• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.1
• /
• pp.57-66
• /
• 2016

Aerosol optical thickness (AOT) and ${\AA}ngstr{\ddot{o}}m$ exponents were monitored at the KIU site ($N35.91^{\circ}$, $E128.80^{\circ}$) during the continuous observation period of 5 November 2010~19 March 2013 using a Microtops-II handheld munti-wavelenth radiometer. Comparisons of AOT values from the Microtops-II with the Sun-sky radiometer data from the Aerosol Robotic Network (AERONET) showed very good agreements: correlation coefficients are lies between 0.98 and 0.99, slopes range from 0.98 to 1.01, and intercepts are smaller than 0.008 at five wavelengths (380 nm, 440 nm, 500 nm, 675 nm, 870 nm). During the observation period, the Microtops-II AOT and ${\AA}ngstr{\ddot{o}}m$ exponents are ${\tau}_{500}=0.560{\pm}0.351$, ${\alpha}_{500-870}=1.135{\pm}0.445$. Fine mode aerosols appear to dominate in the study region with significant contributions from small particles.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.6
• /
• pp.606-611
• /
• 2014

The understanding of another's behavior is a fundamental cognitive ability for primates including humans. Recent neuro-physiological studies suggested that there is a direct matching algorithm from visual observation onto an individual's own motor repertories for interpreting cognitive ability. The mirror neurons are known as core regions and are handled as a functionality of intent recognition on the basis of imitative learning of an observed action which is acquired from visual-information of a goal-directed action. In this paper, we addressed previous works used to model the function and mechanisms of mirror neurons and proposed a computational model of a mirror neuron system which can be used in human-robot interaction environments. The major focus of the computation model is the reproduction of an individual's motor repertory with different embodiments. The model's aim is the design of a continuous process which combines sensory evidence, prior task knowledge and a goal-directed matching of action observation and execution. We also propose a biologically inspired plausible equation model.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.127.1-127.1
• /
• 2012

The 40.8-MHz VHF coherent scatter ionospheric radar, located in South Korea (Gyeryong, $36.18^{\circ}N$, $127.14^{\circ}E$), has been operating since December 2009 to investigate ionosphere E- and F-region field-aligned irregularities (FAIs) of mid-latitude. During the observation, we found E- and F-region FAIs appeared frequently: continuous echoes during the post-sunrise period and Quasi-Periodic (QP) echoes at nighttime for E region ; strong post-sunset and pre-sunrise FAIs for F region. The characteristics of E- and F-region FAIs are presented in terms of seasonal and local time variations of occurrence during December 2009 to August 2012. In addition, to investigate the correlation with geomagnetic activity to FAIs occurrence, we compared K-index variations to local time occurrence. It is worth to note our occurrence result since long term observation over several years in the mid-latitude has not yet been carried out.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.4
• /
• pp.263-266
• /
• 1998

Flowergenic callus was induced from the ovary surface of Allium fistulosum L. cultured on MS medium containing 0.5mg/L NAA and 0.5mg/L BA or 0.5mg/L kinetin. After 3-4 weeks of culture, the flower buds were developed from flowergenic callus. The continuous production of flowergenic callus was proliferated, when subcultured on the medium containing 0.5mg/L NAA and 0.5mg/L kinetin. However, frequency of flower bud formation from flowergenic callus was decreased as the subculture was repeated. Histological observation reveals that the developmental pattern of flower bud from flowergenic callus was closely similar to that of natural flowers.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.87-88
• /
• 2022

For an earthquake-safe urban environment, the Republic of Korea conducts seismic performance evaluation in accordance with laws and guidelines to assign safety ratings and implement necessary management measures such as repairs and reinforcements. In the seismic performance evaluation result, structures lacking in preparation for earthquakes are prioritized and classified into measures such as repair, reinforcement, or careful observation to respond to physical risks such as earthquakes. Such repair and reinforcement work is not a one-time thing, but it is necessary to further enhance the effect through continuous follow-up observation. In this study, the location of the vertical and horizontal displacement measuring part of the construction part is displayed so that the post-construction status of the reinforcement construction part can be visually checked by identifying the problems in the process of post-monitoring in 2022 for the maintenance and reinforcement work of local governments' public facilities carried out in 2021. We propose a plan to institutionalize the installation of, inspection tools, and crack gauges at certain locations in the construction department, and to have facility managers periodically inspect and manage them with a smartphone program or the 'Facility Autonomous Safety Inspection' app.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.5
• /
• pp.349-357
• /
• 2003

Several microvascular anastomotic techniques have been described with methodical effectiveness, patency rates, healing state of microscopic findings. This experimental study presents the comparison of three types of arterial microvascular anastomotic techniques: end-to-end(ETE) anastomosis, end-in-end(EIE) anastomosis, and continuous technique. Sixty male Sprague-Dawley rats, 60 femoral arteries were used for this study. Twenty rats per each technique were used and sacrificed at post-operation 1 day, 3 days, a week, 2 weeks for scanning electromicroscopic findings. The patency was monitored by miniDoppler throughout total experimental periods. The anastomotic time on each method was measured to compare the technical effectiveness. The final results were as follows: 1. The anastomotic time for the end-in-end technique was significantly shorter than another techniques. The average time for each technique was measured as 15 minutes on EIE technique, 20 minutes on continuous technique and 25 minutes on ETE technique. 2. The patency rate for the end-in-end technique at 2 weeks also was superior to another techniques. The patency rate for each technique was demonstrated as 90 % on EIE technique, 85 % on ETE technique and 80 % on continuous technique. 3. The scanning electromicroscopic findings on healing condition of vessel endothelium during the observation period showed that the end results of EIE technique, ETE technique and continuous technique in sequence were good. The end-in-end technique proved to be the superior with regard to anastomotic time and patency rate when compared to end-to-end technuqe, so EIE techniqe might be well available for the case of large discrepancy of vessel size. The patency rate, microscopic healing findings in continuous technique were seen as the lowest level among the three anastomotic techniques, therefore the application of continuous technique was recommended only on the inevitable case.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.1
• /
• pp.74-80
• /
• 1999

Recently, manufacturing work has been transformed to small scale production form with various types to act up to user's expectation from mass production with a little items required in the past. Then FMS using NC type machinaries has been applied actively also in domestic manufacturing line to meet thus tendency, but there are many machining troubles occured during work process not be settled yet. Nowdays high efficiently has been required no less than high precision in grinding work for the improvement of productivity. In this study, to represent more advance FMS can be adapted to thus situation In-process type monitoring method using AE and Current sensors is suggested to investigate the machining condition in grinding process. As results form this experimental study, it is recognized well that grinding conditions and dressing point of in time cab be estimated effectively using monitoring method suggested. Furthermore, surface shape of grinding wheel on voluntary point of in time can be predicted indirectly through the observation and comparison of AE signal waveform obtained as performance of continuous dressing work.

• Journal of Ecology and Environment
• /
• v.31 no.1
• /
• pp.9-15
• /
• 2008

Growth and reproduction of Palaemon serrifer were described and analyzed in a population inhabiting tide pools in warm temperate waters in Korea. The water temperature varied greatly in the tide pools, ranging from 8$^{\circ}C$ to 27.8$^{\circ}C$ Population structure and growth were investigated using size frequency distribution data collected from January to December 2003. Sex ratios fluctuated, but were almost equal during the breeding period. Growth was continuous and size increased gradually throughout the year. Adult females were larger and grew faster than males. von Bertalanffy growth parameters for a one-year sample of females and males were estimated as $L_{i\ddot{A}}$ = 11.32, K = 0.311, $t_0$ = -0.4115 and $L_{i\ddot{A}}$ = 8.36, K = 0.228, $t_0$ = -0.9693 respectively. Breeding was seasonal, starting in May, peaking in August, and finishing by the end of August. The species showed continuous production of successive broods. Laboratory observation showed that females with embryos near hatching had ovaries filled with vitellogenic oocytes ready for spawning. The reproductive output (effort) of each female (mean number of eggs: $552{\sim}1355$) was not high. The mean embryo volume, $0.078mm^3$, is relatively small, indicative of low energy allocation to each embryo. Recruitment of juveniles was closely linked to the breeding period, beginning in September.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.2
• /
• pp.40-49
• /
• 2010

The Purpose of this paper is to weld a rapid palatal expander using a continuous wave Nd:YAG laser. The rapid palatal expander has become a useful treatment method for severe maxillary transverse deficiencies and posterior crossbites. Rapid maxillary expansion is a well-established method to correct transverse maxillary deficiency and arch length discrepancy. The major process parameters studied in the present laser welding experiment were the positions of focus, laser power and travel speed of laser beam. We measured the fusion zone size and its shape using an optical microscope for the observation of cross-sectional area and tension stress of a rapid palatal expander welded. Through the experimental investigation, the optimum speeds and power of laser without deficiencies of weld cross-sectional area were obtained.

• Journal of Welding and Joining
• /
• v.34 no.6
• /
• pp.69-74
• /
• 2016

Because the pure titanium has superior corrosion resistance and formability compared with different material, it is widely used as material of welded heat exchanger. When the welding of heat exchanger is carried out, certain area in which welding start and end are overlapped occurs. The humping of back bead is formed in the overlap area due to partial penetration. Thus in this study, the experiments were carried out by changing the length and wave shape of overlap area, and then the weldabiliay was evaluated through the observation of microstructure, the measurement of hardness and tensile-shear strength test in the overlap area. When overlap length was 9.8mm, humping bead was suppressed. The microstructure of overlap area coarsened and its hardness increased due to remelting. As a result of tensile-shear strength test in the overlap area according to applying the wave shape control, it was confirmed that the overlap area applied wave shape control had more excellent yield strength and ductility.