes a little high production cost. Polymer membrane has temperature limit in usage and low durability even at moderate temperature. Therefore, inorganic membranes have been studied for years. As formation of unit alumino-silicate membrane, unit cells of membrane were made with a few coating methods. In this study the dipping of substrate into sols, application of vacuum to the opposite side of substrate with coating and rotating of the substrate in the sols were found as good coating memthods to make a uniform coating and to control the thickness of membrane. The membrane coats were examined by SEM and XRD. The sample ESZl-1 was compared with those of samples that prepared by another method. The present developed coating methods could be applied to the various types of zeolite membrane formation, that is A- X-, Y- ZSM- and MCM-types of membranes. Also these membrane forming methods could be applied to formation of catalyst absorbed zeolite membrane, of which zeolite absorb the catalytic metals. The product obtained from these coating methods could be applied to the industrial gas and liquid phase catalytic reaction and separation processes.

• 보건행정학회지
• /
• 제12권3호
• /
• pp.23-35
• /
• 2002

Fiscal crisis in the medical insurance system has put the pressure upon hospitals by increasing the rate of curtailment, since the implementation of the separation of prescription and dispensing of medicine. The purpose of this study is to analyse the curtailment of mdical and drug expenditure before and after the system of separation between prescribing and dispensing and to suggest the problems about current inspection system. Data were obtained from 13 general hospitals and used for analysis of trends on medical & drug expenditure, and curtailment in 1999-2000 at three months intervals. The results were as follows; The scale of curtailment for drug expenditure has been increased on outpatient and inpatient since 2000. For the curtailed drug cost with outpatient, the ratio of curtailed drug expenditure has been increased in the case of prescription within the hospital. These results suggest that review system in social insurance were over-focused to control the cost and it might to impede the validity of review function in insurance system. Therefore, it' s needed to develope the scientific and reasonable criteria for Inspection and evaluation of durg expenditure.

• 한국가시화정보학회지
• /
• 제19권1호
• /
• pp.50-56
• /
• 2021

With the advances in recent nanotechnology, mass transport phenomena have been receiving large attention both in academic researches and industrial applications. Nonetheless, it is not clearly determined which parameters are dominant at nanoscale mass transport. Especially, membrane is a kind of technology that use a selective separation to secure fresh water. The development of great separation membrane and membrane-based separation system is an important way to solve existing water resource problems. In this study, glass fiber-based membranes which are treated by graphene oxide (GO), poly-styrene sulfonate (GOP) and sodium dodecyl sulfate (GPS) were fabricated. Mass transport parameters were investigated in terms of material-specific and structure-specific dominance. The 3D structural information of GO, GOP, and GPS was obtained by using synchrotron X-ray nano tomography. In addition, electrostatic characteristic and water absorption rate of the membranes were investigated. As a result, we calculated internal structural information using Tomadakis-Sotrichos model, and we found that manipulation of surface characteristics can improve spacer arm effect, which means enhancement of water permeability by control length of ligand and surface charge functionality of the membrane.