• Korean Journal of Social Welfare
• /
• v.56 no.2
• /
• pp.285-310
• /
• 2004

The major purpose of this study is to examine effectiveness of an intervention program which aims at education/training caregivers of the dementia and/or stroke elderly. This program was conducted at group level. Participants of this program were the primary caregivers who have taken care of the elderly with dementia and/or stroke. To test the effectiveness of the caregiver education/training program, this study employed an quasi-experimental design: to compare pretest score with posttest ones for the same participants. Total forty two primary caregivers have completed the program. Seventeen caregivers were in experimental group, whereas twenty five ones belonged to control group. Our data suggest that, for the primary caregivers, subjective quality of life was more important than cargiving burden. Subjective quality of life among the caregivers significantly improved, after completing the program. This result suggests that a short-term intervention program at group level is not effective to reduce caregiving burden because an infra structure of community resources, to which the caregivers and their family access, did not remain at sufficient level. However, participants have showed improved mutual solidarity, and they have exposed to wider spectrum of a variety of information. As a result, they have perceived that the level of subjective quality of life has positively changed. Additional factors have influenced on determining the quality of life among the caregivers. The caregivers, whose demented elderly showed lower level of ADL and IADL, or who have experienced the short period of caregiving, were more likely to belong to higher level of quality of life. The quality of life among the caregivers were even more improved in the following group: being young, and highly educated, man. One of the contributions from this study is that we have found caregiver's characteristics, which need an intervention most. In addition, our study implies that specific contents of the caregivers' education/training program should be conducted based on each family's unique characteristics.

• Journal of the Korea Concrete Institute
• /
• v.20 no.4
• /
• pp.415-421
• /
• 2008

Reinforced concrete starts to corrode when the chloride ion concentration which is the sum of included in concrete and penetrated from environments exceeds a certain level of critical chloride concentration. Therefore each country regulates the upper bounds of chloride amount in concrete and the regulations are different for each country due to its circumstances. In this study, the critical threshold chloride content according to unit cement amount is empirically calculated to propose a reasonable regulation method on the chloride amount. As a result, the critical threshold chloride content increases considerably according to cement content and it agrees with the established theories. The present regulations on total chloride amount 0.3 or 0.6 kg chloride ions per $1\;m^3$ of concrete does not reflect the influences of mix design, environmental conditions and etc. So it can be said that it is more reasonable to regulate the critical threshold chloride content by the ratio of chloride amount per unit cement content than by the total chloride content in $1\;m^3$ of concrete.

• Journal of Korean Home Economics Education Association
• /
• v.19 no.2
• /
• pp.103-114
• /
• 2007

The purpose of this study is to satisfy students in adolescent trends of school uniforms and to provide them with useful material with matching current fashions by analyzing the attitude of students toward uniform transformation in female highschool students and investigating factors influencing on behaviors of uniform transformation. The subjects of this study are 30 students in Daegu with the basic ways of investigating such as depth interview and survey. The results are as follows; First, students agree to wearing school uniforms. As the main reason for wearing school uniforms, students put emphasis on peer pressure. It is also analyzed that the figure of students' body have some influence on the attitude of students toward wearing uniform while students' appearance have no influence on the attitude of students toward wearing uniform. Second, students showed high satisfaction in school uniforms. While students are satisfied with design and color of school uniform, they are not satisfied with practicality, economic efficiency and the quality of textile. Third, the study shows most students have experience of uniform transformation as a result of depth interview about actual condition of uniform transformation. Whereas students usually wear the jacket with its width and length shortened, they tend to lengthen skirt and unstitch pleat of skirt. Fourth, there are many reasons for uniform transformation as a result of depth interview with students. Transformation for satisfying aesthetic desire tops the list, followed by transformation for matching, transformation for peer pressure. As shown by the results above, every school needs to make various efforts to satisfy students, teachers and parents by considering and using students' opinion in order to choose the better school uniforms. In addition, the study related to school uniform transformation need to have more various investigating ways to acquire more authentic results such as expanding the subjects to not only students but also teachers and parents and in-depth comparison between subjects.

• Journal of Navigation and Port Research
• /
• v.36 no.5
• /
• pp.329-338
• /
• 2012

The Institute Time Clauses-Hulls 1/10/83 has been using widely with attachment and/or endorsement of the Institute Warranties 1/7/76 stipulating vessel's trading limits. Taking into consideration of several changes and renewals on the contents of the Institute Time Clauses-Hulls for clarifying the clauses themselves with development on technology of vessel's construction and navigational equipments up to the present, the clauses on the Institute Warranties 1/7/76 should have been changed and/or renewed. Moreover, the insured still has been burdening additional premium in vessel's navigating and / or calling to the areas stipulated in the Institute Warranties 1/7/76 regardless of any changes of marine business environments. Thus, this study aims to analyze the Institute Warranties 1/7/76 as well as to suggest a reasonable level of additional premium for breach of Institute warranties through not only a comparative analysis between the Institute Warranties clauses and those of the corresponding Institute Warranties using in the Japanese Fire and Marine Insurance companies but also consideration of current circumstances on changes in climatic conditions, vessel design, navigation and communication requirements and capabilities.

• The KIPS Transactions:PartA
• /
• v.10A no.2
• /
• pp.93-100
• /
• 2003

With the advent of distributed computing and Web service technologies, lots of users have been requiring services that can conveniently obtain and/or support well-assembled information based on Web. For this reason, we are to construct Automatic Linking Support Systems for generating Web-based integrated information and supporting retrieval information according to user's various requirements. Our system organization is based on client/server system. A server environment consisted of automatic linking engine that can provide lexical analyzing, query processing and integrated document generating functions, and databases that are made of dictionaries, image and URL contents. Also, client environments consisted of Web editor that can generate integrated documents and Web helper that can retrieve them via automatic linking engine and databases. For client's user-friendly interfaces, web editor and helper programs can directly execute by down leading from a server without setup them before inside clients. For reducing server's overheads, Parts of server's executing modules are distributed to clients on which they can be executing. As an implementation of our system, we use the JDK 1.3, SWING for user interfaces like Web editor and helper, RMI mechanism for interaction between clients and a server, and SQL server 7.0 for database development, respectively. Finally, we showed the access procedures of automatic document linking engine and databases from Web editor or Web helper, and results appearing on their screens.

• Korean Chemical Engineering Research
• /
• v.56 no.5
• /
• pp.631-640
• /
• 2018

The application of an oxy-combustion circulating fluidized bed combustor (Oxy-CFBC) for low grade coals has recently developed in the world to meet the continuous increase of energy demand and to achieve the reduction of greenhouse gases. Since demo plants for Oxy-CFBC have been developed, the combustion properties of Oxy-CFBC in various operation conditions, such as gas flow rates, combustion temperature, fuel, and so on, should be investigated to develop design criteria for a commercial Oxy-CFBC. In this study, a computational simulation tool for Oxy-CFBC was developed on the basis of the IEA-CFBC (International Energy Agency Circulating Fluidized Bed Combustor) model. Simulation was performed under various conditions such as reaction temperature ($800^{\circ}C{\sim}900^{\circ}C$), oxygen contents (21%~41%), coal feeding rate, Ca/S mole ratio (1.5~4.0), and so on. Simulation results show that the combustion furnace temperature is higher in oxy 1 than air fired. However, the temperature gradient tended to decrease with increasing oxy mixing percent. In case of $SO_x$, the higher the Ca/S mole ratio and oxy mixing percent, the higher the desulfurization efficiency.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.479-490
• /
• 2013

In this research we surveyed level of textual recognition and of practice by nursing students regarding patient privacy protection. The subjects were 383 nursing students. The questionnaire developed by Lee and Park (2005) were modified and used. Data analysis was conducted through descriptive statistics, t-test, ANOVA, and Pearson correlation coefficients. The result shows that about 96.1% of the subjects received education on patient privacy protection in school or hospital but 48.0% of all received education of 10 minutes or less. Average score for recognition of patient privacy protection was a 4.13 but average practice score was 3.84. Among all areas, communication tasks showed the highest scores for both recognition and practice. There are differences according to grade in school and age of the subject, and experience with clinical practice, existence of regular educational program embedded in clinical practice at hospitals, and the length of each educational session. For both total score and score for every domain, there was a correlation between recognition and practice. The conclusions drawn from this research will help colleges of nursing and hospitals to design and develop contents of educational programs for nursing students.

• Progress in Medical Physics
• /
• v.13 no.3
• /
• pp.109-113
• /
• 2002

In recent years, the radiotherapy equipment has become much more sophisticated, and with the complication comes an increased set of quality assurance (QA) responsibilities. Today's computer controlled linear accelerator requiring QA of not only the radiation integrity, but also the mechanical accuracy of the linear accelerator. The existing QA sheets are adequate for acceptance testing and commissioning but those sheets are somewhat descriptive form for routine QA. establishing the QA sheets for a facility are more efficient if the sheets could estimate the long-term stability for the result of QA. We are going to develope new prototype of mechanical QA sheet to visualize and to verify long-term stability of mechanical QA for clinical linear accelerator. The items included in mechanical QA sheet were 1) gantry rotation, 2) collimator rotation, 3) couch rotation, 4) optical distance indicator (ODI), and 5) laser alignment. We compared new prototype sheet with conventional sheet for several hospitals in Korea for those items. The QA acceptance criteria in this study mainly followed published recommendations. The contents of test for mechanical QA are the following. Confirm that the digital and/or mechanical gantry angle readouts are correct. Verify that digital and/or mechanical readouts of collimator angle agree with the true angle, as determined with the protractor. Measure the light field using a graph paper and compare with the digital readouts. Confirm digital readout accuracy. Verify that the sagittal laser, the left and right lasers, and the ceiling laser intersect at the isocenter. In the design of new QA sheet, we emphasized the representation of the long-term stability of mechanical QA by using Excel program. By using the new prototype QA sheet, we simplified and visualized the mechanical QA process, and could estimate the long-term stability of mechanical error of linear accelerator.

• International Commerce and Information Review
• /
• v.8 no.1
• /
• pp.283-303
• /
• 2006

This is the research on the correlation between the marketing activities conducted by the companies participating in the overseas exhibitions in the exhibition and the satisfaction of the visitors. I have been able to obtain the following findings through the positive research on the satisfaction of the visitors to the overseas exhibitions. The research findings show that the external elements of the participating companies such as 'external appearances of booths, interior facilities and the atmosphere', 'designs of exhibits', 'size of the participating companies', and the publicity elements of the participating companies such as 'the degree of application of mass media', 'prior publicity of the participating companies', etc. among the marketing activities conducted by the participating companies in the exhibition affect the interest and repeat business deals of the visitors. The findings also show that the elements to induce the interest of the visitors such as the booth design and display of products where the participating companies may produce their unique image and the prior publicity to the visitors constitute the important elements of marketing. It has also been revealed that the visitors whose purpose of the visits are to purchase the products and to satisfy their interest in 'the events and contents of the events affect the interest and the repeat business deals of the visitors, among the interest and repeat business deals pursuant to the characteristics of the visitors. It has also been found that the visitors who have recognized the representative brands in the exhibitions affect the interest and the repeat business deals and the visitors who have visited the exhibition several times are more satisfied than the visitors who have visited the exhibition for the first time. The comparative evaluation of the degree of importance of the marketing activities of the participating companies before the visitors' visit to the exhibitions and the degree of satisfaction after their visit reveals degrees of satisfaction in the order of 'the booth staff's professional knowledge of the exhibits', 'foreign language proficiency and their techniques of negotiation and demonstration', 'designs of the exhibits (colors and packaging), 'prior publicity of the participating companies. Such being the case, the companies participating in any of the overseas should maximize the result of their participation in the exhibition by training their staff in the products and foreign languages and through the prior publicity. It has also been found out that "the atmosphere of the booth in the exhibition such as 'launching of new products', 'external appearances of the booth, layout of the interior facilities and the atmosphere and events of the participating companies affect the interest and repeat business deals of the visitors, among the factors for the satisfaction of the visitors. Therefore, it has been proven that the external factors such as the external appearances of the booth, display of the products, launching of new products and events producing the atmosphere of the booth of the participating companies among the marketing activities conducted by the participating companies, and the extent of the training of the booth staff and prior publicity are the major factors affecting the interest and repeat business deals of the visitors.

• Journal of Digital Convergence
• /
• v.14 no.7
• /
• pp.339-345
• /
• 2016

While a game market has been growing consistently world widely, a market of arcade or video game has been detained. In this stagnation, the latest one in 2015, "Super Mario Maker" of Mario series that's been running in good for 30 years, the notable sale and growth of which are extraordinary. As for a study in customizing, a literature of game customizing and studies that are foregone were mostly handling contents about a game character. In the survey that's done in this thesis about knowledge and needs in customizinge game users have, it was shown they want to customize sides of a rule and a character. I analyzed what the main factors are in this game which uses a main concept of customizing and the reason for high profits and popularity. As a result of the analysis, four features, possibility to customize a game rule, share data among users, collaboration in marketing with NFC figure characters, offering updates with sustained and new customizing features were found out. I am certain a game customizing will be helping to meet users and be used for various industries without limit of existing character.