• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.287-291
• /
• 1992

Recently, electronic engine control system is used in many automotives for high efficiency and low pollution. In order to perform these requirements, fuel injection control, spark timing control, knock control, exhaust gas recirculation control and idle speed control should be implemented. In this paper, idle speed control system using microcontroller is developed, which is compact in hardware, but powerful in software performing efficient control and various compensations for engine condition and environments. If idle speed is low engine operation is not smooth, reversely if high, fuel consumption is increased. Therefore idle speed must be maintained as low as possible within the scope that ensures smooth operation of engine. Also, an engine signal simulator, which generates various signals from engine, is realized for test facility.

• Journal of Astronomy and Space Sciences
• /
• 제26권4호
• /
• pp.643-650
• /
• 2009

Korea Astronomy and Space Science Institute (KASI) has been developing one mobile and one stationary SLR system since 2008 named as ARGO-M and ARGO-F, respectively. KASI finished the step of deriving the system requirements of ARGO. The requirements include definitions and scopes of various software and hardware components which are necessary for developing the ARGO-M operation system. And the requirements define function, performance, and interface requirements. The operation system consisting of ARGO-M site, ARGO-F site, and Remote Operation Center (ROC) inside KASI is designed for remote access and the automatic tracking and control system which are the main operation concept of ARGO system. To accomplish remote operation, we are considering remote access to ARGO-F and ARGO-M from ROC. The mobile-phone service allows us to access the ARGO-F remotely and to control the system in an emergency. To implement fully automatic tracking and control function in ARGO-F, we have investigated and described the requirements about the automatic aircraft detection system and the various meteorological sensors. This paper addresses the requirements of ARGO Operation System.

• 제어로봇시스템학회논문지
• /
• 제1권1호
• /
• pp.50-57
• /
• 1995

In this paper, the design and the implementation of the controller for an articulate robot, which is developed in our Automatic Control Laboratory, are mainly discussed. The controller reduces software computational load via distributed processing method using multiple CPU's, and simplifies structures by the time-division control with TMS320C31 DSP chip. The method of control is based on the fuzzy-compensated PID control with scale factor, which compensates for the influence of load variation resulting from the various postures of the robot with conventional PID scheme. The application of the proposed controller to the robot system with DC servo-motors shows some excellent control capabilities. Also, the response characteristics of system for the various trajectory commands verify the superiority of the controller.

• 한국정밀공학회지
• /
• 제23권2호
• /
• pp.65-72
• /
• 2006

Downcoiler is one of the major facilities in hot strip mill operation. The key to good coiling is having good equipment, modem control systems, excellent maintenance and an understanding of coiling process. Therefore, this study aims to develop a program that is useful for calculating machine design parameters and simulating coiling process. In this study, the pinching and coiling mechanism of the downcoiler was thoroughly studied and some of operational factors and their effects on the coiling process were investigated. The software was developed to estimate engineering parameters for coiler component design and to determine optimal setting values for successful coiling operation. In order to check the accuracy and usefulness of the developed software, the simulation of the downcoiler in $\#2$ Hot Strip Mill in Pohang Works was performed. The simulation results suggested that the set-up value for unit tension could be lowered. Test coiling operation by using the lowered set-up value for unit tension resulted in much more successful coiling in the aspect of strip quality and power consumption.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.550-552
• /
• 1995

Real time informations from industrial power system in operation can be used for efficient energy conservation, optimal operation of electrical equipments, and expansion planning of apparatus. Requirements for energy conservation and supplied power quality in customers are increasing significantly because of their effects on the production cost and efficiency. Thus, the development of low cost power management system which can can operate in domestic power system properly is substantially requested. In this research, operation software for real time monitoring and control system in customer power system has been developed to achieve the above purposes. The development of the operating software and related technologies are expected to be applied successfully for reducing electricity cost, enhancing power quality, determining facility expansion planning, operating optimal power system, increasing production efficiency, and reducing maintenance cost.

• 천문학회보
• /
• 제44권2호
• /
• pp.78.2-78.2
• /
• 2019

The temperature control of a scientific device is essential because extreme temperature conditions can cause hazard issues for the operation. We developed a software which can interact with the temperature sensor using the GMT SDK(Giant Magellan Telescope Software Development Kit) version 1.6.0. The temperature sensor interacts with the EtherCAT(Ethernet for Control Automation Technology) slave via the hardware adapter, sending and receiving data by a packet. The PDO(Process Data Object) and SDO(Service Data Object), which are the packet interacts with each EtherCAT slave, are defined on the TwinCAT program that enables the real-time control of the devices. The user can receive data from the device via grs(GMT Runtime System) tools and log service. Besides, we programmed the software to print an alert message on the log when the temperature condition changes to certain conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.414-414
• /
• 2000

This paper presents a method for building a real-time kernel of autonomous mobile robot control systems. Until now, most of robots have their own operation softwares dedicated only for their use. Sometimes, operation softwares were developed based on MS-DOS or other real -time kernel based on UNIX. However, MS-DOS has many restrictions for use as a robot operation system. Also, mix based real-time kernel has some Limitations for use with mobile robots. So, in this paper, we focus on building a real-time kernel based on Linux. The in this paper, the software modules of Task Management, Memory Management, Intertask Communication, and Synchronization are redesigned. To show the efficiency of the paper, it was applied to run Nomad Super Scout II avoiding obstacles detected by sonar sensor array.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 추계학술대회
• /
• pp.32-33
• /
• 2010

This paper describes a droop control method for the autonomous operation of DC distribution system using distributed generations and energy storage. The method suppress the circulating current, and each unit could be controlled autonomously without communication system. Detailed model of wind power generation, photo-voltaic generation, fuel-cell generation and battery was implemented with the user-defined model of PSCAD/EMTDC software that is coded with C-language. The simulation and experimental results confirms that the proposed DC distribution system make it feasible to provide power to the load stably and verify effectiveness of the proposed method.

• 로봇학회논문지
• /
• 제15권1호
• /
• pp.39-47
• /
• 2020

This paper presents a control and operation system for a remotely operated vehicle (ROV). The ROV used in the study was equipped with a manipulator and is being developed for underwater exploration and autonomous underwater working. Precision position and attitude control ability is essential for underwater operation using a manipulator. For propulsion, the ROV is equipped with eight thrusters, the number of those are more than six degrees-of-freedom. Four of them are in charge of surge, sway, and yaw motion, and the other four are responsible for heave, roll, and pitch motion. Therefore, it is more efficient to integrate the management of the thrusters rather than control them individually. In this paper, a thrust allocation method for thruster management is presented, and the design of a feedback controller using sensor data is described. The software for the ROV operation consists of a robot operating system that can efficiently process data between multiple hardware platforms. Through experimental analysis, the validity of the control system performance was verified.

• 전력전자학회논문지
• /
• 제16권4호
• /
• pp.342-350
• /
• 2011

본 논문에서는 분산전원으로 풍력과 태양광, 에너지저장으로 배터리, 직류부하, 그리고 교류연계전력망으로 구성된 직류 마이크로그리드에서 Droop 제어를 기반으로 한 시스템의 자율동작을 분석한 내용에 대해 기술하고 있다. 자율동작의 분석을 위해 먼저 PSCAD/EMTDC 소프트웨어를 이용해 각 분산전원과 배터리의 시뮬레이션 모델을 개발하고 이를 바탕으로 Droop 제어를 검증하였다. 또한 시뮬레이션 결과를 바탕으로 3kW급 DC마이크로그리드의 하드웨어를 제작하여 실제적인 자율동작의 타당성을 분석하였다.