• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.321-324
• /
• 2000

In this paper, we proposed a new visual cryptography scheme based on optical interference which improves the contrast and SNR of reconstructed images comparing with conventional visual cryptography method. We divided an binary image to be encrypted into n slides. To encrypt them, (n-1) random independent keys and one another random key by XOR process between four random keys were prepared. XOR between each divided image and each random key makes encrypted n encrypted images. From these images, encrypted binary phase masks can be made. For decryption all of phase masks should be placed together in the interferometer such as Mach-Zehnder interferometer.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.118-120
• /
• 2003

The behavior of viscous fingerings caused by an external force is investigated by using a two­phase lattice Boltzmann method. The effects of the modified capillary number, the viscosity contrast, and the modified Darcy-Rayleigh number on the instability of interfaces are found. The calculated wave numbers are in good agreement with the theoretical ones in the range of wave numbers smaller than 10, but the calculated ones tend to become smaller than the theoretical ones in higher wave numbers.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.2
• /
• pp.189-198
• /
• 2004

We consider the problem of whether the three-dimensional checkerboard has the connectivity. For this purpose, we first consider the problem of determining the effective conductivity of a checkerboard-shaped composite material by the Brownian motion simulation method. Specifically, we use the efficient first-passage-time technique. Simulation results show that the effective conductivity of the three-dimensional checkerboard increases faster than the two-dimensional counterpart as the contrast between the phase conductivities increases. This implies that the three-dimensional checkerboard's connectivity is stronger than the two-dimensional checkerboard's and thus each phase material of the three-dimensional checkerboard is more likely to be connected than not to be connected.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.6
• /
• pp.539-544
• /
• 2016

This paper improves Sherman's two-pulse method for angle estimation of two unresolved targets in phase comparison monopulse radar. The proposed method provides the angle information with only a single-pulse measurement instead of two pulses. The proposed method can estimate a single-target angle by single-target indicator, in contrast with previous techniques. The accuracy of angle estimation for proposed method is demonstrated by simulations.

• Korean Journal of Microbiology
• /
• v.16 no.4
• /
• pp.148-154
• /
• 1978

Saccharomyces cerevisiae J170, a mutant, was used for $DL-^{14}C-leucine$ uptake during the sporulation and vegetative stage. $^{14}C-Leucine$ uptake into yeast cells appeared the highest at pH 6.0, indicating the same result of glucose transport, $^{14}C-Leucine$ uptake in sporulation period was higher than in growth phase, showing the evidence that leucine is more required for protein synthesis. This tendency has the evidence tht leucine is more required for protein synthesis. This tendency has the evidence that leucine is more required for protein synthesis. This tendency has been also supported from the result of Km values of leucine uptake in two stages of yeast. Leucine uptake was inhibited by 2,4-dinitrophenol in two stages of yeast. This means that leucine transport system is associated with energy dependent in both stages. The contents of all amino acid in growth phase cells were higher than those of sporulation stge cells, and those of methionine and tyrosine were showed in trace during the sporulation stage. In contrast, the content of glutamic acid in sporulation stage was compared with those of other amino acids.

• Journal of Mechanical Science and Technology
• /
• v.19 no.5
• /
• pp.1087-1094
• /
• 2005

This paper presents the validity and limitation of the thin-shell approach for the analysis of elastic wave propagation in a pipe with nonviscous liquid. The phase velocities calculated by the thin-shell approach were compared with those calculated by the thick-cylinder approach. In contrast to the case of the empty pipe, where only two modes were obtained and the first mode was calculated in a limited frequency range, the results for the liquid-filled pipe exhibits a large number of modes due to the large number of branches of the apparent liquid mass. Several of the lowest modes of the waves in a liquid-filled pipe were calculated for various pipe thicknesses in a low frequency range. The thin-shell approach was valid for a reasonable range of pipe thicknesses.

• Korean Journal of Animal Reproduction
• /
• v.10 no.1
• /
• pp.42-48
• /
• 1986

These experiments were carried out to develop new techniques identifying XX-bearing embryos prior to implantation by immunological method. Antiserum to histocompatibility-Y(H-Y) antigen was prepared in adult SD(sprague-dawley) female rat by repeated immunization of newbone testis supernatant from males of the same strain. ELISA test was used to identify the H-Y antibody of antiserum. Total 124 mouse embryos (8-cell stage) were treated with H-Y antiserum and complement in BSA free Ho, pp. and Pitt's medium and cultured under the gas phase of 5% CO2 in air at 37$^{\circ}C$ for 24 to 48 hrs. The morphological characteristics of embryos treated were observed under the phase-contrast micro scope. The results obtained in these experiments were summarized as follows: 1. Optimal Density of H-Y antibody were a, pp.ared to be 0.27-0.47 by ELISA test. 2. Of total 124 embryos treated with H-Y antiserum and complement 69(55.6%) embryos developed to blastocyst and 55(44.4%) destroyed or arrested.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.21-27
• /
• 2003

This paper proposes a new model of the pressure drop for more accurate description of oscillating flow through regenerator under pulsating pressure conditions in contrast to an existing model based on steady flow. For the universal uses of the oscillating flow model, non-dimensional parameters, which consist of Reynolds number, Valensi number gas domain length ratio, oscillating flow friction factor and phase angle of pressure drop, are derived from the capillary tube model of the regenerator. Two correlation equations of the model are obtained from the experiments for the twill square screen regenerators under various operating frequencies and inlet mass flow rates. The oscillating friction factor is a function of only the Reynolds number and the phase angle of pressure drop is a function of the Valensi number and the gas domain length ratio. Experiment is also performed to examine the effects of the shape of screens.

• Corrosion Science and Technology
• /
• v.5 no.1
• /
• pp.23-26
• /
• 2006

Recent development of ultrafine grained (UFG) low carbon steels by using equal channel angular pressing (ECAP) and their room temperature tensile properties are reviewed, focusing on the strategies overcoming their inherent mechanical drawbacks. In addition to ferrite grain refinement, when proper post heat treatments are imposed, carbon atom dissolution from pearlitic cementite during ECAP can be utilized for microstructural modification such as uniform distribution of nano-sized cementite particles or microalloying element carbides inside UFG ferrite grains and fabrication of UFG ferrite/martensite dual phase steel. The utilization of nano-sized particles is effective on improving thermal stability of UFG low carbon ferrite/pearlite steel but less effective on improving its tensile properties. By contrast, UFG ferrite/martensite dual phase steel exhibits an excellent combination of ultrahigh strength, large uniform elongation and extensive strain hardenability.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.891-892
• /
• 2006

To test the correlation between grain shape and growth behavior we prepared WC-TiC-Co samples with rounded (Ti, W)C grains and faceted WC grains. The growth of rounded (Ti, W)C grains was normal. In contrast, the growth of faceted WC grains was abnormal or suppressed depending on the initial size of WC particles. These observations were explained using growth theories of crystals in a liquid and were also confirmed by a simulation using their growth equations. The present results thus demonstrate that the growth behavior of carbide grains in a liquid is governed only by their shape, irrespective of the presence of another phase.