• 수산해양기술연구
• /
• 제30권4호
• /
• pp.320-328
• /
• 1994

In 1980 s to 1990 s the marine propulsion diesel engines have been developed into lower speed and longer stroke for the enegy saving (small S.F.O.C). As these new trends the conventional mechanical-hydraulic governors were not adapted to the new requirements and the digital governors have been adopted in the marine use. The digital governors usually use the control algorithms such as the PID control, optimal control, adaptive control and etc. While the engine has delay time and parameter variations these control algorithms have difficulty in considering the stability and the robustness for the model uncertainty. In this study, the $H_{\infty}$ controller design method are applied in order to design the feedback controller K(s) to the speed control of the low speed marine diesel engine, and the two-degree-of-freedom control system is constituted with $H_{\infty}$controller. By comparison of responses of the two-degree-of-freedom control system under the delay time and parameter variations is confirmed.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권2호
• /
• pp.53-57
• /
• 2012

The mathematical model of a three-phase voltage source pulse-width modulation (PWM) DC/AC inverter is non-linear, and in view of the traditional linear control strategy it can not meet the requirements of designing a high-performance inverter. What's more, when the loads are not pure resistive loads, the inverter further requires that the controller possess high-performance. This paper proposes a nonlinear control strategy for the inverter called Passivity-based Control. We can alter the inverter model in three-phase abc coordinate to two-phase synchronous rotating dq coordinate for establishing the port-control Hamiltonian (PCH) model for this system. We can control the distribution of energy in the system to achieve the control aim. Simulation results show that the passivity-based control method can make this system possess a level of high-performance that is both robust and dynamic.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.287-291
• /
• 1992

Recently, electronic engine control system is used in many automotives for high efficiency and low pollution. In order to perform these requirements, fuel injection control, spark timing control, knock control, exhaust gas recirculation control and idle speed control should be implemented. In this paper, idle speed control system using microcontroller is developed, which is compact in hardware, but powerful in software performing efficient control and various compensations for engine condition and environments. If idle speed is low engine operation is not smooth, reversely if high, fuel consumption is increased. Therefore idle speed must be maintained as low as possible within the scope that ensures smooth operation of engine. Also, an engine signal simulator, which generates various signals from engine, is realized for test facility.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권9호
• /
• pp.4188-4206
• /
• 2016

Power control is widely used to reduce co-channel interference in wireless networks and guarantee the signal-to-interference plus noise ratio (SINR) of ongoing connections. This technique is also effective for wireless body area networks (WBANs). Although achieving satisfactory SINR is important for WBAN users, they may not be willing to achieve it at arbitrarily high power levels since power is a scarce resource in WBANs. Besides, for WBANs with different purposes, the QoS requirements and concern about the power consumption may be different. This motivates us to formulate the power control problem using the concepts from microeconomics and game theory. In this paper, the QoS objective is viewed as a utility function, which represents the degree of user satisfaction, while the power consumption is viewed as a cost function. The power control problem consequently becomes a non-cooperative multiplayer game, in which each player tries to maximize its net utility, i.e., the utility minus the cost. Within this framework, we investigate the Nash equilibrium existence and uniqueness in the game and derive the best response solution to reach the Nash equilibrium. To obtain the optimal transmission power in a distributed way, we further propose a utility-based and QoS-aware power control algorithm (UQoS-PCA). Tunable cost coefficient in UQoS-PCA enables this scheme to be flexible to satisfy diverse service requirements. Simulation results show the convergence and effectiveness of the proposed scheme as well as improvements over existing algorithm.

• 한국전자통신학회논문지
• /
• 제11권1호
• /
• pp.1-8
• /
• 2016

원자력발전소는 주요 국가기반시설로 보호되고 있으며, 계측제어계통은 보호, 제어 및 감시등의 기능을 수행하는 원전을 구성하는 핵심 설비로서, 과거의 아날로그 장비에서 컴퓨터와 네트워크에 기반 한 디지털 기술로 진화하고 있다. 또한, 계측제어계통에서는 대부분 원전용 제어기를 사용하지만, 일반적인 IT 자원의 사용도 증가하고 있는 실정이다. 스턱스넷으로 인한 원자력 시설의 제어기 침해 사고 및 여타 원전의 사이버 사고로 인해 원자력발전소에 대한 사이버보안 문제가 대두되고 있다. 본 논문에서는 원전 사이버 보안을 위해 규제지침의 접근제어 요건분석을 통하여 원전 계측제어계통에 적용 가능한 혼합형 접근제어 모델을 제시하였다. 제안하는 혼합형 접근제어 모델은 가동 중인 국내 원전 및 건설 중인 신규 원전에 구현하여, 원전의 안전성을 효율적으로 증대 시킬 수 있을 것으로 판단된다.

• 한국정보전자통신기술학회논문지
• /
• 제10권6호
• /
• pp.535-544
• /
• 2017

본 논문은 UAV의 RF방식에 따른 정보 송수신의 한계를 극복하기 위해 이동통신 기반의 비행 중인 수 많은 UAV의 위치를 동시에 확인하고 관제를 N:N으로 할 수 있도록, LTE모뎀을 경량 및 저전력 기술을 활용하여 운행중인 UAV에 대한 정보를 수신하고 통제 할 수 있는 방안을 연구하였다. 본 연구를 통해 언제 어디서든지 네트워크에 접속하여 고해상도의 영상을 전송하여 실시간 위치추적 관제 할 수 있는 방안을 제시 하고, 이를 위해 LTE기반의 UAV의 통신 모듈 시스템을 제시함으로써 실시간 고속의 데이터 통신 기술을(3G, 4G LTE, 블루투스) 활용하여 LTE 모뎀의 요구사항 및 기준 요건을 제시하여 비행 중인 UAV의 동시 모니터링을 위한 N:N 관제 체계 개념 및 구현 기술(관제 시스템 구조, 관제 데이터 흐름도, 비행계획 수립 및 전송, 실시간 위치추적) 검증에 대해서 연구하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권2호
• /
• pp.247-268
• /
• 2011

Due to the application-specific nature of wireless sensor networks, the sensitivity to such a requirement as data reporting interval varies according to the type of application. Such considerations require an application-specific, parameter tuning paradigm allowing us to maximize energy conservation prolonging the operational network lifetime. In this paper, we propose a reporting interval adaptive, sensor control platform for energy-saving data gathering in wireless sensor networks. The ultimate goal is to extend the network lifetime by providing sensors with high adaptability to application-dependent or time-varying, reporting interval requirements. The proposed sensor control platform is based upon a two phase clustering (TPC) scheme which constructs two types of links within each cluster - namely, direct link and relay link. The direct links are used for control and time-critical, sensed data forwarding while the relay links are used only for multi-hop data reporting. Sensors opportunistically use the energy-saving relay link depending on the user reporting, interval constraint. We present factors that should be considered in deciding the total number of relay links and how sensors are scheduled for sensed data forwarding within a cluster for a given reporting interval and link quality. Simulation and implementation studies demonstrate that the proposed sensor control platform can help individual sensors save a significant amount of energy in reporting data, particularly in dense sensor networks. Such saving can be realized by the adaptability of the sensor to the reporting interval requirements.

• 대한임상검사과학회지
• /
• 제50권2호
• /
• pp.77-84
• /
• 2018

In Singapore, biosafety and biosecurity measures are controlled by the Biological Agents and Toxins Act (BATA) and other requirements by regulatory agencies. The law prohibits and otherwise regulates the possession, use, import, transhipment, transfer, and transportation of biological agents, inactivated biological agents, and toxins that are of public health concern. The law also defines the facility requirements for high risk biological agents and toxins. The containment facility (BSL 3) is a minimum requirement to handle biological agents that falls under Schedule 1 (Risk Group 3). The Nanyang Technological University School of Biological Sciences Biosafety Level 3 Facility (NTU-SBS BSL 3) was designed specifically for research involving potential hazardous biological materials. The facility requires yearly re-certification by an approved facility certifier to meet the local requirements and international biosafety standards for a containment facility in many instances. On the other hand, most NTU researchers conduct biological projects involving biological agents with low or moderate risk groups (Risk Groups 1 and 2 or biological agents described in schedule 3 and 4 of BATA) and GMOs, which need only a BSL 2 laboratory. BSL 2 laboratories are yet to be legally certified or registered in Singapore. Institutional Biosafety Committee (IBC) identifies the requirements; defines a minimum standard in the safe control of biological risks and registers all BSL 2 laboratories in the NTU. Therefore, under the guidance of the IBC, the University Biosafety and Biosecurity Programme includes the audit and certification program as a unique and an internal exercise to bring NTU biosafety to a higher level.

• 한국항행학회논문지
• /
• 제28권1호
• /
• pp.109-115
• /
• 2024

도심항공 모빌리티 (UAM; urban air mobility) 서비스를 위한 한국의 K-UAM 운용개념서에서는 초기 운용 과정에서 항공음성통신 뿐만 아니라 4G 및 5G 이동통신의 활용을 고려하고 있다. 본 논문은 UAM 교통관리를 위한 통신 성능 요구사항을 설정하기 위한 방법론을 연구하였으며, 초기 UAM 운항을 위한 통신 성능 요구 항목과 수준을 제시하였다. 이를 위해 K-UAM 운용개념서와 미국 FAA 운용개념서의 UAM 발전 단계별 운영 시나리오를 분석하고, 다양한 UAM 이해관계자 간에 UAM 운용을 위해 전달해야 할 메시지의 종류를 식별하였다. 또한, 이러한 메시지의 전송을 위해 필요한 통신 링크 종류, 데이터 크기, 전송 주기, 허용 가능 지연, 가용성 등을 고려하여 통신 성능 요구사항 초안을 도출하였다. 본 연구 결과는 UAM 서비스를 위한 통신 요구사항 설정 관련 최초 연구로서 향후 UAM 전용 통신망 설계 및 필요 주파수 소요량 산출과 같은 분야에서 유용하게 활용될 것으로 기대된다.

• 드라이브 ㆍ 컨트롤
• /
• 제21권2호
• /
• pp.44-52
• /
• 2024

In this study, we predicted PTO power requirements based on torque predicted by the discrete element method and the multi-body dynamics coupling method. Six different scenarios were simulated to predict PTO power requirements in different soil conditions. The first scenario was a tillage operation on cohesionless soil, and the field was modeled using the Hertz-Mindlin contact model. In the second through sixth scenarios, tillage operations were performed on viscous soils, and the field was represented by the Hertz-Mindlin + JKR model for cohesion. To check the influence of surface energy, a parameter to reproduce cohesion, on the power requirement, a simple regression analysis was performed. The significance and appropriateness of the regression model were checked and found to be acceptable. The study findings are expected to be used in design optimization studies of agricultural machinery by predicting power requirements using the discrete element method and the multi-body dynamics coupling method and analyzing the effect of soil cohesion on the power requirement.