• 한국항공우주학회지
• /
• 제44권12호
• /
• pp.1035-1042
• /
• 2016

상용 비행시뮬레이션 게임 엔진 X-Plane을 이용하여 구성한 비행시뮬레이터에 대해 FTD level 5를 만족시킬 수 있는 QTG작성에 대해 연구하였다. 모델은 Cirrus사(社)의 SR-20을 대상으로 하였다. QTG의 테스트항목 중에는 조종반력을 측정하는 항목도 있다. 따라서 Brunner사(社)의 CLS(Control Loading System)을 조종 장치에 설치하여 조종반력을 측정할 수 있도록 구성하였다. X-Plane은 자체적으로 트림루틴을 제공하지 않으므로 외부에서 Autopilot을 구성하여 항공기가 트림상태에 도달할 수 있도록 하였다. 또한 테스트를 자동으로 수행할 수 있는 알고리듬을 개발하여 수동으로 조종하여 테스트하는 번거로움을 피하고 같은 테스트를 같은 조건으로 진행할 수 있도록 하였다. FTD Level 5의 경우 실제 비행데이터가 아닌 alternative data source를 적용할 수 있으며 이를 활용하여 모든 테스트 결과가 주어진 범위를 만족하였다.

• 한국의류학회지
• /
• 제7권2호
• /
• pp.45-52
• /
• 1983

The purpose of this study was to investigate between locus of control, body cathexis and four aspects of clothing behavior. Locus of control was measured by Rotter's The Internal-External Scale and body cathexis by Secord and Jourard's Body Cathexis Scale. Two aspects of clothing behavior were assessed with Lee's questionnaires dealing with status symbol and clothing satisfaction. Clothing Acceptance I was determined with questionnaires designed to measure the acceptance of color and casual wear and Clothing Acceptance II by line drawings of clothing representing formal type, informal type, and new mode type designed to measure the acceptance of business suits. The questionnaires in this study were administered to a sample of men (between 20 to more than 60 years of age) in Seoul. The data from 303 respondents were analyzed. The results were: 1) Locus of control was not related to Clothing Acceptance I(acceptance of color and casual wear), but positively related to Clothing Acceptance II(acceptance of business suit), that is, the persons having wider latitudes of acceptance in business suits were internally controlled in locus of control. 2) Locus of control was negatively related to status symbol, that is, the persons having higher concepts in status symbol were externally controlled in locus of control. 3) Body cathexis was positively related to clothing satisfaction, that is, the persons having higher satisfaction toward their clothing were more satisfied with their body.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.915-920
• /
• 2007

A new optimal state feedback and disturbance feedforward control design in the sense of minimizing $L_{2}-gain$ from disturbance to control output is proposed for disturbance attenuation of systems with bounded control input and measurable disturbance. The controller is derived in the framework of linear matrix inequality(LMI) optimization. A gain scheduled state feedback and disturbance feedforward control design is also suggested to improve disturbance attenuation performance. The control gains are scheduled according to the proximity to the origin of the state of the plant and the magnitude of disturbance. This procedure yields a stable linear time varying control structure that allows higher gain and hence higher performance controller as the state and the disturbance move closer to the origin. The main results give sufficient conditions for the satisfaction of a parameter-dependent performance measure, without violating the bounded control input condition.

• 한국정밀공학회지
• /
• 제24권11호
• /
• pp.59-65
• /
• 2007

A new optimal state feedback and disturbance feedforward control design in the sense of minimizing $L_2$-gain from disturbance to control output is proposed for disturbance attenuation of systems with bounded control input and measurable disturbance. The controller is derived in the framework of linear matrix inequality(LMI) optimization. A gain scheduled state feedback and disturbance feedforward control design is also suggested to improve disturbance attenuation performance. The control gains are scheduled according to the proximity to the origin of the state of the plant and the magnitude of disturbance. This procedure yields a stable linear time varying control structure that allows higher gain and hence higher performance controller as the state and the disturbance move closer to the origin. The main results give sufficient conditions for the satisfaction of a parameter-dependent performance measure, without violating the bounded control input condition.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.979-982
• /
• 2003

In this study, because of change in electromagnetic force, deformation of the free surface motion of a magnetic fluid is changed. Deformation of the free surface motion of a magnetic fluid for the change in electromagnetic force is discussed and carried out theoretically and experimentally on the basis of Rosensweig Ferrohydrodynamic Bernoulli Equation. Objective of this study explicates free surface motion by electromagnetic force and planes to designed controller. To control free surface of magnetic fluid, it embody designed two-dimensional free surface form of magnetic fluid. By using this characteristics, they applied to oscillator for surface control, flow control, boundary layer control. Strength of magnetic field and height of free surface of magnetic fluid measure as a hall-effect sensor. As performing height control of magnetic fluid, the result will be presented possibility of free surface deformation control.

• 제어로봇시스템학회논문지
• /
• 제9권12호
• /
• pp.969-976
• /
• 2003

A remote control strategy for vehicles in Intelligent Vehicle Highway System (IVHS) is considered. An optimal scheduling of a limited communication channel is proposed for lead vehicle control in a platoon. The optimal scheduling problem is to find the optimal communication sequence that minimizes the cost obtained inherently by an optimal control without the communication constraint. In this paper, the PID control law which guarantees the string stability is used for the lead vehicle control. The fact that the PID control law is equivalent to the approximately linear quadratic tracker allows to obtain the performance measure to find an optimal sequence. Simulations are conducted with five maneuvering platoons to evaluate the optimality of the obtained sequence.

• Journal of applied mathematics & informatics
• /
• 제17권1_2_3호
• /
• pp.315-328
• /
• 2005

In this paper we present a new method for designing a nozzle. In fact the problem is to find the optimal domain for the solution of a linear or nonlinear boundary value PDE, where the boundary condition is defined over an unspecified domain. By an embedding process, the problem is first transformed to a new shape-measure problem, and then this new problem is replaced by another in which we seek to minimize a linear form over a subset of linear equalities. This minimization is global, and the theory allows us to develop a computational method to find the solution by a finite-dimensional linear programming problem.

• 한국정밀공학회지
• /
• 제24권3호
• /
• pp.47-54
• /
• 2007

This paper describes the development of the intelligent gripper with two 3-axis force sensor that can measure forces Fx, Fy, Fz simultaneously, for stably grasping an unknown object. In order to grasp an unknown object using an intelligent gripper softly, it should measure the force in the gripping direction and the force in the gravity direction, and perform the force control using the measured farces. Thus, the intelligent gripper should be composed of 3-axis force sensor that can measure forces Fx, Fy, Fz at the same time. In this paper, the intelligent gripper with two 3-axis force sensor was manufactured and its characteristic test was carried out. The fabricated gripper could grasp an unknown object stably. Also, the sensing element of 3-axis force sensor was modeled and designed with five parallel-plate beams, and 3-axis force sensor for the intelligent gripper was fabricated. The characteristic test of the made sensor was carried out.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.834-839
• /
• 2004

In this paper, we investigate the optimal base position and joint configuration of a planar wheeled mobile manipulator in terms of manipulability measure. Taking into account the level of coordination between a manipulator and a platform, both local and global optimization problems are considered. First, based on the kinematic models of a mobile manipulator, the manipulability measures are expressed along with the analysis of the configurational dependency. Second, the geometric symmetry of a mobile manipulator in view of manipulability measure is analyzed, and for some base positions, the best and worst joint configurations are determined, Third, with reverence to the maximum, minimum, and average manipulability measures, the optimal base positions are determined, and the percent improvements due to the base relocation are discussed considering the relative scales among the platform size, the wheel radius, and the link length.

• 센서학회지
• /
• 제6권3호
• /
• pp.228-236
• /
• 1997

방사성 물질은 인체에 매우 위험하여 정확한 제어와 유출 방지 및 정확한 측정의 필요성이 요구된다. 본 논문에서는 GM 계수기를 사용하여 방사성 물질의 양을 정확히 측정할 수 있는 시스템을 설계하였으며, 계수 프로그램과 측정한 데이터를 저장하거나 외부 장치로 전송향 수 있는 운용 프로그램을 개발하였다. 제작한 시스템과 계수 프로그램은 국내외에서 개발하고 있는 GM 계수관형 방사선 측정기로 원자력 발전소 및 연구소에서 띠러 가지 방식으로 활용될 수 있도록 설계되었다.