• 전기학회논문지
• /
• 제66권2호
• /
• pp.339-346
• /
• 2017

This paper proposes a sensorless control method to improve the performance of an internal permanent magnet synchronous motor (IPMSM) control by using a full-order flux observer in a wide speed range. The conventional sensorless control method uses a constant gain for high performance at low-speed region. However, this method has drawbacks such as an increased angle error and current ripple in the high-speed region due to the fixed gain value. In order to overcome this problem, the gain of the full-order flux observer is changed by considering the angle error in the whole speed range. The proposed method minimizes the angle error for each region of the speed range by applying a relevant gain value, which improves the current ripple reduction and motor noise cancellation. The validity of proposed sensorless control method is verified by a simulation and an experiment.

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.54-62
• /
• 1994

This paper presents active control methodologies to suppress structural deflections of a composite beam using a distributed piezoelectric-film actuator and sensor. Three types of different controllers are employed to achieve vibration suppression. The controllers are established depending upon the information on the velocity components of the structrue and on the deflection magnitudes as well. They are constant-amplitude controller(CAC), constant-gain mcontroller(CGC), and constant-amplitude-gain controller(CAGC). For the minimization of the residual vibration (chattering in a settled phase), which is the practical shortcoming of the conventional CAC dur to time delay phenomenon of the hardware system, a new control algoritym CAGCis designed by selecting switching constants in an optimal manner with respect to the initial tip deflection and the applied voltage. The experimental investigations of the transient and forced vibration control for the first vibrational mode are undertaken in order to compare the suppression efficiency of each control algorithm. Moreover, simultaneous controllability of various vibrational modes through the proposed scheme is also experimentally verified by pressenting both the transfer function and the phase.

• 융합신호처리학회논문지
• /
• 제5권2호
• /
• pp.138-142
• /
• 2004

본 논문은 모델추종 제어을 위한 PID제어기법을 제안한다. 이산시간영역에서 제어성능을 개선하기 위해 제안하였고, PID 제어계에 새로운 전치 보상기를 삽입하여 모델추종제어계가 되도록 하였다. 외란이나 부하변동에 의해서 계의 응답이 변할 때 PID 제어기의 이득을 재조정할 필요가 있다. PID 제어계에서 각 PID 이득이 제어계의 성능을 크게 좌우하게 되므로 신경망을 PID제어기에 결합하여 제어계의 성능을 향상시켰고 제안한 제어계에서 PID제어기의 이득은 역전파 알고리즘에 의해 자동적으로 조정되어지도록 하였다. 모델추종 제어계의 제어성능을 확인하기 위하여 제어대상을 직류 서보 전동기의 각 위치로 하였다. 이것을 위치 제어계에 적용하여 실험을 통해 그 성능을 증명하였다.

• 대한전자공학회논문지TC
• /
• 제39권12호
• /
• pp.529-538
• /
• 2002

이동통신 시스템에서 핸드오프호 차단확률을 줄이기 위한 전형적인 방법은 핸드오프호를 위하여 미리 정한 채널수만큼의 채널을 예약하는 것이다. 예약 채널수를 결정하는 문제는 최적화 문제로 계산의 복잡도를 가중시킨다. 본 논문에서는 미리 채널을 예약하지 않고 핸드오프호 차단확률을 줄일 수 있는 호 수락 제어기법을 제안한다. 제안한 호 수락 제어 기법은 신규호 도착에 따른 시스템 상태에 종속하는 gain을 새로운 성능지표로 정의하고, 신규호 도착 시 계산되는 gain 값에 의한 호 수락 결정을 수행한다. SRN은 추계적 페트리 네트의 확장형으로 모델에 적절한 reward를 부여함으로써 원하는 성능지표를 쉽게 계산할 수 있는 모델링 도구이다. 본 논문에서는 gain 계산에 의한 호 수락 제어를 수행할 수 있는 SRN 모델을 개발하고 성능분석을 수행한다. SRN 모델은 2 레벨의 계층 모델로 상위 계층은 멀티미디어 트래픽에서 QoS를 고려한 호 수락 제어와 채널 할당을 나타내는 상태 구조 모델이고 하위 계층은 주어지는 상위계층의 시스템 상태에 따른 gain 값 계산을 수행하는 모델이다.

• 제어로봇시스템학회논문지
• /
• 제10권2호
• /
• pp.125-130
• /
• 2004

This paper describes an approach for synthesizing a Fuzzy Logic Controller(FLC) that combines the benefits of fuzzy logic control and fuzzy logic gain scheduling for the F/A-18 aircraft. Specially, fuzzy rules are utilized on-line to determine the denoralization factor(Κ) of a feedback fuzzy controller based on the dynamic pressure(Q) indicateing the region of the flight envelop the aircraft is operating in. Simulation results demonstrate that the proposed FLC provides excellent compensation for time-varying and/or nonlinear characteristics of the aircraft, and that it also exhibits satisfactory robustness with noisy air data sensors.

• 제어로봇시스템학회논문지
• /
• 제19권8호
• /
• pp.731-737
• /
• 2013

In this paper, we propose an image-based output feedback robust controller of robot manipulators which have bounded parametric uncertainty. The proposed controller contains an integral action and high-gain observer in order to improve steady state error of joint position and performance deterioration due to measurement errors of joint velocity. The stability of the closed-loop system is proved by Lyapunov approach. The performance of the proposed method is demonstrated by simulations on a 5-link robot manipulators with two degrees of freedom.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.111-114
• /
• 2003

In this paper, we consider the stabilization and $H_\infty$ control of linear systems with static output feedback control. The static output feedback control represents the simplest closed-loop control that can be realized in practice, and, moreover, it is less expensive to be implemented and is more reliable. In spite of its advantages, it is one of the open problems which is not sloved analytically or numerically yet. After decompose the closed-loop system into feedback form, by adopting the small gain theorem, we obtain a sufficient condition for stabilization and a sufficient condition for It control expressed as linear matrix inequalites. Finally, we show the usefulness of our results by a numerical example.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.94-100
• /
• 1998

Microstep characteristics largely depends on the variation of friction force induced by the geometric accuracy of ballscrew, guide rail and the control characteristics of servo unit. In this paper, for improving the microstep characteristics of hydrostatic table with ballscrew, microstep resolution according to the control mode of servo amplifier and response characteristic by the variation of integral gain are tested and compared. Relationship between micro motion behavior of hydrostatic table and the output torque is also tested for acquiring the effective variables on control characteristics. From the results. it is confirmed that the torque control mode has a advantage in microstep resolution, and more stable than velocity control mode in low feed rate, and by the increase of integral gain in the elastic motion realm, response characteristics can be improved.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.157-157
• /
• 2000

In the fuzzy control for the multi-variable system, it is difficult to obtain the fuzzy rule. Therefore, the parallel structure of the independent single input-single output fuzzy controller using a pairing between the input and output variable is applied to the multi-variable system. The concept of relative gain matrix is used to obtain the input-output pairs. However, among the input/output variables which are not paired the interactive effects should be taken into account. these mutual coupling of variables affect the control performance. Therefore, for the control system with a strong coupling property, the control performance is sometimes lowered. In this paper, the effect of mutual coupling of variables is considered by tile introduction of a simple compensator. This compensator adjusts the degree of coupling between variables using a neural network. In this proposed neuro-fuzzy controller, the Neural network which is realized by back-propagation algorithm, adjusts the mutual coupling weight between variables.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2040-2042
• /
• 2002

In this paper, we consider the design of gam scheduled controllers for linear systems with input saturation. We obtain a reachable set and a control gain, which guarantees that the controls are never saturated inside this reachable set and that the $L_2$ gain is minimized, from matrix inequalities. This proposed gain scheduled control gives better performance than that of static control case, and we present the simulation results to show the usefulness of the proposed control.