• 중소기업연구
• /
• 제41권4호
• /
• pp.1-36
• /
• 2019

본 연구의 목적은 스마트 팩토리의 전략적 활용을 위한 스마트 팩토리 구축 목적 - 스마트 팩토리 구축내용 - 스마트 팩토리 지속적 활용 간의 관계를 파악하는 것이다. 구체적으로 본 연구는 스마트 팩토리 구축 목적을 두 가지 요인 - (1) 생산성 향상, (2) 유연성 향상 - 으로 구분하고, 이들 각각이 다음의 3가지 측면의 스마트 팩토리 구축내용 - (1) 자동화 영역(설비 자동화, 업무 자동화), (2) 제조 빅데이터 기술 활용영역(생산 프로세스의 재구축을 위한 제조 빅데이터 활용, 생산 프로세스의 점진적 개선을 위한 제조 빅데이터 활용), 그리고 (3) 가치사슬 통합 범위(내부통합, 외부통합) - 에 미치는 영향을 파악하고, 이어서 본 연구는 스마트 팩토리 구축 내용이 스마트 팩토리 지속적 활용에 미치는 영향을 조사하였다. 또한, 기업규모에 따라 스마트 팩토리 구축 목적 - 스마트 팩토리 구축 내용 - 스마트 팩토리의 지속적 활용 간의 관계가 어떻게 달라지는 지를 살펴보았다. 본 연구의 실증분석은 총 151개의 표본기업들을 대상으로 하였다. 표본기업들의 구성은 중소기업 100개사와 대기업 51개사로 구성되었다. 이의 분석결과는 다음과 같다. 첫째, 생산성 및 유연성 향상이라는 스마트 팩토리 구축 목적은 스마트 팩토리의 모든 구축 내용 변수들에 긍정적 영향을 주었다. 둘째, 스마트 팩토리 구축 내용들로서 설비 자동화, 업무 자동화, 생산 프로세스의 재구축을 위한 제조 빅데이터 활용, 내부 가치사슬 통합, 외부 가치사슬 통합은 스마트 팩토리의 지속적 활용에 긍정적 영향을 주었다. 셋째, 스마트 팩토리 구축 목적이 스마트 팩토리 구축 내용에 미치는 영향은 구축 목적이 생산성 향상이냐 혹은 유연성 향상이냐에 따라 차이가 있음을 확인할 수 있었다. 넷째, 기업규모에 따른 조절효과 분석 결과 기업규모에 따라서 스마트 팩토리의 구축 목적과 구축 내용 간에 차이가 있는 것으로 나타났다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권5호
• /
• pp.297-304
• /
• 2015

A multilayer gaseous detector has been developed for fast dose-verification measurements of raster-scan-mode therapeutic beams in particle therapy. The detector, which was constructed with eight thin parallel-plate ionization chambers (PPICs) and polymethyl methacrylate (PMMA) absorber plates, is closely tissue-equivalent in a beam's eye view. The gas-electron signals, collected on the strips and pad arrays of each PPIC, were amplified and processed with a continuous charge.integration mode. The detector was tested with 190-MeV raster-scan-mode beams that were provided by the Proton Therapy Facility at Samsung Medical Center, Seoul, South Korea. The detector responses of the PPICs for a 190-MeV raster-scan-mode proton beam agreed well with the dose data, measured using a 2D ionization chamber array (Octavius model, PTW). Furthermore, in this study it was confirmed that the detector simultaneously tracked the doses induced at the PPICs by the fast-oscillating beam, with a scanning speed of 2 m s-1. Thus, it is anticipated that the present detector, composed of thin PPICs and operating in charge.integration mode, will allow medical scientists to perform reliable fast dose-verification measurements for typical dynamic mode therapeutic beams.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1365-1381
• /
• 1990

본 연구에서는 Kant 등이 제안한 고차판이론의 C연속변위 유한요소 모델을 사 용하여 충격자와 적층판의 저속 충격 응답에 대하여 연구하여 그 결과를 Mindlin의 판 이론에 의한 계산 결과와 비교하고, 경계 조건의 영향 및 충격자의 충격속도, 질량변 화에 대한 접촉력의 변화를 고찰하고자 한다.

• 품질경영학회지
• /
• 제44권4호
• /
• pp.735-749
• /
• 2016

Purpose: This study is addressing the establishment of the knowledge information system supplying the quality management of weapon system. It is going to support the continuous quality management through the linkages and integration between the product structure and the quality information. Methods: The interrelated relationship of the product structure information and quality information of weapon system would be expressed explicitly by taking advantage of the ontology concept. The quality information of distributed systems would be integrated through the SOA(Service Oriented Architecture)-based Web services. After defining the inference rules, which could be utilized in the quality management, in the constructed knowledge information system, the quality information would be inferred through the queries. Results: By building the integrated quality information knowledge system through the ontology and SOA, the connectivity between the product structures and dispersed quality information was enhanced. The utility and applicability of this study were checked up through the inferences on the products and quality information by using the information built by the semantic relationship of facts. Conclusion: We established the knowledge and information system as a systematic approach to support the quality management of weapon system. This is not affected by the organizations and systems, and it seems that it could be utilized across the quality management as the efficient knowledge sharing architecture supporting the quality management of weapon systems in the aspect of the product integration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.1984-1986
• /
• 2001

In order to provided continuous solutions, latest developing navigation systems tend to integrate GPS receiver with INS or DR. Using the GPS carrier-phase measurements, an attitude GPS receiver with three antennas obtain the 3-dimensional attitude such as roll, pitch, and heading as well as position and velocity. With these angle measurements, in the attitude GPS/INS integrated system, attitude or gyro errors can be directly compensated. In this paper, we develop an integrated navigation system that combines attitude GPS receiver with INS. The performance of real-time integrated navigation system is determined by not only the implements of integration filter but also the synchronization of measurements. To meet these real-time requirements, the navigation software is implemented in multi-tasking structure in this paper. We also employ time-synchronization technique in the multi-sensor fusion. Experimental results show that the performance of the attitude GPS/INS integrated system is consistent even when cycle-slip occurs in carrier-phase measurements.

• Geomechanics and Engineering
• /
• 제34권1호
• /
• pp.29-41
• /
• 2023

The 3D geospatial modeling of geotechnical information can aid in understanding the geotechnical characteristic values of the continuous subsurface at construction sites. In this study, a geostatistical optimization model for the three-dimensional (3D) mapping of subsurface stratification and the SPT-N value based on a trial-and-error rule was developed and applied to a dam emergency spillway site in South Korea. Geospatial database development for a geotechnical investigation, reconstitution of the target grid volume, and detection of outliers in the borehole dataset were implemented prior to the 3D modeling. For the site-specific subsurface stratification of the engineering geo-layer, we developed an integration method for the borehole and geophysical survey datasets based on the geostatistical optimization procedure of ordinary kriging and sequential Gaussian simulation (SGS) by comparing their cross-validation-based prediction residuals. We also developed an optimization technique based on SGS for estimating the 3D geometry of the SPT-N value. This method involves quantitatively testing the reliability of SGS and selecting the realizations with a high estimation accuracy. Boring tests were performed for validation, and the proposed method yielded more accurate prediction results and reproduced the spatial distribution of geotechnical information more effectively than the conventional geostatistical approach.

• 대한통합의학회지
• /
• 제9권3호
• /
• pp.1-8
• /
• 2021

Purpose : There is a lack of research on this field in the Republic of Korea, especially those that have seen the effect of interaction between siblings through sensory integration therapy (SIT). Therefore, this study sought to find out the effectiveness of SIT with siblings through the Revised Knox Preschool Play Scale (RKPPS) and playtime. Methods : The experimental group consisted of 10 disabled children, and 10 normal siblings of the disabilities joined the program as a helper. In addition, 10 children with disabilities conducted the intervention as a control group. The difference between the experimental group and the control group is whether they participate with their sibling or not during the intervention period. The present study was conducted a SIT for 40 minutes per week for the experimental and the control group and then had 10 minutes of an interview with the parents of children with disabilities. A total of 10 programs were implemented for 10 weeks. Results : The experimental group showed statistically significant differences in space management, material management, pretense/symbolic, participation, and total scores. The control group showed significant differences between pre and post results in the participation and the total scores. The experimental group and the control group showed significant differences in the pre-post comparison results. The comparison of post-intervention between both groups of the RKPPS and playtime results showed a statistically significant increase in the experimental group. Conclusion : The sibling SIT showed better play level and time than the individual therapy. However, comparisons before and after the intervention in the level of play showed significant results only in participation and total scores in the control group. Clinically, it is recommended to make good use of sibling relationships when applying SIT, and if that is not possible, continuous observation is needed that children who received treatment become familiar with the environment in which they can be treated.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.99-102
• /
• 2001

본 연구에서는 히루딘을 생산할 수 있는 재조합 S. cerevisiae 에서 ‘히루딘 유전자의 copy number 와 히루딘 발현양과의 관계를 규명하였으며 , ${\delta}$ 서열을 이중으로 사용한 히루딘 발현벡터를 제조하여 히루딘 유전자의 효모염색체로의 도입효율을 증가시켰다. 숙주세포인 효모의 GALl 유전자를 파쇄하여 균체에 의한 갈락토스 소모를 방지하여 보다 경제적으로 히루딘을 생산할 수 있는 시스템을 개발하였으며, 재조합 H. polymorpha을 이용한 발효공정에서 히루딘 생산을 위한 최적의 메탄올 농도를 결정하였다.

• Nuclear Engineering and Technology
• /
• 제43권5호
• /
• pp.447-458
• /
• 2011

This paper proposes an approximated contact force model to identify the nonlinear behavior of a fuel rod with gap supports; also, the numerical prediction of interfacial forces in the mechanical contact of fuel rods with gap supports is studied. The Newmark integration method requires the current status of the contact force, but the contact force is not given a priori. Taylor's expansion can be used to predict the unknown contact force; therefore, it should be guaranteed that the first derivative of the contact force is continuous. This work proposes a continuous and differentiable contact force model with the ability to estimate the current state of the contact force. An approximated convex and differentiable potential function for the contact force is described, and a variational formulation is also provided. A numerical example that considers the particularly stiff supports has been studied, and a fuel rod with hardening supports was also examined for a realistic simulation. An approximated proper solution can be obtained using the results, and abrupt changes from the contacting state to non-contacting state, or vice versa, can be relieved. It can also be seen that not only the external force but also the developed contact force affects the response.

• 제어로봇시스템학회논문지
• /
• 제21권8호
• /
• pp.718-722
• /
• 2015

This paper proposes a fractional-order PID (Proportional-Integral-Derivative) control used electromagnetic strip stabilization controller in a continuous galvanizing line. Compared to a conventional PID controller, a fractional-order PID controller has integration-fractional-order and derivation-fractional-order as additional control parameters. Thanks to increased control parameters, more precise controller adjustment is available. In addition, accurate transfer function of a real system generally has a fractional-order form. Therefore, it is more adequate to use a fractional-order PID controller than a conventional PID controller for a real world system. Finite element models of a $1200{\times}2000{\times}0.8mm$ strip, which were extracted using a commercial software ANSYS were used as simulation plants, and Gaussian mixture models were used to find optimized control parameters that can reduce the strip vibrations to the lowest amplitude. Simulation results show that a fractional-order PID controller significantly reduces strip vibration and transient response time than a conventional PID controller.