• Korean journal of food and cookery science
• /
• v.13 no.5
• /
• pp.585-591
• /
• 1997

The proximate composition and physicochemical properties of three cultivars of Korean kidney bean sediments, Pink (PKB), Red (RKD) and White (WKB) were compared. No significant differences in the proximate composition and calorie were noticed among three samples. Sediment granule was oval/round and rough in all samples. The amylograms showed no peak and continuous increase of viscosity during heating. The water-binding capacities of the sediments were 322.4∼355.0%. The swelling power and solubility were 5.93∼6.68% and 3.76∼5.28%, respectively. The percent transmittances of the sediment suspension decreased linearly from 50$^{\circ}$∼75$^{\circ}C$. The gelatinization temperature and gelatinization enthalpy determined by DSC (Differential Scanning Caloriemeter) were much lower than those of starches.

• Korean Journal of Ichthyology
• /
• v.28 no.1
• /
• pp.28-34
• /
• 2016

The anatomy and histology of the olfactory organ in Favonigobius gymnauchen was investigated using a stereo microscopy, light microscopy and scanning electron microscopy. The paired olfactory organs in the dorsal snout are set in between the upper lip and the eyes. These organs are composed of two openings (anterior nostril with a tubular structure and posterior nostril), a single olfactory cavity, two nasal sac (ethmoidal and lacrimal sacs), olfactory nerve and olfactory bulb. The distributional pattern of the sensory epithelium is a only one type (continuous type). This epithelium is made up of the receptor cell, supporting cell and basal cell. The receptor cell has a only one type (ciliated receptor cell with 3~4 cilia). The non-sensory epithelium is built of the stratified epithelial cells and has mucous openings on the surface. Such an olfactory organ in F. gymnauchen may be considered to reflect its ecological habitat as a shallow water or tidal pool in the coastal zone.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.88-94
• /
• 2012

In this study, the current-voltage curves for metals were measured using cyclic voltammetry. The relationship between the electrochemical properties and surface states of metals were investigated by Scanning Electron Microscope (SEM). In cyclic voltammetry, we used a 3-electrode system for the electrochemical measurements. The measurement was conducted at the condition that consists of the first reduction from the initial potential to -1350 mV, continuous oxidation to 1650 mV, and last reduction to the initial potential. The scan rates were 50, 100, 150 and 250 mV/s. The results show the C-V characteristics of metals to be for an irreversible process, which was caused by the oxidation current from cyclic voltammogram, when monoethanolamine (MEA) was used as a corrosion inhibitor. When we used MEA as a corrosion inhibitor, the diffusion coefficient was decreased as the concentration of electrolyte was increased. In the SEM images of copper, we observed an increase of surface corrosion at the increased electrolyte concentration. Addition of $1.0{\times}10^{-3}M$ corrosion inhibitor MEA reduced the effect of corrosion prevention due to the relatively large diffusion coefficient at the electrolyte concentration of 0.1N.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.810-819
• /
• 2000

Poly(p-hydroxybenzoate) (PHB)/poly(ethylene terephthalate) (PET) 8/2 thermotropic liquid crystalline copolyester, poly(ethylene 2,6-naphthalate) (PEN), and PET ternary blend was spun to fiber by melt spinninB process, and tensile properties of the fibers were measured. The matrix of the fibers, PET and PEN, were dissolved in ο-chlorophenol at 55$^{\circ}C$ for 2 hours, and the liquid crystalline polymer fibrils were observed using a scanning electron microscope. Halpin-Tsai equation for modulus calculation of short fiber reinforced composite and the rule of mixture for continuous reinforcement composite were modified, and the tensile modulus were calculated and compared with experimental modulus. To minimize difference between the theoretical and the experimental moduli, dimensionless viscosity constant (K) was given and used to modify two equations. The theoretical tensile modulus using the newly modified equations presentel a similar to the experimental tensile modulus of composite, and the modified equations presented a unique way to determine the tensile modulus of the liquid crystalline polymer reinforced thermoplastic composites.

• Applied Microscopy
• /
• v.33 no.4
• /
• pp.325-333
• /
• 2003

Fine structural characteristics of the heart tube and its cardiac muscle cells in spider, Araneus ventricosus are investigated by both of scanning and transmission electron microscopes. The heart tube of the spider is extended mid-dorsally along the anterior part of the abdomen, and is consisted of the thin outer layer of connective tissue (epicardium) and the thick muscle layer (myocardium). The myocardium in the spider has a typical fanlike spiral structure toward anterior part put across between the muscle fibers. Therefore, it did not give rise to the intima, and muscle cells are in direct contact to the hemolymph. The heart tube appeared to be three pairs of ostia and numerous hemocytes accumulated at the inner surface of the myocardial layer. Among several kinds of the hemocytes, the oenocytoids are the most predominant hemocytes accumulated along the myocardial folds which stretched toward heart lumen. The heart muscle cells are cross striated, branched, and multinucleated. They contain a lot of mitochondria, which provide for the continuous energy demands of the heart. Thread-like ganglion on the dorsal side of the heart tube gives off axons that innervate the heart muscle cells.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.158-158
• /
• 2009

The electrophoretic deposition(EPD) technique with a wide range of novel applications in the processing of advanced ceramic materials and coatings, has recently gained increasing interest both in academic and industrial sector not only because of the high versatility of its use with different materials and their combinations but also because of its cost-effectiveness requiring simple apparatus. Compared to other advanced shaping techniques, the EPD process is very versatile since it can be modified easily for a specific application. For example, deposition can be made on flat, cylinderical or any other shaped substrate with only minor charge in electrode design and positioning[1]. The synthesis of the nano-sized Ce0.2Sm0.8O1.9(SDC)particles prepared by aurea based low temperature hydrothermal process was investigated in this study[2].When we made the SDC nanoparticles, changed the time of synthesis of the SDC. The SDC nanoparticles were characterized with field-emission scanning electron microscope(FESEM), energy dispersive X-ray analysis(EDX), and X-ray diffraction(XRD). And also we researched the results of our investigation on electrophoretic deposition(EPD) of the SDC particles from its suspension in acetone solution onto a non-conducting NiO-SDC substrate. In principle, it is possible to carry out electrophoretic deposition on non-conducting substrates. In this case, the EPD of SDC particles on a NiO-SDC substrate was made possible through the use of a adequately porous substrate. The continuous pores in the substrates, when saturated with the solvent, helped in establishing a "conductive path" between the electrode and the particles in suspension[3-4]. Deposition rate was found to increase its increasing deposition time and voltage. After annealing the samples $1400^{\circ}C$, we observed that deposited substrate.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.3
• /
• pp.34-43
• /
• 2010

The fate of hydrophobic organic contaminants (HOCs) in ground water is highly affected by the distribution and property of the carbonaceous materials (CMs) in subsurface sediments. CMs in soils consist of organic matters (e.g., cellulose, fulvic acid, humic acid, humin, etc.) and black carbon such as char, soot, etc. The distribution and property of CMs are governed by source materials and geological evolution (e.g., diagenesis, catagenesis, etc.) of them. In this study, the distribution and property of CMs in subsurface sediments near the Imjin river in the Republic of Korea and HOC sorption property to the subsurface sediments were investigated. The organic carbon contents of sand and clay/silt layers were about 0.35% and 1.37%, respectively. The carbon contents of condensed form of CMs were about 0.13% and 0.45%, respectively. The existence of black carbon was observed using scanning electron microscopes with energy dispersive spectroscopy. The specific surface areas (SSA) of CMs in heavy fraction(HFrCM) measured with N2 were $35-46m^2/g$. However, SSAs of those HFrCM mineral fraction was only $1.6-4.3m^2/g$. The results of thermogravimetric analysis show that the mass loss of HFrCM was significant at $50-200^{\circ}C$ and $350-600^{\circ}C$ due to the degradation of soft form and condensed form of CMs, respectively. The trichloroethylene (TCE) sorption capacities of sand and clay/silt layers were similar to each other, and these values were also similar to oxidzed layer of glacially deposited subsurface sediments of the Chanute Air Force Base (AFB) in Rantoul, Illinois. However, these were 7-8 times lower than TCE sorption capacity of reduced layer of the Chanute AFB sediments. For accurate prediction of the fate of hydrophobic organic contaminants in subsurface sediments, continuous studies on the development of characterization methods for CMs are required.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.233-233
• /
• 2012

나노입자가 가지는 고유한 특성이 부각되면서 이를 소자 특성 향상에 응용하고자 하는 연구가 집중적으로 이루어지고 있다. 박막에 포함된 나노입자는 메모리, 고효율 박막형 태양전지 등에 이용될 수 있는 가능성을 보여주었으며, 나노입자에 기반 하는 소자 제조에 관한 연구가 이루어지면서 플라즈마 내 발생하는 나노입자를 이용하여 패터닝 등에 적용하고자 하는 연구가 국내외에서 활발히 이루어지고 있다. 특히 플라즈마에서 발생하는 나노입자는 플라즈마 내 전기적 및 화학적 특징으로 인해 다른 입자 제조 공정과 달리 응집이 없는 균일한 입자를 제조할 수 있다. 이러한 플라즈마 내 발생 입자를 응용하기 위해서는 각각의 응용 분야에 적합한 입경 분포 제어가 요구된다. 하지만 입자 합성 시 크기분포 특성에 관한 연구는 기존의 포집 및 전자현미경을 이용한 방법으로 실시간으로 분석하기에는 한계가 있다. 따라서 본 연구에서는 저압에서 실시간으로 나노입자 분포를 측정할 수 있는 PBMS (particle beam mass spectrometer)를 이용하여, PECVD (plasma enhanced chemical vapor deposition)의 입자 생성 조건에 따라 continuous, pulse, dual pulse로 분류되는 공정 조건에서 생성되는 입자의 크기 분포를 측정하였다. 또한 그 결과를 기존의 동일한 조건에서 포집 후 SMPS (scanning mobility particle sizer)와 전자 현미경을 이용하여 분석한 결과와 비교하였다. 실리콘 나노 입자의 측정은 PBMS 장비의 전단 부분을 PECVD 장치 내부에 연결하여 진행하였다. PECVD를 이용한 실리콘 나노입자 형성의 주요 변수는 RF pulse, 가스(Ar, SiH4, H2)의 유량, Plasma power, 공정 압력 등이 있으며 각 변수를 조절하여 공정 환경을 구성하였다. 결론적으로 본 연구를 통하여 PECVD를 이용해 각각의 공정 환경에서 생성되는 실리콘 나노입자의 실시간 입경 분포 분석을 PBMS로 수행하는 것에 신뢰성이 있음을 알 수 있었으며, 그 경향을 확인할 수 있었다. 추후 지속적 연구에 의해 변수에 따른 나노입자 생성을 데이터베이스화 하여 요구되는 응용분야에 적합한 특성을 가지는 나노입자를 형성하는 조건을 정립 하는데 중요한 역할을 할 것을 기대할 수 있다.

• Progress in Medical Physics
• /
• v.13 no.4
• /
• pp.229-233
• /
• 2002

We have tested a combined CT/SPECT system with a single CZT detector for x-ray and gamma-ray medical imaging. The size of detector is 10$\times$10$\times$5 ㎣, and the anodes are pixellated as a 4$\times$4 array with a pixel dimension of $1.5\times$1.5 $\textrm{mm}^2$. The cathode was coated with a continuous Au-plated. We have characterized the system performance by scanning a radiographic resolution phantom and the Hoffman Brain phantom. Pulse counting electronics with very short shaping time (50 ㎱) are used to satisfy high photon rates in x-ray imaging, and response linearity up to 3$\times$10$^{5}$ counts per second per detector element is achieved. Energy resolution of 10.4% and 5.3% FWHM at Tc-99m 140 keV peak are obtained for the 50 ㎱ and 2 $mutextrm{s}$ shaping times, respectively. The spatial resolutions of CT and SPECT are about 1mm and 9mm, respectively. Photopeak efficiency of detector systems are 41.0% for 50㎱ and 72.5% for 2 $mutextrm{s}$ shaping time.

• Journal of Veterinary Clinics
• /
• v.31 no.5
• /
• pp.439-444
• /
• 2014

A 5-year-old, 2.7 kg female maltese dog was presented a local veterinary clinic with one week history of hindlimb lameness associated with patellar luxation. Reduction of bilateral medial patellar luxation was operated using trochlear resection and lateral reinforcement technique. Three weeks after the surgery, the dog showed bending spine with pain in thoracic and lumbar region, continuous ataxia and intermittent convulsion. Magnetic resonance imaging scanning revealed a hyperintense mass in right frontal lobe of brain and abnormal cavitation from cervical cord to third lumbar cord. Histopathologically, neoplasm in brain composed of meningothelial cells showed loosely reticular or lace-like morphology with numerous extracellular cystic spaces of variable size and shape. Neoplastic cells were positive for vimentin and negative for neuron specific enolase and glial fibrillary acidic protein. Irregular shaped enlarge central canal-like cavity was existed in cervical and lumbar cords. In our best knowledge, this report described the clinical findings, imaging and histopathologic characteristics of unusual intracranial microcystic meningioma with secondary syringomyelia in a dog.