• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5B
• /
• pp.771-776
• /
• 2010

In this paper, we present an efficient centralized dynamic bandwidth allocation scheme with multicasting for asymmetric 10G-Ethernet Passive Optical Networks (10G-EPONs). The proposed scheme is based on multicast-burst polling and provides quality of service (QoS) with class of service (CoS) to different lasses of packets. It is shown that a well-known conventional interleaved polling scheme severely decreases downstream channel capacity for user traffic when the upstream network load is low (avalanche gate frequency). To overcome this problem, we have proposed a multicast burst polling scheme which shows impressively lower downstream bandwidth consumption compare to IPACT and moreover it did not show the light load penalty problem. Simulation results using an OPNET tool show that the multicast burst polling effectively eliminates light-load penalty and minimizes downstream bandwidth consumption under avalanche gate frequencies.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.8 no.2
• /
• pp.217-231
• /
• 1997

This paper first reviewed the current neurological theories concerning the etiology of ADHD and secondly, examined results of studies that applied neuropsychological assessment methods in the examination of ADHD children both here in Korea and abroad. ADHD children were found to exhibit characteristic responses indicating deficits in vigilance, sustained attention, distractibility, allocation and regulation of attention in many assessments of attention, in addition to deficits in executive functioning, working and associative memory. Such neuropsychological assessment results suggest that in addition to dysfunction in the frontal lobe and the reticular activation system, dysfunction may exist in other neural pathways involving many areas of the brain. However, because a substantial number of neuropsychological assessment tools being employed in Korea for ADHD children had been developed abroad, a Korean standardization project involving ADHD and normal control children, in addition to other child psychiatric population pools must be conducted in order to obtain appropriate age norms and test validity, and in order to make possible a more accurate and precise comparison and interpretation in the assessment of ADHD children.

• KDI Journal of Economic Policy
• /
• v.27 no.2
• /
• pp.205-237
• /
• 2005

This paper analyzes a mechanism through which product market competition affects allocation of the managerial efforts. There are two types of firms, incumbents and entrants. Each incumbent firm delegates its control to a manager and cannot observe the manager's total effort. The managers of incumbent firms allocate their effort to two different activities: cost reduction (productive effort) and rent protection (unproductive effort). An increase in competition, measured by the number of incumbent firms, has two effects: an "output effect" which decreases the managerial incentive for productive effort, and an "effort substitution effect" that makes managers exert more productive effort and less unproductive effort. This paper identifies the conditions under which product market competition lowers the cost of providing incentives for productive effort and hence, to the conclusion that increased competition leads to increased efficiency.

• The KIPS Transactions:PartB
• /
• v.11B no.3
• /
• pp.361-368
• /
• 2004

This paper proposes an interactive VOD system to serve truly interactive VCR services using multicast delivery, client buffer and web-caching technique which implements the distributed proxy in Head-End- Network(HNET). This technique adopts some caches in the HNET that consists of a Switching Agent(SA), some Head-End-Nodes(HEN) and many clients. In this model, HENs distributively store the requested video under the control of SA. Also, client buffer dynamically expands to support various VCR playback rate. Thus, interactive services are offered with transmitting video streams from network, HENs and stored streams on buffer. Therefore this technique makes the load of network occur In the limited area, minimizes the additional channel allocation from server and restricts the transmission of duplicated video contents

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.1
• /
• pp.11-20
• /
• 2017

In this paper, we introduced linear spatial time series (space-time autoregressive and moving average model) and nonlinear spatial time series (space-time bilinear model). Also we estimated the parameters by Kalman Filter method and made comparative studies of power of forecast in the final model. We proposed several weight matrices such as equal proportion allocation, reciprocal proportion between distances, and proportion of population sizes. For applications, we collected Mumps data at Korea Center for Disease Control and Prevention from January 2001 until August 2008. We compared three approaches of weight matrices using the Mumps data. Finally, we also decided the most effective model based on sum of square forecast error.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.5
• /
• pp.1-6
• /
• 2011

LED(Light Emitting Diode) components have advantages of longer lifetime, lower power consumption and easy-to-control, compare to normal lamp and fluorescent light, according to the development of recent technologies. Thus, lots of illuminations which utilize LED components could be used. Recently, Visible Light Communication(VLC) which is a part of communication technologies, utilizing high speed response characteristic of LED components, started receiving public attention. In case of VLC, there is no need of frequency allocation due to no use of radio, but also no interference exists during data transmission, much different in ISM((Industrial Scientific Medical band). This is the reason why a lot of research results about VLC are becoming issued. In this paper, a survey of feasibility for using VLC utilizing an original LED illumination for underwater applications has been done and a primitive possibility of its application has been examined.

• 전자공학회논문지 IE
• /
• v.43 no.2
• /
• pp.80-86
• /
• 2006

The wireless communication based on LDPC and adaptive spatial-subcarrier coded modulation using MQAM for orthogonal frequency division multiplexing (OFDM) wireless transmission by using instantaneous channel state information and employing multiple antennas at both the transmitter and the receiver. Adaptive coded modulation is a promising idea for bandwidth-efficient transmission on time-varying, narrowband wireless channels. On power limited Additive White Gaussian Noise (AWGN) channels, low density parity check (LDPC) codes are a class of error control codes which have demonstrated impressive error correcting qualities, under some conditions performing even better than turbo codes. The paper demonstrates OFDM with LDPC and adaptive modulation applied to Multiple-Input Multiple-Output (MIMO) system. An optimization algorithm to obtain a bit and power allocation for each subcarrier assuming instantaneous channel knowledge is used. The experimental results are shown the potential of our proposed system.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.59-68
• /
• 2013

Objective: The purpose of this paper is to introduce a task complexity model combining task design aspects and complexity dimensions and to explain an approach to identifying and organizing task complexity factors based on the model. Background: Task complexity is a critical concept in describing and predicting human performance in complex systems such as nuclear power plants(NPPs). In order to understand the nature of task complexity, task complexity factors need to be identified and organized in a systematic manner. Although several methods have been suggested for identifying and organizing task complexity factors, it is rare to find an analytical approach based on a theoretically sound model. Method: This study regarded a task as a system to be designed. Three levels of design ion, which are functional, behavioral, and structural level of a task, characterize the design aspects of a task. The behavioral aspect is further classified into five cognitive processing activity types(information collection, information analysis, decision and action selection, action implementation, and action feedback). The complexity dimensions describe a task complexity from different perspectives that are size, variety, and order/organization. Combining the design aspects and complexity dimensions of a task, we developed a model from which meaningful task complexity factors can be identified and organized in an analytic way. Results: A model consisting of two facets, each of which is respectively concerned with design aspects and complexity dimensions, were proposed. Additionally, twenty-one task complexity factors were identified and organized based on the model. Conclusion: The model and approach introduced in this paper can be effectively used for examining human performance and human-system interface design issues in NPPs. Application: The model and approach introduced in this paper could be used for several human factors problems, including task allocation and design of information aiding, in NPPs and extended to other types of complex systems such as air traffic control systems as well.

• Herbal Formula Science
• /
• v.17 no.1
• /
• pp.75-83
• /
• 2009

Objective : The purpose of this study is to indicate of problems in statistical analysis method of "The Korean Journal of oriental Medical Prescription" and we will be proposed the useful application of the statistical analysis method. Methods : In this paper, we were analysed statistical analysis methodology from published journal articles "The Korean Journal of Oriental Medical Prescription" December, year 2000 to December, year 2008. We were investigated of problems in application of structured analysis methods those journal articles that including statistical analysis techniques and analysis methods. Results : 1. A random allocation of the experimental group and control groups are important factors in the planning process of statistical analysis. However, there are less explanation those journal articles. 2. There are no consideration in specimen size that there will be considerate by the level of significance and statistical test. 3. Many article authors were confused between parametric methods and non-parametric methods that they were applied parametric statistical analysis methods although inapplicable sample size. 4. There were applied the parametric methods consists of t-test instead non-parametric methods in the comparison of average intergroup relations. 5. There were less understanding posterior analysis and were confused with t-test. Conclusion : Our goal was to outline the key methods with a brief discussion of problems(statistical analysis methods), avenues for solutions. we recommend authors to use an appropriate statistical analysis methods for obtaining a more cautions results.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.1
• /
• pp.153-161
• /
• 2016

Semiconductor manufacturing has suffered from the complex process behavior of the technology oriented control in the production line. While the technological processes are in charge of the quality and the yield of the product, the operational management is also critical for the productivity of the manufacturing line. The fabrication line in the semiconductor manufacturing is considered as the most complex part because of various kinds of the equipment, re-entrant process routing and various product devices. The efficiency and the productivity of the fabrication line may give a significant impact on the subsequent processes such as the probe line, the assembly line and final test line. In the management of the re-entrant process such as semiconductor fabrication, it is important to keep balanced fabrication line. The Performance measures in the fabrication line are throughput, cycle time, inventory, shortage, etc. In the fabrication, throughput and cycle time are the conflicting performance measures. It is very difficult to achieve two conflicting goal simultaneously in the manufacturing line. The capacity of equipment is important factor in the production planning and scheduling. The production planning consideration of capacity can make the scheduling more realistic. In this paper, an input and scheduling rule are to achieve the balanced operation in semiconductor fabrication line through equipment capacity and workload are proposed and evaluated. New backward projection and scheduling rule consideration of facility capacity are suggested. Scheduling wafers on the appropriate facilities are controlled by available capacity, which are determined by the workload in terms of the meet the production target.