• Economic and Environmental Geology
• /
• v.43 no.2
• /
• pp.149-162
• /
• 2010

The most serious problem in oil stockpiles with artificial underground cavern is maintaining the stability of ground water system. In order to understand the ground water system around K-1 site, we determined the regional flow direction and level distribution of groundwater, and investigated the major geologic factors influencing their flow system. Reactivated surface along the contact between granite and gneiss, and fractures and faults along the long acidic dyke may contribute as important pathways for groundwater flow. Within K-1 site, groundwater level fluctuation is closely related to the rainfall events and injection from surface or influx water. In this project, the effect of groundwater pumping from the southern wells was examined. Based on equations relating water level drawdown to pumping rate at those wells, their pumped outflow of groundwater ranged from $80\;m^3$/day to less than $250\;m^3$/day. The modeling results with MODFLOW imply that the previous groundwater pumping at distance of 1.2 km may not affect the groundwater level variations of the K-1 site. However, continuous pumping work at quantity over $250\;m^3$/day in this area will be able to affect the groundwater system of the K-1 site, particularly along the acidic dyke.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2006.11a
• /
• pp.65-74
• /
• 2006

Modem drug discovery requires rapid pharmacokinetic evaluation of chemically diverse compounds for early candidate selection. This demands the development of analytical methods that offer high-throughput of samples. Naturally, liquid chromatography / tandem mass spectrometry (LC-MS/MS) is choice of the analytical method because of its superior sensitivity and selectivity. As a result of the short analysis time(typically 3-5min) by LC-MS/MS, sample preparation has become the rate- determining step in the whole analytical cycle. Consequently tremendous efforts are being made to speed up and automate this step. In a typical automated 96-well SPE(solid-phase extraction) procedure, plasma samples are transferred to the 96-well SPE plate, internal standard and aqueous buffer solutions are added and then vacuum is applied using the robotic liquid handling system. It takes only 20-90 min to process 96 samples by automated SPE and the analyst is physically occupied for only approximately 10 min. Recently, the ultra-high flow rate liquid chromatography (turbulent-flow chromatography)has sparked a huge interest for rapid and direct quantitation of drugs in plasma. There is no sample preparation except for sample aliquotting, internal standard addition and centrifugation. This type of analysis is achieved by using a small diameter column with a large particle size(30-5O ${\mu}$m) and a high flow rate, typically between 3-5 ml/min. Silica-based monolithic HPLC columns contain a novel chromatographic support in which the traditional particulate packing has been replaced with a single, continuous network (monolith) of pcrous silica. The main advantage of such a network is decreased backpressure due to macropores (2 ${\mu}$m) throughout the network. This allows high flow rates, and hence fast analyses that are unattainable with traditional particulate columns. The reduction of particle diameter in HPLC results in increased column efficiency. use of small particles (<2 urn), however, requires p.essu.es beyond the traditional 6,000 psi of conventional pumping devices. Instrumental development in recent years has resulted in pumping devices capable of handling the requirements of columns packed with small particles. The staggered parallel HPLC system consists of four fully independent binary HPLC pumps, a modified auto sampler, and a series of switching and selector valves all controlled by a single computer program. The system improves sample throughput without sacrificing chromatographic separation or data quality. Sample throughput can be increased nearly four-fold without requiring significant changes in current analytical procedures. The process of Bioanalytical Method Validation is required by the FDA to assess and verify the performance of a chronlatographic method prior to its application in sample analysis. The validation should address the selectivity, linearity, accuracy, precision and stability of the method. This presentation will provide all overview of the work required to accomplish a full validation and show how a chromatographic method is suitable for toxirokinetic sample analysis. A liquid chromatography/tandem mass spectrometry (LC-MS/MS) method developed to quantitate drug levels in dog plasma will be used as an example of tile process.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.249-257
• /
• 2007

The periodic square wave (PSW) model was successfully applied to the optimal design of a batch-storage network. The network structure can cover any type of batch production, distribution and inventory system, including recycle streams. Here we extend the coverage of the PSW model to multitasking semi-continuous processes as well as pure continuous and batch processes. In previous solutions obtained using the PSW model, the feedstock composition and product yield were treated as known constants. This constraint is relaxed in the present work, which treats the feedstock composition and product yield as free variables to be optimized. This modification makes it possible to deal with the pooling problem commonly encountered in oil refinery processes. Despite the greater complexity that arises when the feedstock composition and product yield are free variables, the PSW model still gives analytic lot sizing equations. The ability of the proposed method to determine the optimal plant design is demonstrated through the example of a high density polyethylene (HDPE) plant. Based on the analytical optimality results, we propose a practical process optimality measure that can be used for any kind of process. This measure facilitates direct comparison of the performance of multiple processes, and hence is a useful tool for diagnosing the status of process systems. The result that the cost of a process is proportional to the square root of average flow rate is similar to the well-known six-tenths factor rule in plant design.

• Journal of Korean Home Economics Education Association
• /
• v.1 no.1
• /
• pp.1-17
• /
• 1989

Present, we cannot expect the maximum studying effect in a home economics and the drill unit of secondary schools because of several problems. Such problems can be enumerated as follows. 1. The explaination of a making process in texts would be difficult for the students who have a poor understanding to grasp. 2. The much effort would be made due to teacher’s repeated exhibition, by which the progress of a text might be unreasonable. 3. The teachers unaccustomed to the drill might treat it carelessly and become to avoid it. 4. The skill to grasp a general work flow might be lack. Baseing on such problems, this researcher did using a medium of Video in teaching method of home economics. For this purpose, the quality of Video Tape would be important. Above all, we made out the script of Video Tape through advices of specialists in Video medium, majors in home economics, and the students teaching of home economics and the concerned persons, by which we recorded a gather skirt, as a finished goods, especially of the characteristics of each kind of a skirt. Next, we recorded and produced the total steps from a preparation of skirt-making to a finishing as using a V.T.R. shot technique. The Video would be screened and the supplemented explaination of a teacher would be added in a step of instruction. In the development of instruction, students would begin the making. The expected effects according to using Video Tape are as follows. 1. The making order of text would be exhibited by a model directly and the explaination of a narrator would be added concurrently, by which students would understand it easily as confirming each step. 2. All students can watch these steps owing to a close up, one of the V.T.R Techniques. Accordingly, the teacher’s efforts would be decreased and the proper progress of a text could be maintained because of no repeated exhibition of a teacher. 3. To the teachers unaccustomed to and interested in a drill, the medium would become a subsidiary means. 4. Study all steps of a making, students would become to understand the general flow of a work. Therefore, it might be possible to generalize another units of a making. However though this study was designed don a basis of such effects, the using effects based on only the existing study results, and was focused on the production of a medium. Because this research would be a teacher and there was noncooperation of secondary schools, it was impossible to experiment in schools, which was the prime limitation of this study. Therefore we should be experiment further for the continuous studying.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.9
• /
• pp.17-23
• /
• 2009

Interest in application of ultraviolet light technology for primary disinfection of potable water in drinking water treatment plants has increased significantly in recent years. The efficacy of disinfection processes in water purification systems is governed by several key factors, including reactor hydraulics, disinfectant chemistry, and microbial inactivation kinetics. The objective of this work was to develop a computational fluid dynamics(CFD) model to predict velocity fields, mass transport, chlorine decay, and microbial inactivation in a continuous flow reactor. The CFD model was also used to evaluate disinfection efficiency in alternative reactor designs. In a typical operation, water enters the inlet of a UV lamp and flows through the annular space between the quartz sleeve and the outside chamber wall. The irradiated water leaves through the outlet nozzle. In this paper, it describe the how to design optimal ultraviolet disinfection device for ground water and rainwater. To search the optimal design method, it was performed computer simulation with 3D-CFD discrete ordinates model and manufactured prototype. Using proposed design method, performed simulation and proved satisfied performance.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.5 no.1 s.12
• /
• pp.51-55
• /
• 2007

These days, hair design is recognized as a kind of molding arts which peform expression skill to create personal self as well as practical skill. Recently, the efforts to express hair design sublimating it to art works have continued. For these reasons, this study had purposes as follows; First, it developed creative and original design producing works to shape the flower image that was an important material of hair design. Second, it presented the possibility to express the field of hair design with art. In the flow of age, nature has provided design with unlimited creative motive. Flowers, among various materials, show the nature's change, combination and order and impose diverse symbolic meanings. Therefore, flowers are good materials to express the works. Through the process of decolorizing and dyeing with hair, five works of nature's fragrance, hope, reed flowers, windflower, magnolia blossom had been produced. The results of the process were as follows; First, the transformation of shape through the simple process taking the image of shaping flower as subject matter could be a motive of new hair design art. Second, if the various images of flowers were expressed as hair art with three-dimensional shape, it could be works with value of beauty. Through the process of this study, it was proved that nature could be endless subject matter for art. Therefore, with continuous studies, it can be motive of developing designs in producing work activities of many hair designers. In addition, academic development will be achieved through wide and diverse studies.

• Environmental Engineering Research
• /
• v.21 no.3
• /
• pp.291-296
• /
• 2016

Application of photocatalytic nanoparticles has been recently gaining an increased attention as air purifying material for sustainable urban development. The present work reports the photocatalytic removal of gaseous phase nitrogen oxides ($NO_x$) using $TiO_2$-coated zeolite to be applied as a filter media for the urban green infrastructure such as raingardens. The $TiO_2$-coated zeolite was synthesized by simple wet chemistry method and tested in a continuous-flow photo-reactor for its removal efficiency of $NO_x$ under different conditions of the weight percentage of $TiO_2$ coated on the zeolite, and gas retention time. The removal efficiency of $NO_x$ in general increased as the weight percentage of $TiO_2$ coated on the zeolite increased up to 15-20%. Greater than 90% of $NO_x$ was removed at a retention time of one minute using the $TiO_2$-coated zeolite ($TiO_2$ weight percentage = 20%). Overall, $TiO_2$-coated zeolite showed greater efficiency of $NO_x$ removal compared to $TiO_2$ powder probably by providing additional reaction sites from the porous structure of zeolite. It was presumed that the degradation of $NO_x$ is attributed to both the physical adsorption and photocatalytic oxidation that could simultaneously occur at the catalyst surface.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.6
• /
• pp.63-82
• /
• 2010

In spite of continuous road construction, traffic congestion has been worsening by radical vehicle's increase and development of surroundings near expressway. Thus, the necessity of traffic management and the needs of provision of traffic information to drivers are raised. In order to solve traffic problems, such as traffic congestion, search for optimal congestion management technique and evaluation of the effect of optimal solution should be examined prior to practice of optimal alternative. However, existing traffic analysis model and simulation programs as tools to search and evaluate optimal alternative are not sufficient to reflect traffic flow characteristics, domestic road and traffic conditions and to link up to Freeway Traffic Management Systems (FTMS). Hence, to use existing traffic analysis and simulation tools are followed by hard work to need a lot of time and cost. Therefore, in this research, Expressway TRaffic Analysis Model (ExTRAM) based on Freeway Traffic Management Systems (FTMS) was developed to apply it into congestion management easily.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.6
• /
• pp.2168-2187
• /
• 2021

The smart grid replaces the traditional power structure with information inventiveness that contributes to a new physical structure. In such a field, malicious information injection can potentially lead to extreme results. Incorrect, FDI attacks will never be identified by typical residual techniques for false data identification. Most of the work on the detection of FDI attacks is based on the linearized power system model DC and does not detect attacks from the AC model. Also, the overwhelming majority of current FDIA recognition approaches focus on FDIA, whilst significant injection location data cannot be achieved. Building on the continuous developments in deep learning, we propose a Deep Learning based Locational Detection technique to continuously recognize the specific areas of FDIA. In the development area solver gap happiness is a False Data Detector (FDD) that incorporates a Convolutional Neural Network (CNN). The FDD is established enough to catch the fake information. As a multi-label classifier, the following CNN is utilized to evaluate the irregularity and cooccurrence dependency of power flow calculations due to the possible attacks. There are no earlier statistical assumptions in the architecture proposed, as they are "model-free." It is also "cost-accommodating" since it does not alter the current FDD framework and it is only several microseconds on a household computer during the identification procedure. We have shown that ANN-MLP, SVM-RBF, and CNN can conduct locational detection under different noise and attack circumstances through broad experience in IEEE 14, 30, 57, and 118 bus systems. Moreover, the multi-name classification method used successfully improves the precision of the present identification.

• Journal of the Korean Society of Safety
• /
• v.37 no.5
• /
• pp.80-88
• /
• 2022

The Korean nuclear industry had developed the SPACE (Safety and Performance Analysis Code for nuclear power plants) code, which adopts a two-fluid, three-field model that is comprised of gas, continuous liquid and droplet fields and has the capability to simulate three-dimensional models. According to the revised law by the Nuclear Safety and Security Commission (NSSC) in Korea, the multiple failure accidents that must be considered for the accident management plan of a nuclear power plant was determined based on the lessons learned from the Fukushima accident. Generally, to improve the reliability of the calculation results of a safety analysis code, verification is required for the separate and integral effect experiments. Therefore, the goal of this work is to verify the calculation capability of the SPACE code for multiple failure accidents. For this purpose, an experiment was conducted to simulate a Control Element Drive Mechanism (CEDM) break with a safety injection failure using the ATLAS test facility, which is operated by Korea Atomic Energy Research Institute (KAERI). This experiment focused on the comparison between the experiment results and code calculation results to verify the performance of the SPACE code. The results of the overall system transient response using the SPACE code showed similar trends with the experimental results for parameters such as the system pressure, mass flow rate, and collapsed water level in component. In conclusion, it can be concluded that the SPACE code has sufficient capability to simulate a CEDM break with a safety injection failure accident.