• International Journal of Aeronautical and Space Sciences
• /
• 제16권2호
• /
• pp.148-156
• /
• 2015

A continuous type side jet controller which has four nozzles with thrust control devices was considered. It is deployed to a missile for high maneuverability and fast controllability in the terminal guidance phase. However, it causes more complex aerodynamic jet interactions between the side jet and the supersonic free stream than does the conventional impulse type side jet with a small single thruster. In this paper, a numerical investigation of the jet interference effects for the missile equipped with a continuous type side jet thruster is presented. A three-dimensional flow field was simulated by using a commercial unstructured-based CFD solver. The numerical simulation method was validated through comparison with wind tunnel test results for the single jet. The method of defining jet direction for this type of side jet control to minimize simulation cases was also introduced. Flow fields investigation and jet interaction effects for various flow conditions, jet pressure ratios and defined jet direction conditions were performed. From the numerical simulation for the continuous type side jet, extensive aerodynamic interference data were obtained to construct an aerodynamic coefficients database for precise missile control.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권3호
• /
• pp.319-329
• /
• 2016

High-level design aids are mandatory for design of a continuous-time delta-sigma modulator (CTDSM). This paper proposes a top-down methodology design to generate a noise transfer function (NTF) which is compensated for excess loop delay (ELD). This method is applicable to low pass loop-filter topologies. Non-ideal effects including ELD, integrator scaling issue, finite op-amp performance, clock jitter and DAC inaccuracies are explicitly represented in a behavioral simulation of a CTDSM. Mathematical modeling using MATLAB is supplemented with circuit-level simulation using Verilog-A blocks. Behavioral simulation and circuit-level simulation using Verilog-A blocks are used to validate our approach.

• 한국수자원학회논문집
• /
• 제47권4호
• /
• pp.343-356
• /
• 2014

SWMM은 홍수유출 해석, 유역유출 연속모의, 수질모의가 가능한 모형으로서 전세계적으로 널리 사용되고 있는 모형이다. 하지만 유역유출 연속모의와 수질모의에는 다수의 불명확한 매개변수가 포함되어 있으므로 이는 SWMM의 사용에 제약이 되고 있다. 본 연구의 목적은 SWMM을 이용한 유역유출 연속모의와 수질모의의 정확도를 높이고 효율성을 향상시킬 수 있도록 자동 보정 모듈을 개발하는 것이다. SWMM의 자동 보정 모듈은 전역최적화 알고리즘인 집합체 혼합진화 알고리즘과 SWMM을 연계하고, SWMM 내 추정대상 매개변수의 선정 및 적절한 탐색 범위를 설정함으로써 개발되었다. 개발된 자동 보정 모듈의 적절성은 동향 수위관측소 유역에 대하여 구성된 유역유출 및 수질모의 모형의 보정 및 검증을 통해 검토되었다. 그 결과, 자동 보정 모듈을 통해 보정된 모형은 유역의 유출현상을 매우 잘 모사하였고, 수질의 경우에도 비교적 양호한 결과를 도출하였다. 개발된 자동 보정 모듈은 향후 유역유출 모의와 수질해석에 관한 다양한 연구와 설계 등에 활용될 수 있을 것이다.

• 한국물환경학회지
• /
• 제22권5호
• /
• pp.815-823
• /
• 2006

The hydrologic cycle in urban catchment has been changed due to the expansion of impervious area by rapid urban development. In this study, the SWMM 5 (Storm Water Management Model 5) model was used to simulate the hydrologic cycle of the Dorimcheon catchment which suffers from the distorted hydrologic cycle as a typical urban catchment. This study compare continuous simulation of urban runoff combining the channel and sewer system with that of channel only in the Dorimcheon catchment. Continuous simulations of urban runoff were performed for the upstream basin of Dorim bridge. The urban impervious regions were processed by the land use analysis from LANDSAT_TM images. It was performed from 1975 to 2000 for every five years. Surface, groundwater and wastewater runoffs were additionally included in the simulations one at a time. Such simulations made it possible to evaluate those components quantitatively. The result of continuous simulation of urban runoff combining the channel and sewer system is that peak flow and recession are well simulated. The analysis results of urbanization effect on runoff are as follows: the surface runoff in 2000 increases to 64% of the whole precipitation whereas the surface runoff in 1975 amounts to 46% of the precipitation; the groundwater runoff in 2000 amounts to 6% and shows 8% decrease during the period from 1975 to 2000.

• 대한전자공학회논문지
• /
• 제24권4호
• /
• pp.559-567
• /
• 1987

In this paper, the real time simulation of continuous dynamic system was performed by general integration algorithms using multiprocessor. For the stable simulation, the relation between stability of integration method and integration step-size was investigated from the stability graph. As a typical illustration, the real-time digital simulation and the real-time hard-ware-in-the-loop simulation of flight control system were performed and reviewed. Moreover through the real-time simulation, the design verification and performace test of flight control system could be evaluated. The computer used for simulation is AD10, which is a very high-speed special-purpose computer designed specifically for a time-critical simulation of large and complex models of dynamic systems. The simulation validity is demonstrated by comparing hardware simulation results with software simulation results.

• 한국시뮬레이션학회논문지
• /
• 제10권3호
• /
• pp.15-30
• /
• 2001

Hybrid simulation may employ different types of simulation based on which models in different system types are developed. The simulation requires simulation time synchronization and data exchange between such simulators, which is called simulators interoperation. This paper develops such interoperable simulation environments for modeling and simulation of hybrid systems whose components consist of continuous and discrete event systems. The environments, one for centerized and the other for distribute, support interoperation between a discrete event simulator of DEVSim++ and a continuous simulator of MATLAB. The centerized environment, HDEVSim++, is developed by extending the sxisting DEVSim++ environment; the distributed environment, HDEVSimHLA, is developed using the HLA/RTl library. Verification of both environments is made and performance comparison between the two using a simple example is presented. .

• 한국응급구조학회지
• /
• 제20권3호
• /
• pp.21-35
• /
• 2016

Purpose: The purpose of the study was to investigate the continuous effect of advanced cardiovascular life support (ACLS) simulation education according to Felder-Silverman learning style. Methods: A self-reported questionnaire was completed by 94 students of emergency medical technology and nursing. There were 50 female students (53.2%) and 88 students (93.6%) had basic life support certification. The study instruments included knowledge, performance, and confidence. Data were analyzed using SPSS v. 20.0. Results: The learning style consisted of reflective type (51.1%), sensory type (76.6%), visual type (63.8%), and sequential type (64.9%). There was a significant difference in continuous effect on performance by learning type. Conclusion: It is necessary to identify the learning style of students before simulation education in order to maintain continuous effect of ACLS education.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1996년도 춘계학술대회
• /
• pp.7-7
• /
• 1996

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.474-478
• /
• 1986

The phenomenon of a continuous Steel-making process was studied with a set of collected equilibrium data for the steel-oxidation reactions. Mass and Heat balances were also established. Mass transfer constants which are physically unmeasurable but escential for the simulation study in the steel-making process were calculated from the experimental data using an optimization technique. Based on these data various operating conditions and process characteristics were examined.

• 전자공학회논문지B
• /
• 제32B권12호
• /
• pp.1572-1580
• /
• 1995

In this paper, a modified Chebyshev low-pass filter function is proposed. The modified Chebyshev filter function exhibits ripples diminishing toward .omega. = 0 in the passband. So, the modified filter function is realizable in the passive doubly-terminated ladder network for the order n even or odd, thus lending itself amenable to active RC or switched capacitor filters through the simulation techniques. Besides the passive doubly-terminated ladder realizability, lower pole-Q values of the modified function are accountable for improved phase and delay characteristics, as compared to classical function. We have designed the 6th order passive doubly-terminated network using the modified function. And then a continuous-time DDA(Differential Difference Amplifier) filter, which has no matching requirement, is realized by leap-frog simulation technique for fabrication. In the HSPICE simulation results, we confirmed that the designed continuous-time DDA filter characteristics are agreement with the passive filter.