• 한국안전학회지
• /
• 제25권5호
• /
• pp.54-61
• /
• 2010

The additional axial force of CWR(continuous welded rail) is occurred by structure-track interaction, in reverse, fixed supports of structure are applied the large load by that. Ratio of load which transferred on support through the bridge superstructure with one-side REJ by acceleration and braking load are stated in High-Speed Rail Design Criteria(2005). On the other hand the horizontal forces of support delivered to the load due to thermal loads has been no report about the criteria. Therefore, this study was performed the review of the reaction and displacement on support by structure-track interaction in a special bridge(composite brdiges, 45+55+55+45=200m) with REJ acting on the temperature load. As a result, because fixed support of a special bridge or a continuous bridge with REJ under the temperature load which is constant load has been acted the large lateral load by structure-track interaction, when determining the fixed bearing capacity of structure should be reflected in the results to secure the safety of structures was confirmed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권1호
• /
• pp.251-258
• /
• 2003

This study is to understand the characteristics of axial force behavior that operates to the part of continuous welded rail and to investigate the basic data for secure the structure's stability and retrofit of the track. To develop the FEM model that type of plate girder which is used in the domestic national railway among servicing railway type. It is to analyze the characteristics of axial force behavior according to equip of the expansion joint and support placing by using the axial force simulation in making the continuous welded rail. As the result of research on the parametric valuables through the analysis, it is investigated that 'FMFM type' is more efficient than the other support type. Also, it conclude that structures are having the expansion joint is the most safe condition.

• 한국산학기술학회논문지
• /
• 제15권4호
• /
• pp.2511-2518
• /
• 2014

레일 매립형 궤도시스템은 연속레일지지방식으로 하중분산 효과가 크며, 궤도부재에 발생하는 응력이 매우 작다. 다양한 장점을 갖고 있는 레일 매립형 궤도는 국내에 적용사례가 드물며, 고속 운행선 적용을 위한 연구는 매우 미흡하다. 본 논문에서는 고속운행선에서의 레일 매립형 궤도시스템 적용을 위한 기초연구로써, 실내시험을 통한 수직강성을 도출하였으며, 도출된 강성과 이론해석을 통해 최적단면을 도출하였다.

• Interaction and multiscale mechanics
• /
• 제5권1호
• /
• pp.1-12
• /
• 2012

Considerable longitudinal rail forces and displacements may develop in continuous welded rail (CWR) track on long-span bridges due to temperature variations. The track stability may be disturbed due to excessive relative displacements between the sleepers and ballast bed and the accompanied reduction in frictional resistance. For high-speed tracks, however, solving these problems by installing rail expansion devices in the track is not an attractive solution as these devices may cause a local disturbance of the vertical track stiffness and track geometry which will require intensive maintenance. With reference to temperature, two actions are considered by the bridge loading standards, the uniform variation in the rail and deck temperature and the temperature gradient in deck. Generally, the effect of temperature gradient has been disregarded in the interaction analysis. This paper mainly deals with the effect of temperature gradient on the track-bridge interaction with respect to the support reaction, rail stresses and stability. The study presented in this paper was not mentioned in the related codes so far.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1439-1449
• /
• 2007

The challenging aspect of CWR (continuous welded rail) is the additional axial forces in rails, mainly due to the thermal expansion of steel plate girder and rail itself. It has been found that these axial forces are proportional to girder length, total bridge length and bolt tightening forces. Also these forces are dependent to girder support conditions, types of bearings and their arrangements. With CWR, the authors' previous studies show that performance improvements like noise reduce, fatigue resistances and bearing durability increment can be expected. In addition to these effects, secondary effects due to the semi integral behavior between rail and bridge girder also can be expected. Special bearings which can reduce the absolute maximum axial forces have been developed, and applied to real 100m span bridge. The performance improvements were verified through site measurements and numerical analysis. The purpose of this study is to confirm the expected performance improvement aspects of steel plate girder bridges with CWR. To verify these aspects, girder stiffness changes, rail axial force changes, girder displacements and noise level were thoroughly measured and compared.

• 대한토목학회논문집
• /
• 제33권4호
• /
• pp.1303-1313
• /
• 2013

본 연구에서는 콘크리트 슬래브 궤도를 가지는 교량의 사용성 검토에 있어 단위 축하중, 단위 수직 단차, 단위 회전에 의해 발생되는 레일 지지점의 작용력에 대한 기준 값을 구하였다. 해석방법에 있어서는 레일이 탄성 스프링에 의해 연속적으로 지지되는 모델과 이산적으로 지지되는 모델이 이용되었다. 해석결과 얻어진 레일 지지점에서의 작용력은 콘크리트 궤도의 사용성 검토에서 참조되고 있는 DS 804 기준에 제시된 값과 비교되였으며, 그 결과는 잘 일치하였다. 또한, 레일 지지점의 간격과 체결장치의 강성이 레일 지지점에서의 작용력에 미치는 영향을 분석하였다.

• 한국강구조학회 논문집
• /
• 제19권4호
• /
• pp.345-355
• /
• 2007

장대레일은 동절기에 기온하강으로 인한 인장력을 발생하는데 중위온도 이하로 떨어져 파단이 발생되면 인장파단과 레일 간에 틈이 발생되며 이를 개구부라 한다. 이 개구부를 차륜이 통과하면 충격하중이 발생하며, 큰 손실이 발생할 수 있는 열차탈선이 발생할 수 있다. 본 연구에서는 동적해석을 위해 개구부를 가진 궤도와 차량의 상호작용을 고려한 동적해석모델을 제안하였다. 궤도와 차량의 선형시스템은 비선형 헤르찌안 접촉 스프링에 의해 연성되었으며 전체 궤도-차량 시스템 운동방정식을 정식화하였다. 그리고 개구부에서의 상호작용 현상을 고려하여 궤도 불균일부의 함수를 정의하고 개구부에서의 전후방 레일 사이의 개구량을 고려하였다. 비선형 방정식을 풀기위해 동적해석은 수정된 Newton-Raphson 방법에 근거한 Newmark - $\beta$ 방법에 의해 수행되었다. 그리고 차량속도, 개구량, 레일지지강성에 따른 매개변수를 조건으로 수치해석을 수행하였다.

• 한국소음진동공학회논문집
• /
• 제21권3호
• /
• pp.248-257
• /
• 2011

It was reported recently that railpads can be included as a continuous elastic support of the rail and the model was justified from experiments. In general, however, railpads are installed discretely on sleepers with a regular span. The effect of the discrete railpad was not clearly examined so far in such a high frequency range. In this paper, the effect of the railpads in track modelling for high frequencies is investigated by means of the finite element analysis. To do that, the railpads are regarded as 'a continuous elastic support' and 'a discrete elastic support' in this paper. The dispersion relations and decaying features are predicted and compared between the two models up to 80 kHz.

• 국제강구조저널
• /
• 제18권5호
• /
• pp.1617-1630
• /
• 2018

The crucial differences between conventional rail with split-type connectors and continuous welded rails are axial stress in the longitudinal direction and stability, as well as other issues generated under the influence of loading effects. Longitudinal stresses generated in continuously welded rails on railway bridges are strongly influenced by the nonlinear behavior of the supporting system comprising sleepers and ballasts. Thus, the track structure interaction cannot be neglected. The rail-support system mentioned above has properties of non-uniform material distribution and uncertainty of construction quality. The linear elastic hypothesis therefore cannot correctly evaluate the stress distribution within the rails. The aim of this study is to apply the nonlinear finite element method using the nonlinear coupling interface between the track and structural model and to illustrate the welded rail behavior under the loading effect and uncertain factors of the ballast. Numerical results of nonlinear finite analysis with a three-dimensional solid and frame element model are presented for a typical track-bridge system. A composite plate girder, modeled by solid and shell elements, is also analyzed to consider the behavior of the welded rail. The analysis result showed buckling under the independent calculations of load cases, including 'temperature change', 'bending of the supporting structure', and 'braking' of the railway vehicle. A parametric study of the load combination method and the loading sequence is also included in this analysis.

• 대한토목학회논문집
• /
• 제28권6D호
• /
• pp.895-904
• /
• 2008

장대레일은 동절기에 중위온도 이하로 떨어져 레일의 인장파단에 의해 개구부가 발생할 수 있다. 레일 파단을 미리 감지 못하는 경우에 개구부에서 동적하중에 의해서 차륜과 레일의 파손이 발생할 수 있으며, 열차주행 안전성이 감소될 수 있다. 본 연구에서는 개구부에서의 궤도와 차량의 동적거동 분석을 위해 레일 파단시 개구부에서의 궤도와 차량의 상호작용을 고려한 동적해석모델을 제안하였다. 궤도와 차량의 선형시스템은 비선형 헤르찌안 접촉 스프링에 의해 연성되었으며 전체 궤도-차량 시스템 운동방정식을 정식화하였다. 그리고 개구부에서의 상호작용 현상을 고려하여 궤도 불균일부의 함수를 정의하고 개구부에서의 전후방 레일 사이의 개구량을 고려하였다. 비선형 방정식을 풀기위해 동적해석은 $Newmark-{\beta}$ 방법에 의해 수행되었다. 그리고 차량속도, 개구량, 레일지지강성에 따른 매개변수에 대한 궤도-차량의 동적상호작용해석을 수행하였고 변수에 대한 영향을 분석하였다.