• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.354-356
• /
• 2006

In this paper, the position control performance of networked control systems is analyzed when time delay through the network is considered. Integrating a control system into a network has great advantages over the traditional control system which uses point to point connection: it allows remarkable reduction in wiring, makes it easy to install and maintain the system, and improves compability. However, a networked control system has the critical defect that network uncertainties, such as time delay, can degrade the control system's performance. Therefore, the major concern of a networked control system is analyzing the effect of network uncertainties. This paper is concerned with PID controller performance for stability region, critical stability region and unstability region under the time delay in the Controller Area Network.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2328-2330
• /
• 2003

This paper presents a new design methodology of networked control system using CAN(Controller Area Network). Feedback control systems having control loops closed through a network are called networked control systems. We design CAN nodes which can transmit control and monitoring data through network bus and apply these to networked control system design. We analyze the variation of stability property according to network-induced delay and determine a proper sampling period of networked control system that preserves stability performance. The results of the experimental example validate effectiveness of our networked control system.

• International Journal of Automotive Technology
• /
• v.7 no.6
• /
• pp.687-695
• /
• 2006

This paper presents a network-based traction control system(TCS), where several electric control units(ECUs) are connected by a controller area network(CAN) communication system. The control system consists of four ECUs: the electric throttle controller, the transmission controller, the engine controller and the traction controller. In order to validate the traction control algorithm of the network-based TCS and evaluate its performance, a Hardware-In-the-Loop Simulation(HILS) environment was developed. Herein we propose a new concept of the HILS environment called the network-based HILS(Net-HILS) for the development and validation of network-based control systems which include smart sensors or actuators. In this study, we report that we have designed a network-based TCS, validated its algorithm and evaluated its performance using Net-HILS.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.2
• /
• pp.100-108
• /
• 2014

In this paper, an idea of a network type distributed control of a system with inner loop control structure will be considered. Generally, in case of a control system with inner loop control structure, it is not easy to implement circuits and programming. Using network type distributed control structure, it will show how it is better than before. CAN(Controller Area Network) protocol which has been known that it has a high reliability on the signal in the various network protocols is used. Also, Arago's Disk System which has a inner loop control stucture is made to validate effectiveness of the proposed method.

• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.77-79
• /
• 2004

Because robot hardware architecture generally is consisted of a few sensors and motors connected to the central processing unit, this type of structure is led to time consuming and unreliable system. For analysis, one of the fundamental difficulties in real-time system is how to be bounded the time behavior of the system. When a distributed control network controls the robot, with a central computing hub that sets the goals for the robot, processes the sensor information and provides coordination targets for the joints. If the distributed system supposed to be connected to a control network, the joints have their own control processors that act in groups to maintain global stability, while also operating individually to provide local motor control. We try to analyze the architecture of network-based humanoid robot's leg part and deal with its application using the CAN(Controller Area Network) protocol.

• The KIPS Transactions:PartC
• /
• v.17C no.1
• /
• pp.129-134
• /
• 2010

Intelligent Power Switch (IPS) is a semiconductor device which contains a logic circuit in itself. It has received significant attention as a switching component to substitute the fuse and relay components in common automobile since the internal logic provides the controllability on the loads. However, a control system for the IPS status control and a network system to share the status information of IPS are required to fully exploit the capabilities of IPS. In this paper, we propose a control circuit and algorithm using IPS. Also the communication system between the control systems and IPS components using Control Area network (CAN) are proposed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.160-160
• /
• 2000

An optimization approach is used to solve the division problem of working area, and a cost function is defined to represent the constraints on the solution, which is then mapped onto the Hopfield neural network for minimization. Each neuron in the network represents a possible combination among many components. Division is achieved by initializing each neuron that represents a possible combination and then allowing the network settle down into a stable state. The network uses the initialized inputs and the compatibility measures among components in order to divide working area.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.37-38
• /
• 2006

In this paper, power distribution module for car relay control with Control area network is developed. This module is called Intelligent power distribution module because it has microprossor which can communicate with other electric module such as ECU and Body control module and also has self-diagonasis function. The developed IPDM module is tested on vehicle and the good performance has been achieved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.10 no.4
• /
• pp.201-207
• /
• 1985

The technology of Broadband LAN is required to unify, control and manage various infromation devices by sharing resources. This technology is applied for tele-conferencing, tele-control, tele-metering and 2-way CATV etc. besides Computer network by using multiple channels. This paper introduces the technology and cases of Broadband LAN which is the subnet of ISDN and the basis of FA and OA as the key-technology of MAN(Metropolitan Area Network) and WAN(Wide Area Network).

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2242-2244
• /
• 2003

This paper considers a networked control system (NCS) that consists of an inverted cart pendulum, a digital controller, and a controller area network (CAN) in which the actuator and sensors of the pendulum are connected to form a closed-loop system. The worst-case message response time (WCMRT) in the CAN is analyzed and the analysis results are applied to the target control system. For the case where the control system cannot satisfy the WCMRT condition and therefore time delays are inevitable, the Luck and Ray method is used to compensate the network-induced time delays. Simulations are carried out to show the feasibility of the proposed scheme.