• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1241-1244
• /
• 1996

This paper present a performance evaluation method for Timed Place Petri Nets modeled by Live-and-Bounded Circuits (LB-circuits) through a bottom-up approach. The method can handle the case for the nets having common resources(CR). The target system is divided into the sub-systems by disconnecting the common Transition-Transition-Path(TTP) or Place-Place-Path (PPP) between sub-systems. The common PPP pattern is classified into Parallel Common Resource (PCR) and Sequential Common Resource (SCR) in detail for handling common resources. We evaluate the performance of each divided sub-system, and calculate the sub-systems affect on the performance of the whole system. The facts are generalized as a theorem. The developed theorem are applied into the performance evaluation of an automated assembly system shown in an example. All the results are verified by simulation.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.4
• /
• pp.332-342
• /
• 1995

The important factors of reaction conditions in sol-gel transition of silicon alkoxide solution have been reviewed and discussed on the basis of Raman study. Various factors such as type of catalyst, alkoxide, solvent, drying control chemical additive and water content affect the conversion mechanism in sol-gel process.

• Journal of Power Electronics
• /
• v.7 no.1
• /
• pp.55-63
• /
• 2007

This paper proposes a simple unity power factor zero-voltage-transition (ZVT) pulse-width-modulated (PWM) single-phase rectifier, which features reduced switching and conduction losses. The switching loss reduction is achieved by a simple auxiliary commutation circuit, and the conduction loss reduction is achieved by employing a single-stage converter, rather than a typical double-stage converter comprising of a front-end rectifier and a boost rectifier. Furthermore, thanks to good features such as a simple PWM control at constant frequency, low switch stress, low Var rating of commutation circuits, and simple power circuit structure, it is suitable for high power applications. The principles of operation are explained in detail, and a major characteristics analysis and the experimental results of the new converter are also included in this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.261-261
• /
• 2000

This paper analyzes the characteristics of pre-sliding friction of an X-Y table of CNC machining center at velocity reversal, and presents a simple and effective method of friction compensation based on this characteristics. At velocity reversal, a large position tracking error occurs because of the discontinuous change of friction. The relationship between the occurrence time of maximum position tracking error and the acceleration at zero velocity is analyzed by using the spring-like friction model. Furthermore, the experimental observation verifies this relation. From this, the state transition tine from pre-sliding regime into sliding regime can be predicted. Using the predicted transition time, the friction can be effectively compensated and table experimental results show its effectiveness.

• Journal of Communications and Networks
• /
• v.5 no.3
• /
• pp.202-214
• /
• 2003

The central challenge in the design of ad-hoc networks is the development of dynamic routing protocol that efficiently finds route between mobile nodes. Several routing protocols such as DSR, AODV and DSDV have been proposed in the literature to facilitate communication in such dynamically changing network topology. In this paper, a Node Transition Probability (NTP) based routing algorithm, which determines stable routes using the received power from all other neighboring nodes is proposed. NTP based routing algorithm is designed and implemented using Global Mobile Simulator (GloMoSim), a scalable network simulator. The performance of this routing algorithm is studied for various mobility models and throughput, control overhead, average end-to-end delay, and percentage of packet dropped are compared with the existing routing protocols. This algorithm shows acceptable performance under all mobility conditions. The results show that this algorithm maximizes the bandwidth utilization during heavy traffic with lesser overhead.

• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.289-294
• /
• 2001

A curved track needs balanced super elevation according to the speed of the passing train and it is limited by maximum allowable amount. Therefore, passing speed at high degree curved track has to be controlled below the limits. Accurate position of the Speed Limit Post(SLP), which shows allowable speed of curved track dose not regulated so design and line side maintenance engineer adopt the position differently, When the rate of cant deficiency is considered on transition-curved section, the SLP should be located at the beginning point of the transition curve so as to control the speed of passing train and it will increase ride quality to passenger.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.1
• /
• pp.33-37
• /
• 2013

The properties of LTCC green sheets formed by the MLS-22 powder of NEG Inc. were investigated for acrylic binders with different PVB and Tg in the variation of temperature. The elongation of the green sheets showed large variation depending on the temperature, and was rapidly decreased near the Tg of the sheets. With the increase of the ratio of plasticizer/binder (P/B), large elongation of the sheets was observed due to the decrease of the Tg. In the stacking process of the multilayer ceramic, the optimal control of the temperature is highly required depending on the Tg of the binder and the ratio of P/Buniform coating.

• Journal of Power Electronics
• /
• v.2 no.4
• /
• pp.312-324
• /
• 2002

This paper presents a new PWM DC/DC converter with dual output power using single power stage, which has the isolation characteristics between each dual output. The proposed converter topology consists of two switches ($S_B$ and $S_F$) and only single secondary winding. Therefore, the proposed converter has better advantages of not only low cost and small size but also high power density because of using minimum components and devices compared with conventional methods which use multi winding transformers or several converters. The operating principle of the proposed converter topology, which includes the conventional auxiliary ZVT (Zero-Voltage-Transition) circuit to implement soft switching of the main switch, is illustrated in detail and the validity of the proposed converter is verified through several simulated and experimental results.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.6
• /
• pp.448-453
• /
• 1986

Two contributions to the activation barrier of the $S_N2$ reaction, intrinsic and thermodynamic, are discussed in connection with the predictive power of various rate-equilibrium relationships. It has been shown that the PES models can only give correct predictions of changes in structure and energy of the transition state if the activation barrier is dictated by the thermodynamic factor. We concluded that the identity and dissociative $S_N2$ reactions are dominated by the intrinsic component while associative $S_N2$ reactions are predominantly of thermodynamic controlled. Thus in the former cases, the PES models fail, whereas in the latter cases predictions based on the intrinsic factor, the quantum mechanical models, fail. Finally in a general case of equal contributions by thermodynamic and intrinsic factors, the $SN_2$ reaction proceeds by a synchronous process with zero net charge on the reaction center, for which predictions of substituent effects will be the same as for the intrinsic control case.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.11
• /
• pp.1313-1318
• /
• 1999

Lewis bases were employed to control the stoichiometry of ferrite film prepared by light enhanced plating (LEP) technique. When 2,2'-bipyridyl was used as a Lewis base, conversion electron Mosbauer spectroscopy (CEMS) and x-ray powder diffraction (XRD) experiments showed that the main component of the ferrite films was metal-deficient magnetite (Fe3(1-δ)O4). Nonstoichiometry and roughness of LEP films were increased by the addition of 2,2'-bipyridyl. Using ethylenediaminetetraacetate (EDTA) as a Lewis base, produced film that was a mixture of magnetite and Υ-FeO(OH). No low temperature transition (Verwey transition) of magnetite was detected in resistivity and ac-susceptibility measurements for the LEP films. Surface morphology of the LEP films was observed by atomic force microscopy (AFM). The size of dominant particles was about 0.2 μm.