• 한국진공학회지
• /
• 제1권1호
• /
• pp.88-95
• /
• 1992

고분해능 저에너지 전자회절법(HRLEED)을 이용하여 O/W(110) 표면의 산소흡착층 의 정돈된 p(2 $\times$ 1) 구조가 보이는 2차원 연속적인 상전이계에관한 임계지수 연구를 보고 한다. 이 구조의 (1/2 0) 초격자 회절점의 세기 및 모양을 온도에 대한 함수로 구하여 Tc=708.765K에서 감수율 및 요동상관거리가 차수법칙(power law)에 따르는 발산을 보이는 것이 관측되었다. 이로부터 구한 임계지수는 $\beta$=0.19$\pm$0.05, $\Upsilon=1.48pm$0.34, v=1.23$\pm$0.27 그 리고 η=0.38$\pm$0.12이다. 이들 비보편성을 갖는 임계지수들은 이 계를 지배하는 입방이방성 (cubic anisotropy)를 갖는 2차원 XY 모델로 이해된다.

• 한국염색가공학회지
• /
• 제19권4호
• /
• pp.18-25
• /
• 2007

Kinetics and mechanism for alkaline hydrolysis of C. I. Disperse Green 9(G-9) of dinitrothiophene disperse dye were investigated. As soon as G-9 contacted with alkali, instant and continuous decreases of color strength of G-9 followed with increasing time. The hydrolysis rate of G-9 increased with increasing alkali, and it was found that alkali appeared first order dependence. The observed rate constants obtained from hydrolysis of various amount of dye were similar values, and calculation of initial rates showed that G-9 hydrolyzed by first order reaction for dye. Therefore it was confirmed that the overall reaction was second order, $SN_2$ of nucleophilic substitution reaction. Increasing temperature enhanced the hydrolysis of G-9. From the results of hydrolysis performed at various temperatures, it was obtained that activation energy(Ea) was 12.6 kcal/mole, enthalpy of reaction(${\triangle}H$) was 12.0 kcal/mole, and entropy of reaction(${\triangle}S$) was $29.8J/mol{\cdot}K$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.773-774
• /
• 2006

Nowadays, the global interests are concentrated on the preserving of the clean environment, and the diminishing of the dependence on the fossil energy, and among the possible alternative energies, the wind turbine generating system is considered to be the best suited to produce high efficiency energy, without affecting the natural environment. The permanent magnet generators were been used for the wind power generating, for long time, with continuous efforts to improve the generating efficiency. And the latest trend on it is to develop an AFPM(Axial Flux Permanent Magnet)type, which is composed in the structure of rotor and stator shaped in the disc forms, and the direction of the flux at the air gap runs in parallel to the shaft. This thesis is on the study concerning with the analysis of the characteristics of the 5 kW at 300rpm direct drive AFPM generator which is suitable for the small scale wind turbine generating system. In it, the Electro-magnetically Coreless AFPM was been analyzed, the prototype generators been made, concentrated on interpreting the characteristics of the power output, and verifying it through the theoretical study and practical tests.

• 한국컴퓨터정보학회논문지
• /
• 제15권2호
• /
• pp.127-134
• /
• 2010

연속 어휘 인식 확률 분포의 공유 방법에서는 사용될 모델 파라미터들의 초기 추정치를 생성하기 위한 각 문맥들에 대한 음소 데이터가 반드시 필요하지만 이들 음소 데이터에 대한 모델을 구성할 수 없는 단점으로 가우시안 모델의 정확성을 확보하지 못한다는 단점이 있다. 이를 개선하기 위하여 확률 분포의 혼합 가우시안 모델을 최적화하고, 음소 단위로 데이터를 탐색을 지원하는 형상 형성 시스템을 제안한다. 본 논문의 형상 형성 시스템은 확장 facet 분류를 이용하여 사용자에게 음소 단위의 형상 형성 정보를 제공하므로 가우시안 모델의 정확성을 제공한다. 본 논문에서 제안한 시스템을 적용한 결과 시스템 성능에서 어휘 종속 인식률은 98.31%, 어휘 독립 인식률은 97.63%의 인식률을 나타내었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.855-859
• /
• 2009

In this paper, we introduce the estimation method by Risk or SIL(Safety Integrity Level) for the criterion of safety assurance and summarize each application method and target. IEC 62278(EN 50126) which is international standard for the specification and verification of the railway system RAMS indicate a criterion of safety assurance. Especially, it recommend the safety verification by continuous verification as the order of requirement establishment, design, manufacture, installation, operation, and maintenance for the equipment not easy to quantify the operation environment. In this paper, we study the SIL requirement allocation method relating to internal new system development and existing system improvement by analysing SIL recommendations which were used to understand SIL for a train control equipment in 1990s in IRSE and theoretically their allocation background. This paper help the safety management of Korea train control system to develope the quantitative management procedure as international level by analyzing the SIL requirement allocation by operation agency and the right SIL verification procedure by manufacture and indicating the example to assure safety because it is necessary for improvement and localization for the Korea train control system having highly dependence on aboard technology.

• International Journal of CAD/CAM
• /
• 제8권1호
• /
• pp.1-10
• /
• 2009

This paper presents a topology optimization approach using element-free Galerkin method (EFGM) for the optimal design of compliant mechanisms with geometrically non-linearity. Meshless method has an advantage over the finite element method(FEM) because it is more capable of handling large deformation resulted from geometrical nonlinearity. Therefore, in this paper, EFGM is employed to discretize the governing equations and the bulk density field. The sensitivity analysis of the optimization problem is performed by incorporating the adjoint approach with the meshless method. The Lagrange multipliers method adjusted for imposition of both the concentrated and continuous essential boundary conditions in the EFGM is proposed in details. The optimization mathematical formulation is developed to convert the multi-criteria problem to an equivalent single-objective problem. The popularly applied interpolation scheme, solid isotropic material with penalization (SIMP), is used to indicate the dependence of material property upon on pseudo densities discretized to the integration points. A well studied numerical example has been applied to demonstrate the proposed approach works very well and the non-linear EFGM can obtain the better topologies than the linear EFGM to design large-displacement compliant mechanisms.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권10호
• /
• pp.922-928
• /
• 2016

Bearing in mind that global climate change is a rising issue, the coastal community of Prek Thnaot, Cambodia has been put on severe effects about natural disasters caused from poor infrastructure and agriculture dependence. This paper proposes to provide and guide a strategic action for the sustainable development path of coastal community in a more continuous manner including a robust resilience to impacts of climate change, natural disasters, and other risks. In doing so, this paper will help environmentally sound management and coastal resources sustainability being sound for socially and economically inclusive development. Proposed fourteen strategic actions for the research should be accompanying with the participation of and cooperation from the local coastal community. Based on the proposed strategic actions, it is critical that the local authorities and other key stakeholders need to accomplish. Providing a good insight for the central government, the strategic action is expected to integrate and prepare a management strategy plan for the local coastal community level. Therefore, this information can be applied to other coastal areas to promote and ensure sustainable protection and management of coastal resources.

• 한국광학회지
• /
• 제11권1호
• /
• pp.47-57
• /
• 2000

프란운호퍼 회절에 의하여 임의의 주어진 세기무늬를 발생시키는 연속적인 또는 양자화된 위상형 회절무늬소자를 설계하는데 hybrid input-output 알고리즘과 새로운 Pnoise 알고리즘을 결합.변형한 2단계 iterative Fourier transform 알고리즘을 이용하였다. 두 가지의 $128\times128$ 이진 세기 무늬와 두 가지의 grayscale 세기 무늬에 때하여 기존 알고리즘들과 비교하였는데, 2단계 iterative Fourier transform 알고리즘은 회절효율이 약간 낮지만 신호 대 잡음비와 특히 균일도에 있어서 우수한 결과를 보였다. 알고리즘에서 사용하는 매개변수들과 잡음영역의 크기에 따른 성능의 변화를 살펴보았고, 양자화된 위상소자의 경우 위상층수에 따른 변화도 살펴보았다. 양자화된 위상소자의 경우 세기 무늬보다는 잡음영역의 크기가 성능을 좌우하는 것으로 나타났다.

• 한국지구과학회지
• /
• 제41권4호
• /
• pp.356-366
• /
• 2020

The accuracy of satellite-observed sea surface salinity (SSS) was evaluated in comparison with in-situ salinity measurements from ARGO floats and buoys in the seas around the Korean Peninsula, the northwest Pacific, and the global ocean. Differences in satellite SSS and in-situ measurements (SSS errors) indicated characteristic dependences on geolocation, sea surface temperature (SST), and other oceanic and atmospheric conditions. Overall, the root-mean-square (rms) errors of non-averaged SMOS SSSs ranged from approximately 0.8-1.08 psu for each in-situ salinity dataset consisting of ARGO measurements and non-ARGO data from CTD and buoy measurements in both local seas and the ocean. All SMOS SSSs exhibited characteristic negative bias errors at a range of -0.50- -0.10 psu in the global ocean and the northwest Pacific, respectively. Both rms and bias errors increased to 1.07 psu and -0.17 psu, respectively, in the East Sea. An analysis of the SSS errors indicated dependence on the latitude, SST, and wind speed. The differences of SMOS-derived SSSs from in-situ salinity data tended to be amplified at high latitudes (40-60°N) and high sea water salinity. Wind speeds contributed to the underestimation of SMOS salinity with negative bias compared with in-situ salinity measurements. Continuous and extensive validation of satellite-observed salinity in the local seas around Korea should be further investigated for proper use.

• 한국IT서비스학회지
• /
• 제19권6호
• /
• pp.97-117
• /
• 2020

Five years have passed since the introduction of the smart factory amid the new opportunities for growth and job creation in relation to domestic manufacturing companies. Nevertheless, there is a lack of analysis on SMEs introduction smart factories. This study empirically analyzed the effects on the introduction of smart factories of domestic metal processing SMEs by distinguishing the characteristics of enterprises In this study, 103 companies which introduced smart factories and another 106 companies which did not introduce them were sampled. The Introduction of the Smart Factory was analyzed by four categories such as the Company characteristics (R&D capability, product production capability, organizational change), entrepreneur characteristics (risk sensitivity), relational characteristics (trust, dependence, cooperation, Influence), and structural characteristics (competition). As a result of the research, we found out product production capacity, risk sensitivity, trust and cooperation, Influence, and competition are statistically significant in the introduction of smart factory. But competition was characterized by a negative (-) sign opposite to the hypothesis. This study is meaningful in that the scope of the analysis has been expanded by analyzing whether smart factory was introduced or not considering the characteristics of the company. And there should be continuous research on its utilization as well as the introduction of smart factory.