• 한국수자원학회논문집
• /
• 제52권11호
• /
• pp.947-950
• /
• 2019

이 논문의 주요 특징은 초기강우 유입 시 일차 침전지 처리효율을 개선하기 위한 운전제어 전략을 제공하는 것이다. 최근 IoT 기술과 센싱 기술이 발전함에 따라 하수처리시설 운전제어를 위한 기반이 개선되고 있으며, 온라인 측정결과를 활용한 일차침전지 처리효율 개선에 따라 미처리 하수의 하천 유출을 최소화하고, 하수처리시설 운영효율 개선에기여할 수 있다.

• International Journal of Advanced Culture Technology
• /
• 제10권1호
• /
• pp.180-186
• /
• 2022

This study is a pilot study to confirm the effectiveness of training after applying emergency simulation training for inactive nurses and to present a new model of simulation training operation method. In this study, the control group is a group that directly participates in the simulation activity, and the experimental group is the group that observes the control group's simulation activity. Experimental group and control group were matched 1:1 to experience all the roles of the resuscitation team. The study participants were 5 inactive nurses in the experimental group and 5 inactive nurses in the control group, and the total training time was 5 hours. The emergency simulation operation composition consists of theory education, skill education, and simulation. The interview was conducted. The educational satisfaction of the participants was 4.65 points for theory education and 4.70 points for practical education based on 5 points. Participants' performance confidence improved from 3.60 points before operation to 7.20 points after operation. Emergency simulation operation consisted of pre-test, theory education, skill education, simulation implementation, debriefing, and post-test. Participants expressed that the choice of group greatly reduced the burden and anxiety about performing the role of the resuscitation team. However, difficulties and inexperience in the operation of the defibrillator were reported in the experimental group. The control group reported that the simulation activity of the experimental group was not significantly different from theirs. Through the results of this study, it was confirmed that emergency simulation education not only reduced the burden and anxiety of inactive nurses, but also had an effect of education. Based on the research results, it is proposed to expand the participants and verify the effectiveness of education through specific variables such as learning commitment, learner confidence, simulation satisfaction, and team effectiveness.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1150-1159
• /
• 2017

Flexibility in the power control of ultrasonic transducers has remained a challenge for cleaning applications. This paper introduces a modification of the existing piezoelectric ceramic transducer (PCT) circuit to increase the range of operation through its impedance characteristics. The output power is controlled using the asymmetrical voltage-cancellation (AVC) method. Together with a phase-locked loop control, the switching frequency of the inverter is automatically adjusted to maintain a lagging phase angle under load-parameter variations during the cleaning process. With the proposed modification, the region of the zero-voltage switching (ZVS) operation is extended, which results in a wider range of output power control. A hardware prototype is constructed and the control algorithm is implemented using an STM32F4 microcontroller. Simulation and experimental results are provided to verify the proposed method for a 50-W PCT. The operating frequency and output power ranges under study are 37 - 41 kHz and 15.8 - 50 W, respectively.

• 산업기술연구
• /
• 제33권A호
• /
• pp.61-66
• /
• 2013

This paper is about the development of 80[kW] IPMSM(Interior Permanent Magnet Synchronous Motor) drive system for an electric vehicle. MTPA(Maximum Torque per Ampere) operation and flux-weakening operation for the optimal torque control of the IPMSM are presented. In this system, the torque control of the IPMSM is achieved by using the look-up table, which gives d- and q-aixs current references for the given torque command in the MTPA operation and flux-weakening operation regions. This look-up table is made by current injection tests, and from which the motor parameters are also estimated. The proposed system is verified by the experiment on the electric vehicle drive system, which consists of an 80[kW] IPMSM and an IGBT inverter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2535-2539
• /
• 2003

The haptic system becomes an essential device in the area of tele-operation, video entertainment and medical operation. To control a haptic device, impedance control method is widely used, but force sensor costs so much that open-loop control method is usually preferred for commercial purpose. In this case, modeled/un-modeled dynamics affects the performance of device. In this paper, we present a new 3DOF five-link type haptic device that we can reduce the effect of device dynamics and compensate its dynamics. We also evaluate its performance.

• Journal of Power Electronics
• /
• 제12권4호
• /
• pp.587-594
• /
• 2012

When a PWM rectifier has a low DC-link voltage during startup, the output voltage vector cannot be high enough to regulate the input current. This lack of a PWM rectifier output voltage vector can cause an unregulated inrush current when the rectifier operation starts. This paper presents a PWM rectifier start-up current control algorithm for when it starts operation with a lower DC-link voltage than unloaded condition case. To avoid the unregulated inrush current caused by a lack of DC-link voltage, the proposed control scheme regulates the one phase current with one switch chopping and it generates the current command considering the uncontrolled current magnitude information, which is calculated in advance. Simulation and experiment results support the validity of the proposed method.

• 대한인간공학회지
• /
• 제34권2호
• /
• pp.85-101
• /
• 2015

Objective: The purpose of this study was to develop and evaluate smart secondary controls using iPad for the drivers with physical disabilities in the driving simulator. Background: The physically disabled drivers face problems in the operation of secondary control devices that accept a control input from a driver for the purpose of operating the subsystems of a motor vehicle. Many of conventional secondary controls consist of small knobs or switches that physically disabled drivers have difficulties in grasping, pulling or twisting. Therefore, their use while driving might increase distraction and workload because of longer operation time. Method: We examined the operation time of conventional and smart secondary controls, such as hazard warning, turn signal, window, windshield wiper, headlights, automatic transmission and horn. The hardware of smart secondary control system was composed of iPad, wireless router, digital input/output module and relay switch. We used the STISim Drive3 software for driving test, customized Labview and Xcode programs for interface control of smart secondary system. Nine subjects were involved in the study for measuring operation time of secondary controls. Results: When the driver was in the stationary condition, the average operation time of smart secondary devices decreased 32.5% in the normal subjects (p <0.01), 47.4% in the subjects with left hemiplegic disabilities (p <0.01) and 38.8% in the subjects with right hemiplegic disabilities (p <0.01) compared with conventional secondary devices. When the driver was driving for the test in the simulator, the average operation time of smart secondary devices decreased 36.1% in the normal subjects (p <0.01), 41.7% in the subjects with left hemiplegic disabilities (p <0.01) and 34.1% in the subjects with right hemiplegic disabilities (p <0.01) compared with conventional secondary devices. Conclusion: The smart secondary devices using iPad for people with hemiplegic disabilities showed significant reduction of operation time compared with conventional secondary controls. Application: This study can be used to design secondary controls for adaptive vehicles and to improve the quality of life of the people with disabilities.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 추계학술논문발표회 논문집
• /
• pp.356-362
• /
• 2008

본 연구에서는 국내 화재 안전 기준 중 제연설비의 성능기준에 의해 지하 공간 건축물이 준공된 후 임의의 지점에서 화재가 발생했을 경우를 모델링하여 연기 확산 현상을 분석하고 제연 설비의 작동에 의한 재실자의 피난시간 연장과의 적정성을 검토하는 것이 목적이다. 본 연구의 선행연구에서는 가연물의 종류와 발열량을 추정하였으며 추정 값의 검토를 위하여 임의의 단일지하상가를 모델링하여 검증하였다. 그리고 지하상가의 제연설비가 작동될 경우와 작동되지 않을 경우에 대한 수치해석 결과를 비교하였으며 재실자의 피난시간을 확보하는 관점에서 화재 안전 기준에 대한 적정성을 검토하였다.

• 융합정보논문지
• /
• 제9권11호
• /
• pp.118-124
• /
• 2019

무인항공기의 기술이 많이 보급화 되면서 다양한 종류의 무인항공기 및 임무 다변화에 따라 다양한 종류의 임무 장비가 개발되고 있다. 그중에서도 국내에서는 소형 무인항공기가 활발히 개발되고 있으며 소형 무인기의 효과적인 조정을 위한 비행제어 시스템과 임무 장비의 연동 시스템이 필요하고, 또한 데이터를 처리하여 지상 운용시스템으로 전송을 위한 효율적인 통신장비의 구성 및 운용이 요구되고 있다. 본 논문에서는 소형 무인항공기의 임무 및 제어를 위하여 비행제어 시스템과 임무 장비 제어 시스템을 이용한 임무 장비의 확장, 데이터 링크 통합 및 통신장비 운용에 대하여 서술하였으며 이를 통하여 효과적인 소형 무인항공기의 운용에 대하여 정리하였다.

• 한국정보통신학회논문지
• /
• 제14권9호
• /
• pp.1965-1971
• /
• 2010

선박 추진제어플랫폼은 안전한 항해를 위한 추진기관으로 사용되는 선박주기엔진의 원격운전 및 제어를 담당하는 시스템이다. 본 시스템은 안전하고 신뢰성 있는 운항을 보장하는 시스템이며, 원격제어 기술이 요구되는 시스템이다. 본 연구에서는 해당 시스템의 국산화를 위한 연구의 일환으로서 선박 추진제어시스템의 속도전달장치의 구현에 대해 연구하며, 시스템 분석과 설계 및 구현을 통해 해당 분야의 노하우와 원천기술을 확보하고 추후 추진 제어플랫폼의 통합화를 위한 기반기술을 확보하고자 한다.