• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.779-782
• /
• 1990

Recently batch type cold rolling processes have been replaced by continuous annealing type processes for cold rolled sheets of mild steel and high strength steel in order to obtain higher productivity, labor saving. In the continuous annealing line, it is very important to maintain the target steel strip temperature at the exit side of each furnace. The automation system of continuous annealing line is based on a hierachical composition. This paper shows how to preset the set value of furnace temperature control for the heating section in a continuous annealing line. Saying in other words, this paper presents the development of an adaptive control approach to control the exit strip temperature in the continuous annealing line. There are three parts in this approach; one is a process modelling and another is recursive parameter estimation and the other is a design of temperature controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.608-610
• /
• 2004

In continuous annealing line (CAL), POSCO, the center position control (CPC) is an essential technique that renders the steel-strip to pass at the center of a roll in order to prevent the strip from skewing or breaking. The CPC algorithm currently installed on the steering roll in the heating section of CAL is to control the strip position by using the reverse phase of error from the center position, without considering the dynamics of strip horizontal movement. Such algorithm may, unfortunately, require a manual operation occasionally when the range of strip input becomes wide, causing the dynamics 0 be dominant. Other PID-type control is rarely used in automatic operation because the excess of response may occur when the discontinuous points such as welding joints pass through rolls. In this paper, we identify the CPC system by using off-line data and design a compensator for the excessive dynamics by using the adaptive inverse control. Simulation result depicts the improved reliability of the proposed CPC system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.616-619
• /
• 1996

This paper presents the configuration methodology of Distributed Control System(DCS)s for process plant and their performance evaluation. Performance evaluation is specified both in terms of operational and installation aspects of system. In order to evaluate performance criteria of operational aspect, a simulation method is proposed. Modeling of system components including process computer, database, process controllers and LANs, etc, is implemented for simulation. Based on these characteristics, different system configurations are evaluated and compared through results about evaluation criteria in order to select the best DCS for particular process. The results, in abbreviated form, of the performance evaluation of DCS controlling a CAL(Continuous Annealing Line) plant of iron process are presented.

• 소성∙가공
• /
• 제25권3호
• /
• pp.169-175
• /
• 2016

The hearth roll, which transfers the cold-rolled strip sheet in a Continuous Annealing Line (CAL), is always subjected to changes in the surface temperature and subsequently experiences thermal stress in service. These variations lead to the generation of thermal cracks on the hearth roll surface as well local plastic deformation. We performed finite element analysis to predict the thermal stress changes on the hearth roll surface and designed the collar shape of the hearth roll to minimize these thermal stresses. Results show that the hearth roll with a collar having an obtuse angle is much more effective than a hearth roll with collar having a right angle when the tangential stress, which is one of main causes leading to surface cracks, is compared for the various conditions. It was found that the tangential stress and the temperature on the surface of hearth roll can be reduced by 51.9% and 26℃ if the shape of roll on collar is re-designed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.119-125
• /
• 2004

Radiant tube heaters are widely used for indirect heating in heat treatment processes such as continuous annealing line(CAL) or continuous galvanizing line(CGL). Main issues for radiant tube are temperature uniformity, lifetime, thermal efficiency. To achieve higher heat release, the radiant tubes are fired at a higher fuel rate and therefore local overheating occur. A numerical simulation based on a commercial code FLUENT has been performed to investigate local overheating of radiant tube heaters. To minimize local overheating, the effects of radiating fins, flue gas recirculation(FGR), two-stage combustion were investigated. More uniform temperature distribution was achieved in the longitudinal direction within the tube with radiating fins and this contributed to increase the life of radiant tubes. Furthermore, the radiant tube with radiating fins was proven to be more efficient than the one without fins. The effects of flue gas recirculation and two stage combustion on the efficiency of the radiant tube were also considered and the results were presented.

• 산업공학
• /
• 제16권2호
• /
• pp.201-210
• /
• 2003

The purpose of this research is to develop a scheduling system for CAL (Continuous Annealing Line) in Cold Rolling Mill. Based on CSP (Constraint Satisfaction Problem) technique in artificial intelligence, appropriate algorithms to provide schedules satisfying all the constraints imposed on CAL are designed and developed. Performance tests show that the proposed scheduling system outperforms human operators in case of aggregating the same attributes and minimizing the thickness differences between two adjacent coils.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.219-221
• /
• 1995

This paper proposes a model for simulation and performance evaluation of distributed computer systems(DCS). The model is composed of operating system(OS), resource, task, environment submodel. Task Flow Graph(TFG) is suggested to describe the relation between tasks. This paper considers task response time, the scheduler's ready queue length, utilization of each resource as performance indices. The distributed system of Continuous Annealing Line(CAL) in iron process is simulated with the proposed model.

• 한국수소및신에너지학회논문집
• /
• 제30권5호
• /
• pp.455-464
• /
• 2019

Experiments were conducted to investigate the sensitivity of steel plate oxidation with temperature in a simulated furnace. Used steel plates were a general steel and a high tensile steel. Porous media burner (PM burner) used in model furnace was made for uniform temperature profile. The surrounding temperature was controlled by adjusting the flow rate of the mixture in the combustor. Oxide layer analysis was performed using SEM image analysis and EDS line scanning. Both steel sheets showed a tendency to increase the thickness of the steel sheet surface oxide layer as the temperature increases, and it was confirmed that the flaking phenomenon in surface oxidation layer appeared when the temperature was above a certain temperature.

• Corrosion Science and Technology
• /
• 제10권5호
• /
• pp.162-166
• /
• 2011

Effects of chemical compositions and manufacturing conditions on mechanical properties and microstructures were investigated in order to obtain galvannealed high strength dual phase steel sheets with superior mechanical properties and coating properties. An intercritical annealing between Ac1 and Ac3 was conducted to produce the DP (dual phase) steel sheets, followed by quenching to room temperature. The purposes of Al addition are to reduce the iron oxidation with chemical composition (Si, Mn etc.) and to improve the wettability by liquid zinc. The present study will focus on the characterization for making dual phase steel sheets and enhancing the galvanizability of Al added DP steel sheets about continuous annealing line in CGL.

• 공학논문집
• /
• 제3권1호
• /
• pp.65-73
• /
• 1998

영상복원법 중에는 복원하고자 하는 원 영상의 화소밝기분포가 부분적으로 평탄하다는 가정을 한 부가적인 Gibbs 사전정보를 포함하는 방법이 있다. 이 경우 Gibbs 사전정보를 표현하기 위해 원 영상의 화소밝기를 나타내는 실변수 뿐 아니라 경계를 정의하는 이진변수를 포함하는 에너지 함수를 정의하게 된다. 그러나, 이러한 실변수와 이진변수의 복합형태가 존재할 경우 이들을 동시에 추정하는 것은 매우 어려운 것으로 알려져 있다. 본 연구에서는 deterministic annealing 방법의 응용을 고찰하기로 한다. Deterministic annealing 방법은 다른 방법과 달리 실수 값을 취하는 변수 및 이진변수가 복합형태로 존재하는 문제를 다루는데 있어서 매우 원리적이고 효율적인 방법을 제공한다. 이 방법에서는 복합형태를 취하는 원 함수에 근접하도록 하는 일련의 함수들을 정의하게 되는데, 이때 새로운 일련의 함수들은 실변수만을 취하도록 변환된다. 일련의 함수 중 개개의 함수는 조종파라미터(냉각시 온도에 해당)에 의해 지정된다. 고온에서의 에너지 함수는 저온에서의 에너지와 유사하나 좀더 완만한 형태를 취하게 된다. 따라서, 온도를 서서히 낮추면서 고온에서의 에너지 함수를 저온에서의 에너지 함수로 변환시켜 감으로써 에너지 함수를 최소화하는 작업이 용이해 진다. 이것이 연속방법의 핵심이다. 본 논문에서는 이러한 연속방법을 Bayesian 영상복원 모델에 적용하여 그 성능을 실험을 통해 검증한다.