• The Korean Journal of Pain
• /
• 제11권2호
• /
• pp.230-234
• /
• 1998

Background: Continuous epidural block is widely used for surgical operation and postoperative pain management. The potential infection due to the epidural catheter is a definite harzard of continous epidural block. We investigated the effectiveness of bacterial filter in prevention of infection due to the epidural catheter. Methods: Patients scheduled for transabdominal hysterectomy were assigned to two groups by simple randomization (50 patients per group). All catheters were placed in the 2nd and 3rd lumbar epidural space, using careful sterile technique. Group 1 received injections by the epidural catheter with a bacterial filter and group 2 received injections by the epidural catheter without a bacterial filter. The infection rate in the tips of epidural catheter left for 3 days were compared between the two groups. Results: There was no significant difference in the infection rate between two groups. Conclusions: A bacterial filter of the epidural catheter for surgical anesthesia and postoperative analgesia dose not prevent all kinds of infection in continuous epidural block.

• 한국미생물·생명공학회지
• /
• 제19권4호
• /
• pp.419-427
• /
• 1991

에탄올의 발효 생산성을 높이기 위해서는 발효조의 균체농도를 높여 고농도의 배양을 해야하며 또한 에탄올에 의한 저해 작용을 감소시켜 비생산성을 향상시키기 위해서는 발효액 중에 축적되는 에탄올을 배출 시킬 필요가 있다. 이와 같은 목적으로 본 연구에서는 고분자 hollow fiber membrane, ceramic filter를 이용하여 가장 중요한 조작 변수인 희석율과 bleed stream ratio가 에탄올 생산성에 미치는 영향 및 조작의 문제점과 장기 조업 가능성을 검토하였다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권6호
• /
• pp.357-361
• /
• 2002

Continuous production of lactic acid from glucose by Lactobacillus rhamnosus with cell recycling using an acoustic cell settler was carried out. The performance of the system, such as the concentration of cell and product were compared with the control experiment without recycling. The acoustic settler showed cell separation efficiency of 67% during the continuous operation and the cell concentration in the fermentor with recycle exceeded that of the control by 29%. Com-pared with the control, tactic acid production was increased by 40%, while glucose consumption was only increased by 8%. The higher value of lactic acid production to substrate consumption (Yp/s, product yield coefficient) achieved by cell recycling is interpreted to indicate that the recycled cell mass consumes less substrate to produce the same amount of product than the control Within system environmental changes due to the longer mean cell residence time induced the cells maintaining the metabolic pathways to produce Less by-Product but more product, lactic acid.

• Journal of Microbiology and Biotechnology
• /
• 제15권1호
• /
• pp.192-196
• /
• 2005

Abstract Oligotrophic microbial fuel cells (MFCs) were tested for the continuous monitoring of low biochemical oxygen demand (BOD) by using artificial wastewater, containing glucose and glutamate, as check solution. Ten times diluted trace mineral solution was used to minimize the background current level, which is generated from the oxidation of nitrilotriacetate used as a chelating agent. The feeding rate of 0.53 ml/min could increase the sensitivity from 0.16 to 0.43 ${\mu}$A/(mg BOD/l) at 0.15 ml/min. The dynamic linear range of the calibration curve was between 2.0 and 10.0 mg BOD/l, and the response time to the change of 2 mg BOD/l was about 60 min. The current signal from an oligotroph-type MFCs increased with the increase in salts concentration, and the salt effect could be eliminated by 50 mM phosphate buffer.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2004년도 International Conference Global Environmental Problems and their Health Consequences
• /
• pp.160-164
• /
• 2004

This study was carried out to investigate the removal of TNT (2,4,6-trinitrotoluene) and parathion in the batch and the continuous constructed wetland microcosms consisting of marsh and pond. The batch system study showed that TNT was almost reduced in the marsh and pond system within 20 days and parathion was within 8 days. The major reductive metabolites of TNT includes 2,4-diamino-6-nitrotoluene (24DANT) >2,6-diamino-4-nitrotoluene (26DANT) >4-diamino-2,6-nitrotoluene(4ADNT) > 2-diamino-4,6-nitrotoluene (2ADNT), and the concentrations of these metabolites were decreased during further operation. The generation rates of 4-nitrophenol, the major metabolite of parathion, were 82% and 15% in the bottom of marsh and pond system, respectively. In the continuous system study, although TNT/parathion degradation pattern was similar to the batch's, marsh-pond system showed the most stable TNT/ parathion removal among various continuous reactor combinations.

• Journal of Microbiology and Biotechnology
• /
• 제12권4호
• /
• pp.557-562
• /
• 2002

Physiological characteristics such as specific productivity, morphology of Streptomyces cells Immobilized on celite beads, and operational stability at different dilution rates were investigated in continuous immobilized-cell cultures for the production of kasugamycin. At a dilution rate (D) of 0.05 $h^{-1}$, a relatively high specific productivity was attained and the loss of cell-loaded beads was negligible. At D=0.1 $h^{-1}$, a higher specific productivity and cell concentration could be obtained, resulting in a significantly improved volumetric kasugamycin productivity. However, no stable operation could be maintained due to a significant loss of cell-loaded beads from the reactor that was caused by their fluffy morphology developed in the later stage. At D=0.2 $h^{-1}$, the production of kasugamycin and cell growth were observed to be severely inhibited by the high concentration of residual maltose.

• Corrosion Science and Technology
• /
• 제10권2호
• /
• pp.43-46
• /
• 2011

Zinc consumption in a continuous galvanizing line is one of the highest operating cost items in the facility and minimizing zinc waste is a key economic objective for any operation. One of the primary sources of excessive loss of zinc is through the formation of top dross and skimmings in the coating pot. It has been reported that the top skimmings, manually removed from the bath, typically consist of more than 80% metallic zinc with the remainder being entrained dross particles ($Fe_2Al_5$) along with some oxides. Depending on the drossing practices and bath management, the composition of the removed top skimmings may contain up to 2 wt% aluminum and 1 wt% iron. On-going research efforts have been aimed at in-house recovery of the metallic zinc from the discarded top skimmings prior to selling to zinc recycling brokers. However, attempting to recover the zinc entrapped in the skimmings is difficult due to the complex nature of the intermetallic dross particles and the quality and volume of the recycled zinc is highly susceptible to fluctuations in processing parameters. As such, an efficient method to extract metallic zinc from top skimmings has been optimized through the use of a specialized thermo-mechanical process enabling a continuous galvanizing facility to conserve zinc usage on-site. Also, through this work, it has been identified that filtration of discrete dross particles has been proven effective at maintaining the cleanliness of the zinc. Future efforts may progress towards expanded utilization of filters in continuous galvanizing.

• 한국정보시스템학회지:정보시스템연구
• /
• 제29권4호
• /
• pp.153-169
• /
• 2020

Purpose Many students have concerned about the quality and operation of online courses with universities offering online courses to avoid the spread of COVID-19. To deepen our understanding of university online class systems, this research aims to assess students' satisfaction with online class systems and continuous usage intention on the basis of the perceived benefits and expectation confirmation theory. Design/methodology/approach This paper empirically analyzes the impact of each perceived benefit on user satisfaction and the intention to use it continuously by dividing the perceived benefits considered in existing literature into utilitarian benefits (convenience), emotional benefits (pleasure), and symbolic benefits (personal benefits). Moreover, the perceived expectations and performance have also been assessed with its impact on satisfaction and the intention to continue use. Data collected from 241 university students were empirically tested against a research model. Findings Analysis results showed that perceived advantages (comfort, enjoyment and personalized benefit) significantly affect user satisfaction and that perceived benefits have positive effects on the intention to continue use whereas the expected confirmation do not significantly influence on the intention to continue use.

• 한국멀티미디어학회논문지
• /
• 제25권2호
• /
• pp.145-156
• /
• 2022

Nowadays, the complexity of object tracking models among hardware applications has become a more in-demand duty to complete in various indeterminable environment tracking situations with multifunctional algorithm skills. In this paper, we propose a virtual city environment using AirSim (Aerial Informatics and Robotics Simulation - AirSim, CityEnvironment) and use the DQN (Deep Q-Learning) model of deep reinforcement learning model in the virtual environment. The proposed object tracking DQN network observes the environment using a deep reinforcement learning model that receives continuous images taken by a virtual environment simulation system as input to control the operation of a virtual drone. The deep reinforcement learning model is pre-trained using various existing continuous image sets. Since the existing various continuous image sets are image data of real environments and objects, it is implemented in 3D to track virtual environments and moving objects in them.

• Journal of Chest Surgery
• /
• 제57권3호
• /
• pp.312-314
• /
• 2024

A 3-year-old boy with Glenn physiology exhibited refractory heart failure with reduced ejection fraction. To improve the patient's oxygen saturation, he underwent ventricular assist device (VAD) implantation with concomitant Fontan completion. The extracardiac conduit Fontan operation was performed with a 4-mm fenestration. For VAD implantation, Berlin Heart cannulas were positioned at the left ventricular apex and the neo-aorta. Following weaning from cardiopulmonary bypass, a temporary continuous-flow VAD, equipped with an oxygenator, was utilized for support. After a stabilization period of 1 week, the continuous-flow VAD was replaced with a durable pulsatile-flow device. Following 3 months of support, the patient underwent transplantation without complications. The completion of the Fontan procedure at the time of VAD implantation, along with the use of a temporary continuous-flow device with an oxygenator, may aid in stabilizing postoperative hemodynamics. This approach could contribute to a safe transition to a durable pulsatile VAD in patients with Glenn physiology.