• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12A
• /
• pp.2019-2026
• /
• 2001

In this paper, we proposed the car license plate extraction and recognition algorithm using both the dynamical thresholding method and the kohonen algorithm. In general, the areas of car license plate in the car images have distinguishing characteristics, such as the differences in intensity between the areas of characters and the background of the plates, the fixed ratio of width to height of the plates, and the higher dynamical thresholded density rate 7han the other areas, etc. Taking advantage of the characteristics, the thresholded images were created from the original images, and also the density rates were computed. A candidate area was selected, whose density rate was corresponding to the properties of the car license plate obtained from the car license plate. The contour tracking method by utilizing the Kohonen algorithm was applied to extract the specific area which included characters and numbers from an extracted plate area. The characters and numbers of the license place were recognized by using Kohonen algorithm. Kohonen algorithm was very effective o? suppressing noises scattered around the contour. In this study, 80 car images were tested. The result indicate that we proposed is superior in performance.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.2
• /
• pp.55-60
• /
• 2011

In this paper, we propose a new method for extracting muscles from lumbar images. The proposed method sets areas without distortions with field expert's assistance as areas of measuring interest and removing noises from initial ultrasonic videos. Then, the method emphasizes the brightness contrast with Ends-in search stretching algorithm and separate thoracic vertebra from subcutaneous fat area using morphological characteristics. 4-directions contour tracing algorithm is applied to extract the bottom of subcutaneous fat area. Extracting thoracic vertebra area requires noise removal and morphological characteristics as well among candidate areas obtained by controlling min-max brightness. The thickness of muscles is then defined as the length between subcutaneous fat area and extracted thoracic vertebra. The experiment which consists of 368 image analysis verifies that the proposed method is more effective in measuring the thickness of muscles than before.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.135-142
• /
• 2013

Contour detection is important for many computer vision applications, such as shape discrimination and object recognition. In many cases, local luminance changes turn out to be stronger in textured areas than on object contours. Therefore, local edge features, which only look at a small neighborhood of each pixel, cannot be reliable indicators of the presence of a contour, and some global analysis is needed. The novelty of this operator is that dilation is limited to Deluanary triangular. An efficient implementation is presented. The grouping algorithm is then embedded in a multi-threshold contour detector. At each threshold level, small groups of edges are removed, and contours are completed by means of a generalized reconstruction from markers. Both qualitative and quantitative comparison with existing approaches prove the superiority of the proposed contour detector in terms of larger amount of suppressed texture and more effective detection of low-contrast contour.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.36
• /
• pp.41-47
• /
• 1995

This study present a systematic and more economical anthropometric technique to acquire 3-D anthropometric data by the use of moire interferometry, image processing and computer vision techniques. An experiment was performed to measure in anthopometric variables (head and face), such as head length, head breath, length of ear to top of head, contained face areas, etc. We took fourty-five subjects with wide range of ages(18 years to 33 years old). The face area was calculated based on contour information. The results were then compared with plaster bandage methods. It turned out that the proposed method had 90.85% consistancy.

• Korean Journal of Remote Sensing
• /
• v.5 no.2
• /
• pp.123-131
• /
• 1989

The inventory maps of landslide deposits show where landsliding has occured in the past, and serve as a general guide to slope stability. Isopleth maps derived from those inventory maps, generalized and quantify the areal distribution of landslide deposits in contour form. Isopleth maps can provide an economical means for the recognition of landslide activity and assessing the degree of landslide hazard in a large area, especially rural areas. Isopleth maps of Bonggye area, where the degree of landslide hamedial efforts during the period of 1954-1971.

• Water Engineering Research
• /
• v.2 no.4
• /
• pp.269-276
• /
• 2001

The project concentrates on an hydrological analysis. The analysis consists of rainfall, infiltration, Determination of runoff and sediment yield. The risque of erosion and the control measures are related to the slopes and land use. Therefore the first approach to erosion must be correct land use based on land classification. Basically there are two types of mechanical protection works; Drainage and Storage. Realization of a drainage system will be very costly and therefore temporary storage is preferred. For farmland in flat areas hardly any measures are needed. For farmland on slopes temporary storage can be effected by applying tillage with ridges within contour bunds. Along roads infiltration pits should be constructed and in areas with houses, the solution to avoid runoff will be water harvesting.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.839-844
• /
• 2003

This paper presents a method to segment wafer ID marks on poor quality images under uncontrolled lighting conditions of the semiconductor process. The active multiple templates matching method is suggested to search ID areas on wafers and segment them into meaningful regions and it would have been impossible to recognize characters using general OCR algorithms. This active template model is designed by applying a snake model that is used for active contour tracking. Active multiple template model searches character areas and segments them into single characters optimally, tracking each character that can vary in a flexible manner according to string configurations. Applying active multiple templates, the optimization of the snake energy is done using Greedy algorithm, to maximize its efficiency by automatically controlling each template gap. These vary according to the configuration of character string. Experimental results using wafer images from real FA environment are presented.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.2 s.40
• /
• pp.59-66
• /
• 2007

The digital working environment and its related technology have been rapidly expanding. In the surveying field, we have changed from using optical film cameras and plotters to digital cameras, multi sensors like GPS/INS etc,. The old analog work flow is replaced by a new digital work flow. Accurate data of the land is used in various fields, efficient utilization and management of land, urban planning, disaster and environment management. It is important because it is an essential infrastructure. For this study, LiDAR surveying was used to get points clouds in the study area. It has a high vegetation penetrating advantage and we used a digital process from planning to the final products. Contour lines were made from LiDAR data and compared with national digital base maps (scale 1/1,000 and 1/5,000). As a result, the accuracy and the economical efficiency were evaluated. The accuracy of LiDAR contour data was average $0.089m{\pm}0.062\;m$ and showed high ground detail in complex areas. Compared with 1/1,000 scale contour line production when surveying an area over $100\;km^2$, approximately 48% of the cost was reduced. Therefore we prepose LiDAR surveying as an alternative to modify and update national base maps.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.3
• /
• pp.179-187
• /
• 2008

In this paper, we apply a set of algorithms to classily normal and cancer nucleus from uterine cervical pap-smear images. First, we use lightening compensation algorithm to restore color images that have defamation through the process of obtaining $1{\times}400$ microscope magnification. Then, we remove the background from images with the histogram distributions of RGB regions. We extract nucleus areas from candidates by applying histogram brightness, Kapur method, and our own 8-direction contour tracing algorithm. Various binarization, cumulative entropy, masking algorithms are used in that process. Then, we are able to recognize normal and cancer nucleus from those areas by using three morphological features - directional information, the size of nucleus, and area ratio - with fuzzy membership functions and deciding rules we devised. The experimental result shows our method has low false recognition rate.

• Journal of KIISE:Software and Applications
• /
• v.31 no.5
• /
• pp.605-616
• /
• 2004

A new practical implementation of a facial verification system using cumulative histogram of surface curvatures for the local and contour line areas is proposed, in this paper. The approach works by finding the nose tip that has a protrusion shape on the face. In feature recognition of 3D face images, one has to take into consideration the orientated frontal posture to normalize after extracting face area from the original image. The feature vectors are extracted by using the cumulative histogram which is calculated from the curvature of surface for the contour line areas: 20, 30 and 40, and nose, mouth and eyes regions, which has depth and surface characteristic information. The L1 measure for comparing two feature vectors were used, because it was simple and robust. In the experimental results, the maximum curvature achieved recognition rate of 96% among the proposed methods.