• KIEAE Journal
• /
• v.6 no.1
• /
• pp.57-62
• /
• 2006

Korean Traditional houses has been evolved and developed in many years, adopting the natural environment to control exterior conditions. These control method are various passive system of using natural materials, considering micro climate, building lay out, and these system are more natural and ecological to make the comfortable indoor climate than active systems of the present houses. This study aims to analyzed control performance of outdoor environment of five Korean traditional houses during the summer and winter. These houses are varied with lay out and floor plan to reflect the way of control for environmental condition, surveyed the reverberation time and sound level difference between rooms of the main living room and other main floored room, master room and kitchen. Especially air temperature and humidity have been measured simultaneously in each rooms to compare with outdoor condition. As a result, the variation of air temperature and humidity of most rooms are considerably static while condition of outdoors are much varied, it is showed that indoor climate has been controled with traditional soiled walls.

• Journal of Biosystems Engineering
• /
• v.39 no.2
• /
• pp.76-86
• /
• 2014

Purpose: The objective of this study was to measure emissions of gases (ammonia ($NH_3$), hydrogen sulfide ($H_2S$) and carbon dioxide ($CO_2$)), volatile organic compounds (VOC) and odor from two shallow pit pig nursery rooms. Gas and odor reduction practices for swine operations based on the literature were also discussed. Methods: This study was conducted for 60 days at a commercial swine nursery facility which consisted of four identical rooms with mechanical ventilations. Two rooms (room 1 (R1) and room 2 (R2)) with different pig numbers and ventilation rates were used in this study. The pig manure from both the R1 and R2 were characterized. Indoor/outdoor temperatures, ventilation rates/duration, $NH_3$, $H_2S$, $CO_2$, and VOC concentrations of the ventilation air were measured periodically (3-5 times/week). Odor concentrations of the ventilations were measured two times on two days. Three different types of gas and odor reduction practices (diet control, chemical method, and biological method) were discussed in this study. Results: The volatile solids to total solids ratio (VS/TS) and crude protein (CP) value of pig manure indicated the pig manure had high potential for gas and odor emissions. The $NH_3$, $H_2S$, $CO_2$ and VOC concentrations were measured in the ranges of 1.0-13.3, 0.1-5.7, 1600-3000 and 0.0-1.83 ppm, respectively. The $NH_3$ concentrations were found significantly higher than $H_2S$ concentrations for both rooms. The odor concentrations were measured in the range of $2853-4432OU_E/m^3$. There was significant difference in odor concentrations between the two rooms which was due to difference in pig numbers and ventilation duration. The literature studies showed that simultaneous use of dietary control and biofiltration practices will be more effective and environmentally friendly for gas and odor reductions from pig barns. Conclusions: The gas and odor concentrations measured in the ventilation air from the pig rooms indicate an acute need for using gas and odor mitigation technologies. Adopting diet control and biofiltration practices simultaneously could be the best option for mitigating gas and odor emissions from pig barns.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.7
• /
• pp.1019-1023
• /
• 2001

An on-farm trial was conducted in temperature-controlled lactation rooms at a commercial pig farm to investigate the efficacy of broadcasting sow suckling grunts from day 4 of lactation, on increasing piglet growth to weaning. In the Broadcast treatment, sows and litters were exposed to a 3-min broadcast from loud-speakers every 42 min. The Control treatment was not exposed to the broadcast. All sows and litters had similar husbandry and piglets were provided with creep feed on the floor twice daily. In each of the three replicates in time, the Broadcast and Control treatments were allocated to different lactation rooms at random and there were 12 sows and litters per treatment per replicate. A total of four identical lactation rooms were available for the trial, each containing 28 conventional sow and litter crates with piglet heater in the creep area. A non-trial room separated the two treatment rooms in each replicate to minimise the chance that the broadcast grunt stimulation was audible to the Control treatment litters. Five "normal and average-looking" piglets from the trial litters were weighed twice, 7 d apart. The cohort of five piglets was identified by ear-tags and formed the experimental unit for the statistical analysis. The average (${\pm}SD$) age of piglets at initial weighing was 7.7(${\pm}2.22$) days. For each litter, mean piglet live weight at day 14 of lactation was estimated by linear regression of the two weights recorded seven days apart, when on average, the Broadcast treatment had been exposed to the stimulation for 10 days. Piglets in the Broadcast treatment were heavier (p<0.01) at day 14 of lactation compared to Control treatment (4.24 and 3.92 kg, respectively) and tended to have a greater average daily weight gain over the 7-d period (245 and 228 g/day, respectively; p<0.08). The results suggest piglet growth was improved by about 8% in response to the regular, timed broadcast of sow suckling grunts in the lactation shed. The independent contributions of milk and creep feed to the improved growth remain to be determined.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.2
• /
• pp.387-392
• /
• 2022

In addition to complying with access standards for facilities that require infection control (operating rooms, delivery rooms, intensive care units, etc.) in accordance with the 2019 Medical Care Act Enforcement Regulations, entry, exit, contact information, etc. for entry and exit, the criteria for entering and exiting special rooms of medical institutions have been revised so that records of facts are kept for one year. However, even now, the inconvenience continues due to the fact that such contents are created by hand or due to errors. For this reason, this study designed and implemented a system that provides automatic opening, closing, and accessing record storage functions for authorized users using IoT devices and UWB technology, and we expected that the convenience of the visitors and systemized access control will be possible.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.10
• /
• pp.697-703
• /
• 2010

In recent semiconductor manufacturing clean rooms, air washers are used to remove airborne gaseous contaminants from the outdoor air introduced into a clean room. Meanwhile, there is a large amount of exhaust air from a clean room. From an energy conservation point of view, heat recovery is useful for reducing the outdoor air conditioning load required to maintain a clean room. Therefore it is desirable to recover heat from the exhaust air and use it to cool or heat the outdoor air. In the present study, numerical analysis was conducted to evaluate the recovered heat of an exhaust air heat recovery type air washer system, which is the key part of an energy saving outdoor air conditioning system for semiconductor clean rooms. The present numerical results showed relatively good agreement with the available experimental data.

• Journal of Multimedia Information System
• /
• v.6 no.4
• /
• pp.329-332
• /
• 2019

Recently, smart lighting systems are the combination between sensors and lights. These systems turn on/off and adjust the brightness of lights based on the motion of object and the brightness of environment. These systems are often applied in places such as buildings, rooms, garages and parking lot. However, these lighting systems are controlled by lighting sensors, motion sensors based on illumination environment and motion detection. In this paper, we propose an automatic lighting control system using one single camera for buildings, rooms and garages. The proposed system is one integration the results of digital image processing as motion detection, hand gesture detection to control and dim the lighting system. The experimental results showed that the proposed system work very well and could consider to apply for automatic lighting spaces.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.97-106
• /
• 2013

Objective: The aim of this study is to investigate the attributing factors influencing team performance. Background: Technically, it is necessary that operators adapt themselves to computerized and advanced techniques to operate the main control rooms safely in nuclear power plant in Korea. The more main control rooms are digitalized, the more important for operators to have high team performance it is. Method: This paper analyzes team process through literatures review and elicits team performance shaping factor. Especially, the objective of this research is to elicit communication using common team performance shaping factors. Results: This study has found communication through team performance shaping factors in Main Control Room of the SMART. Conclusion: This paper can offer a starting point for team communication, which can use team performance shaping factor framework that are emerging in these new nuclear power plant. Application: As a result, I expect that the evaluation communication for MCR operator's team performance will lead the operating techniques in nuclear power industry internationally.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.3
• /
• pp.446-454
• /
• 2008

Control devices for fire safety systems located in a engine room are to be arranged at a safe position which is easily accessible during a fire. To develop an interpretation for the safe position in engine rooms, calculation and experiments are carried out to determine a correlation between radiant heat and distance from fire in this paper. On the basis of results of this research, the control devices for a main engine are to be installed in the behind side of an obstruction to reduce radiant heat from the fire of the main engine. In case of other control devices, they are also to be provided in the same manner of control devices for the main engine or are to be placed with 5 meters far from fire hazards.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.19 no.2
• /
• pp.212-222
• /
• 2012

Purpose: The purpose of this study was to examine the effects of infection control education for families of patients infected with vancomycin resistant enterococcus (VRE). Method: Forty family members of VRE patients were chosen from a university hospital and assigned to the experimental or control group. The experimental group was provided infection control education that consisted of one-on-one instruction using an information booklet, hand-washing video, and demonstration of hand washing practice. Dependent variables were self-reported knowledge and performance of VRE infection control measures, and the number of hand washings when entering and leaving patients' rooms. Results: Knowledge and performance scores were significantly higher for the experimental group compared to the control group. The experimental group washed their hands significantly more often when entering and leaving patients' rooms than the control group. Conclusion: Infection control education for family members of VRE patients was effective in improving knowledge and performance of infection control measures as well as improving the practice of hand washing. Further investigation is needed on the effects of infection control education for families on the actual VRE colonization and/or infection rate.

• Korean Institute of Interior Design Journal
• /
• v.19 no.6
• /
• pp.249-256
• /
• 2010

For guaranteeing for security of nuclear power plant, ergonomic factors have been applied to design of main control room, core area for management and control of nuclear power plant, but design elements for performance of operators have been ignored. As the behaviors of operators are important for security of nuclear power plant, space design which makes them pleasant psychologically and makes them maintain attention on security equipments ceaselessly is required. Therefore, the purpose of this study is to analyze space characteristics of main control rooms according to regulations of nuclear power plant and general guidelines of space design, and to offer basic data for designing of main control room which makes operators pleasant psychologically and physically. At first, theoretical issues related with design of main control room are reviewed and several premises of space are developed by abstracting design elements from common space and regulations of nuclear power plant and, then integrating each design elements interactively. In short, the improvement of system environment based on human-machine interface space has brought about perceptual, cognitive, and spatial changes and has realized next generation of main control rooms. And, differences and similarities between ordinary space and main control room, which ergonomic sizes and regulations are applied and is VDT environment based on LDP, are discussed in relation to 13 design elements and 17 space premise.