• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.48-53
• /
• 2007

A project manager of construction project must analyze risks which might happen during the construction phase and prepare a restoration method against the risks in order to get the successful project's accomplishment. Insurance is a representative kind of risk transfer method and an institution which prevents damages of the insured. In spite of increasing the ratio of construction insurance policy in the construction industry, project managers have regarded the insurance as a formal action in the budget through insurance companies' guides. These aspects make them not be able to valuate the reasonableness of premium rate and the real amount of the risks. This thesis is to present an improved method of construction insurance contract. Firstly, the status of the current construction insurance system have been anlyzed and the problems have been deducted. Secondly the development direction against the problems is presented in the research. Lastly, the procedure model is proposed for acquiring the resonable premium rate of insurance.

• Journal of Arbitration Studies
• /
• v.18 no.2
• /
• pp.79-102
• /
• 2008

When several parties are involved in a dispute, it is usually considered desirable that the issues should be dealt with in the same proceedings, rather than in a series of separate proceedings. This saves time and money. It avoids the possibility of conflicting decisions on the same issues of law and fact, since all issues are determined by the same tribunal at the same time. Where there is a multi-party arbitration, it may be because there are several parties to one contract, or it may be because there are several contracts with different parties that have a bearing on the matters in dispute. In international trade and commerce, for individuals, corporations or state agencies to join together in a joint venture or consortium or in some other legal relationship of this kind, in order to enter into a contract with another party or parties, where such a contract contains an arbitration clause and a dispute arises, the members of the consortium or joint venture may decided that they would each like to appoint an arbitrator. A different problem arises where there are several contracts with different parties, each of which has a bearing on the issues in dispute. A major international construction project is likely to involve not only the employer and the main contractor, but also a host of special suppliers and sub-contractors. Each of them will be operating under different contracts often with different choice of law and arbitration clauses. The appointment of the arbitrator or the composition of the arbitral tribunal should be in accordance with the agreement of the parties. The parties have to be equally treated in the constituting of the arbitral tribunal and the arbitral proceedings. However, the right of the parties to nominate a member of the arbitral tribunal could be taken away from them, if they are subject to the restrictions by means of the law of the country where the arbitration is taking place. That is, multiple parties jointly should nominate one arbitrator, where there they have to exercise their substantive right in common, or one of them exert his substantive right, then it has an effect on another parties, or they, whether as claimant or as respondent, get the same or similar treatment in the arbitral procedure. Therefore it is necessary to intend to settle multi-party disputes quickly and efficiently.

• Journal of Arbitration Studies
• /
• v.17 no.1
• /
• pp.97-116
• /
• 2007

This article has the objective of studying French ADR System which is unique and peculiar in the world. Nowadays commercial conflict is resolved by litigation or ADR. ADR plays an important part in resolving commercial conflict in the US, England, Germany, Japan and France. Untill now, only French ADR System has not been studied at all in Korea. So we can safely say that it is necessary to research into French ADR System in order to improve Korea's ADR System. This study is composed of Introduction, Concept of French ADR System, Actual Circumstances of French ADR System and Conclusion. The Fundamental system of French ADR is the law of February 8, 1995 that is made up of 82 articles. Among these articles, Judical Conciliation and Mediation are the most important. It is universally admitted by most of legal scholars that judicial conciliation and mediation have the character of contract. Because mutual consent is necessary in order for judicial conciliation and mediation to be effective. French system of judicial conciliation and mediation is provided in French Civil Procedure Law. Judicial conciliation plays an important role in Labor Law and Family Law. In the early part of litigation, the attempt of consiliation can be made very frequently in France. Successful conciliation and mediation are induced into negociation between parties. Arbitration has its long history in Europe. In the medieval times, Western European merchant began to use Arbitration System. After the medieval times had passed, Arbitration System took root in France. But Arbitration System has not so developed in France. On the other hand, Arbitration System has developed to a considerable degree in the US in spite of its short history. It is due to the fact that the French dislike to have recourse to litigation as compared with the Americans. However Arbitration can resolve securities conflict through various institutions in France, which is very similar to the concerned US phenomenon.

• Journal of Arbitration Studies
• /
• v.8 no.1
• /
• pp.221-241
• /
• 1998

Though the arbitration agreement is a means to resolve disputes autonomously in essence, the Principle of Parties Autonomy and the Principle of Free Contracting can not be applied infinitely without any limitations but subject to the Public Policy and the Compulsory Provisions as established by an interested country. Such principle of law is applied to international arbitration agreements as well, but their validity should be determined by different standards from those in domestic arbitration agreements, in consideration of their internationality. The essential effect of arbitration agreement is to exclude from the jurisdiction of State courts. Depending upon definition of the legal nature of arbitration agreement, the range and contents of the effect of such agreement will vary. Whether State courts can intervene in claims related to Compulsory Provisions is an issue at the level of legislation policy which can not be easily concluded. But, the applicability of Compulsory Provisions can not serve as an imperative ground to deny the eligibility of claims for arbitration, so far as such claims can be disposed of by the parties. On the other hand, it is reasonable to view the arbitration agreement as a substantive contract in its legal nature enabling the authority for dispute resolution to be delegated to arbitrator, so that the Principle of Parties Autonomy can be widely applied throughout the arbitration procedure as well as with other legal acts on private laws. With this, the parties can enjoy an arbitration award appropriate for characteristics of a specific arbitration agreement, thus resulting in facilitating the use of arbitration procedure for international trade activities. To conclude, the Public Policy and the Compulsory Provisions as limitations on arbitration agreement should be applied to such an extent that they can protect States basic moral faith and social order.

• Journal of Arbitration Studies
• /
• v.17 no.2
• /
• pp.3-21
• /
• 2007

Arbitration is a private and contractual means of dispute resolution. As a creature of contract, any particular arbitration owes its existence-and attendant limitations-to an arbitral agreement. This means that, in practice, the parties select their own judges, forum, and rules. By agreeing to arbitration, parties hope to achieve several goals. And arbitration has proven to be quicker, cheaper, and more predictable than litigation as a means of resolving many types of claims. As a primary method of conflict resolution, it is now worthwhile to consider carefully any procedural mechanism designed to promote the central aims of this alternative to litigation. It is helpful to frame any particular analysis according to (1) the type of decision for which preclusive effect is sought (arbitral award or court judgment) and (2) the type of subsequent proceeding in which preclusion is sought (an arbitration or a litigation). Res judicata may well bar litigation of that claim between the parties, but non-parties (affiliates or individuals) will not benefit from this bar unless the arbitral tribunal makes findings sufficient to satisfy the elements of collateral estoppel. The final permutation to be considered involves an arbitral award's preclusive effect on a subsequent arbitration. Whether a prior court decision should preclude issues or claims in a subsequent arbitration presents the easiest case for analysis. It is the easiest primarily because there is generally little room to debate whether adequate procedures were followed in a litigation. That is, one can safely assume that the rules of evidence and the rules of civil procedure were followed and that formal records sufficiently memorialize both the proceeding itself and the ultimate decision. Procedural regularity is mentioned not necessarily because it is an analytic tool, but because so many jurists and scholars see it as an impediment to the application of preclusionary doctrines.

• Journal of Arbitration Studies
• /
• v.23 no.1
• /
• pp.55-84
• /
• 2013

There should be an arbitration agreement between concerned parties in order to resolve a dispute through arbitration. The arbitration procedures, including the selection of the arbitrator and the adjudicative rights of the arbitrator, are based on the arbitration agreement. In other words, the arbitration procedure and adjudication can be carried out within the boundaries of the arbitration agreement. Traditionally, the Doctrine of Separability of the arbitration agreement has been acknowledged in order to emphasize its importance and to clearly separate it from the contract. Today, when the Doctrine of Separability of the arbitration agreement is well established, overemphasizing this separability could hamper its effectiveness and the autonomy of the parties. Moreover, arbitration agreements in the past were required to be written, clarifying the existence of the agreement and determining the scope of its validity. Further, an arbitration agreement was considered as narrowly as possible. However, since arbitration has become a generalized resolution for disputes, the formal or content requirements should be reconsidered. In terms of validity, the subjective and objective scope should necessarily be extended as a means to resolve disputes related to an arbitration agreement and reduce the resolution cost and duration. Under this perspective, the arbitration theory should now focus on arbitration agreements rather than the place of arbitration. We should break from the nationalistic view, which understands that the arbitration system is a part of the national legal system and that arbitration is allowed solely by permission of the nation. Instead, we should extensively reinterpret the subject of arbitration agreement and its range of effects so that disputes can be resolved between the concerned parties under a single procedure and norm, a necessary step forward. Moreover, in spite of the positive contribution and role of the New York Convention toward the establishment and development of the international arbitration system, there should be an effort to overcome its deterioration. As mentioned in the recommendations regarding the interpretation of the arbitration agreement in the New York Convention in 2006, we should begin by striving to match the Convention as a means of interpretation with the changes of the twenty-first century. Ultimately, we should meet the demands of the new era through amendments to the Convention.

• Journal of Arbitration Studies
• /
• v.31 no.3
• /
• pp.3-23
• /
• 2021

England is a significant base for international trade in Europe, and dispute resolution through arbitration is active. Therefore, due to the geographical relationship with the European continent, the settlement of trade transactions and disputes with European countries is one of the most essential tasks. In this regard, arbitration procedures in England have been actively used for a long time. In England, dispute resolution methods through arbitration have been developed centered on merchant groups such as guilds from the 16th century and have been actively used until today. However, the arbitration procedure also had the characteristics of the common law because there was no legislation related to arbitration. Therefore, arbitration based on common law was carried out until the first half of the 19th century. In the 'Arbitration Act 1889', two types of arbitration systems, 'common law arbitration' and 'statutory arbitration' coexisted. However, in the arbitration procedure, according to the newly enacted 'Arbitration Act 1889', the arbitration agreement was binding from the time the arbitration agreement was reached. There was a way to select an arbitrator even if it was not explicitly stipulated in the arbitration agreement, and the arbitration award was quickly enforced. Arbitration under contract was preferred over common law arbitration, where withdrawal and revocation of awards were possible. However, in response to these provisions, the England courts considered the arbitration system to deprive the courts of jurisdiction, while a strengthened judicial review of arbitration procedures was done. In particular, England unified the arbitration-related laws, which had been scattered for a long time, adopted the model law, and enacted the 'Arbitration Act 1996'. Under the recognition and enforcement of arbitral awards in 'Arbitration Act 1996', Section 66 deals with the recognition and enforcement of arbitral awards and foreign arbitral awards. Section 2 of the 'Arbitration Act 1950' is inherited and used as it is. Second, it deals with the execution of arbitral awards under the New York Convention: Article 100 (New York Convention), Section 101 (Approval and Enforcement of Awards), Section 102 (Evidence Presented by a Party Seeking Recognition and Enforcement), and Section 103 (Provides Matters Concerning Rejection Recognition and Enforcement).

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.2
• /
• pp.107-116
• /
• 2016

Premature babies of less than 37 weeks gestation might require oxygen therapy as an integral part of treatment and respiratory support. Because of their under-developed lungs, these so-called "preemies" might contract respiratory distress syndrome (RDS). To treat RDS, neonatal oxygen therapy is administered, where controlled oxygen gas is measured as a fraction of inspired oxygen ($FiO_2$). However, exposure to high oxygen content during long treatment could cause oxygen intoxication, which might cause permanent blindness due to retinopathy of prematurity (ROP), whereas insufficient oxygen exposure could cause severe hypoxia. A doctor would use oxygen saturation ($SpO_2$) data and prescribe a dose of $FiO_2$ to maintain $SpO_2$ within a suitable range. One objective is to maintain $SpO_2$ within the acceptable range using $FiO_2$ that is as low as possible. Adjustment of $FiO_2$ would normally be done by nurses every 15 to 30 minutes, which might not be safe in many situations. An error in $FiO_2$ adjustment during a manual procedure could be as large as +/- 2.5%. This paper presents a system that can determine an $FiO_2$ value suitable to the current $SpO_2$ and that automatically adjusts $FiO_2$ with an error clearance of +/- 0.25%.

• Journal of Advanced Marine Engineering and Technology
• /
• v.19 no.2
• /
• pp.1-9
• /
• 1995

The processing paper has devoted to the theory of the flow equations, the basic derivative procedure, the meaning of a valve flow coefficient $C_v$, the valve Reynolds R$R_{ev}$ and its application for liquid control valves, which applicable under the condition of a non-critical flow and the case of piping geometry factor $F_p$=1.0. However there is no information on the effects of fittings, a critical flow and the flow resistance coefficient of a valve equivalent to that of pipe which is conveniently used in the piping design. Since the piping systems of plants or ships generally contain various fittings such as expanders and reducers due to different size between pipes and valves and there may occur a critical flow, that a mass flowrate is maintained to be constant, due to the pressure drop in a piping when a liquid is initially maintainder ar a saturated temperature or at nearby corresponding to upstream pressure, system designer should have a knowledge of the effect to flow due to fittings and the critical flow phenomenon of a liquid. This study is performed to inform system designers with the critical flow phenomenon of a liquid, a valve resistance coefficient, a valve geometry factor and their applications.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.16 no.1
• /
• pp.72-80
• /
• 2016

Re-auction happens when a bid winner defaults on the payment without making second in-line purchase declaration even after determining sales permission. This is a process of selling under the court's authority. Re-auctioning contract price of real estate is largely influenced by the real estate business, real estate value, and the number of bidders. This paper is designed to establish a statistical model that deals with the number of bidders participating especially in apartment re-auctioning. For these, diverse factors are taken into consideration, including ratio of minimum sales value from the point of selling to re-auctioning, number of bidders at the time of selling, investment value of the real estate, and so forth. As an attempt to consider ambiguous and vague factors, this paper presents a comparatively vague concept of real estate and bidders as trapezoid fuzzy number. Two different methods based on the least squares estimation are applied to fuzzy regression model in this paper. The first method is the estimating method applying substitution after obtaining the estimators of regression coefficients, and the other method is to estimate directly from the estimating procedure without substitution. These methods are provided in application for re-auction data, and appropriate performance measure is also provided to compare the accuracies.