• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.4
• /
• pp.285-292
• /
• 2017

We investigated physicochemical properties of puffed snacks with intermediate and high amylose rice varieties. The intermediate amylose rice varieties 'Sindongjin' and high amylose rice varieties newly developed for food processing, 'Dodamssal' and 'Goami4' were tested for this study. The crude fat and crude protein contents of the rice cultivars ranged 1.47-3.08% and 6.30-7.63%, respectively. The resistant starch and amylose contents of Dodamssal and Goami4 were higher than those of Sindongjin. The hardness of rice was the highest in Sindongjin and Dodamssal. Also, Hardness of puffed snacks decreased by 72.07% for Sindongjin, 88.21% for Dodamssal and 66.67% for Goami4 compared to raw rice samples. The sensory evaluation showed that the highest scores in taste, texture and overall acceptability of puffed snacks were obtained in Dodamssal. The results of this study indicate that Dodamssal was suitable varieties for puffed snacks. Also, the physicochemical properties of Dodamssal were improved by the extrusion process. Therefore Dodamssal can be used for the industrial production of puffed snacks.

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.1048-1056
• /
• 2002

Quality of fresh ginger deteriorates rapidly during low temperature storage, and its storage life is short due to sprouting and microbial spoilage. The objectives of this research were to develop, using additives, a minced ginger product, which could maintain acceptable quality for over 30 days, and to investigate its quality changes during the cold storage. Storage stability of minced ginger product was investigated from the standpoint of the inhibition of brown discoloration, gas formation and liquid-solid separation. Fresh ginger was peeled and ground to produce minced ginger (control). Sodium bisulfite, L-cysteine, NaCl, sodium benzoate, modified starch, and/or xanthan gum were added to the control to minimize quality loss during storage, and to develop an optimum formula (A) of minced ginger. Samples were packed in Nylon/PE films, stored at $5^{\circ}C$, sampled at a 30-day interval, and subjected to quality evaluations. Changes in pH, surface color, gas formation, liquid-solid separation, contents of free amino acids, free sugars, organic acids, and fatty acids were determined. Gas formation was effectively inhibited in samples with sodium benzoate and/or NaCl. Samples with xanthan gum did not result in liquid-solid separation. L-Cysteine and sodium bisulfite were effective in controlling discoloration. pH decreased during storage in all samples, except sample A. Organic acid contents of all samples increased during storage, with lactic acid content showing the highest increase. Free amino acid content decreased with increasing storage time. Free sugar content of all samples decreased during storage. Sensory results showed sample A maintained acceptable quality until 90 days of storage. These results suggest that quality of minced ginger could be successfully maintained with the additions of selected additives for up to 90 days.

• Food Science and Preservation
• /
• v.17 no.5
• /
• pp.733-740
• /
• 2010

Brown rice vinegars were prepared by agitated or static acetic acid fermentation using different yeast strains (Saccharomyces kluyveri DJ97, Saccharomyces cerevisiae JK99, Saccharomyces cerevisiae GRJ, or Saccharomyces cerevisiae H9). Organic acid contents and levels of volatile compounds were compared in vinegars prepared by different methods. The chosen yeast strain did not significantly affect the organic acid content of vinegar. In vinegars prepared by agitated acetic acid fermentation, organic acid contents were, in the order of descending abundance, acetic acid, citric acid, lactic acid, oxalic acid, and tartaric acid. In vinegars prepared by static acetic acid fermentation, no citric acid was detected, and lactic acid content was higher than that in agitated acetic acid fermented vinegar. The volatile compounds of both vinegars, analyzed by GC-MS, did not significantly differ when various yeast strains were used. Eighteen volatile compounds were detected in vinegar prepared by agitated acetic acid fermentation and 11 in vinegar prepared by static fermentation. Volatile compounds that can affect vinegar quality, including ethyl acetate and phenethyl acetate, were present at high concentrations in static acetic acid fermented vinegar. Electronic nose analysis showed that volatile chemical patterns differed between the two types of vinegar, but there were no significant differences in sensory scores between vinegars prepared using various yeast strains or by either of the two methods of fermentation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.1-11
• /
• 2021

Lately, the Korean Government has gradually expanded participation by local residents who are users of the area in the smart city project for the construction of region specialization smart city service (hereinafter called "Smart Service") and the enhancement in the citizen's awareness. However, due to the lack of information on smart service-related technology, there has been a limitation in getting the specific opinion of citizens in the process of designing the Smart Service. In this study, reports made by 4 four local governments which were selected for implementation of 2019 "Smart Town Challenge Projects" were reviewed to diagnose the actualization level of the smart service suggested by citizens through the living lab. The analysis results show that though the smart service plan was established by using diverse design thinking methodology through the living lab, there was a limitation in having citizens design the specific functions of the smart service. So, this study suggests the function issue card technique which can be used by modulating and freely combining four elements such as information collection, processing, supplying method and technique of the smart service and the service contents. This function issue card technique was directly applied to the living lab of the smart city project to verify its effectiveness. It was found that through this technique, citizens can combine the functions and contents of the smart service to materialize smart services at the level of detailed functions. The function issue card technique suggested in this study is expected to contribute to the actualization of opinions for the role of citizens as co-creators in solving local problems in the citizen participation type smart city plan in the future, thus helping the design of the regional specialization smart service.

• Journal of Mushroom
• /
• v.18 no.4
• /
• pp.357-364
• /
• 2020

The grade and price of Lentinula edodes largely differs in preference depending on the product area and seasonal factors. The product amount of autumn L. edodes was higher than that of spring L. edodes, but high quality, which is divided into "Hwago" is low in preference. Mostly, the autumn L. edodes is obtained as powder; hence, it is necessary to develop a processing method to utilize its flavor and aroma at an affordable price. Additionally, we estimated the content of 𝛽-glucan, ergosterol, vitamin D₂, reducing sugars, and free amino acids and evaluated the anti-inflammatory activity of saccharification powder of log-cultivated L. edodes. In the saccharification powders obtained via 7 min of UV irradiation of log-cultivated L. edodes, 𝛽-glucan and vitamin D₂ contents were found to be the highest, whereas ergosterol content was found to be the lowest. The content of reducing sugars ranged from 62.4 mg/L to 68.2 mg/L. The free amino acids were higher in these saccharification powders than in the control. Subsequently, RAW 264.7 cells were treated with different concentrations (10, 50, 100, 200, 300, and 500 ㎍/mL) of the saccharification powders of log-cultivated L. edodes obtained via different UV irradiation time applications. The cells showed good viability; the anti-inflammatory effect was found to be the highest at 7 min UV irradiation. Therefore, 7 min of UV irradiation was determined to be the optimum condition for manufacturing saccharification powders of log-cultivated L. edodes. Hence, saccharification powders of log-cultivated L. edodes may be used as a raw material for natural sweeteners, food additives, and in the food industry.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.4
• /
• pp.518-524
• /
• 1995

In this study physicochemical characteristics such as crude lipid, crude protein and total sugar contents have been analyzed with samples taken at different developing stages and growing sites, Bongsan-ri(steam-roasted green tea) and Buchun-ri(roasted green tea) area. Leaf area of new leaf was larger in Buchun-ri(7.23cm$^2$) than in Bongsan-ri(6.93cm$^2$). Variation of leaf area by the developing stages was the largest at between stage II (May 5) and stage III(May 18). Dry matters ratio of tea leaf were 26.3% in Bongsan-ri and 26.6% in Buchun-ri. Water content, ash, water-soluble matters, total sugar content of green tea sampled in Bongsan-ri and Buchun-ri were 5.6, 6.1, 33.1, 4.6 and 6.2, 5.8, 35.2, 2.8%, respectivley. Crude lipid, total nitrogen and water-soluble protein, inorganic matters content of green tea sampled in Bongsan-ri and Buchun-ri were 2.8, 5.1, 1.1, 2.56 and 2.2, 5.7, 1.0, 2.34%, respectively. At the later developing stages crude lipid, total sugar contents were increased, whereas total nitrogen had low content. Vitamin C, Vitamin E and Vitamin A content of green tea produced in Bongsan-ri and Buchun-ri area were 413mg%, 71.8mg%, 32.15IU and 311mg%, 52.3mg%, 25.68IU, respectively. Vitamin C and Vitamin E content were increased toward the later sampling stages. Water-soluble matters and water-soluble protein content of green tea prepared by the steam-roasted method and the roasted method were increased by 0.11, 0.13 and 0.09, 0.08%, respectively, compared to unroasted check. Crude lipid content of green tea prepared by the steam-roasted method and the roasted method were decreased by 0.13 and 0.24%, respectively. Total nitrogen content of green tea prepared by the steam-roasted method and the roasted method was changed 0.019 and 0.036%, respectively and total nitrogen content showed minute different between two methods.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.3
• /
• pp.264-274
• /
• 1993

This study was carried out to assess the agronomic characters and physicochemical properties of floury and chalky-endosperm mutant lines induced by chemical mutagen treatment to rice varieties, Hwacheongbyeo and IR24. Linkage analysis of a floury-endosperm gene was carried out using linkage testers. The grain size of brown rice of the mutants was smaller than that of the original varieties. The l, 000-grain and 1$\ell$ weight were lighter in the mutants compared with those in the original varieties. The compound starch granules in the endosperm cell of the mutants showed a loosely-packed crystalline structure. Amylose contents in mutants ranged from 16.9 to 28.5%. Crude protein contents of the mutants were not significantly different from the original rice variety, Hwacheongbyeo, but white core mutant(line 47106) derived from IR24 showed higher protein(l1.32%) compared with IR24(8.30%). The mutants showed slightly harder gel characteristics, and much lower viscosity in Amylograph than original varieties. Steamed rice-cakes from mutant lines showed greater volume than those from original varieties. During the process of alcohol fermentation, Brix in the mutants(especially floury mutants) decreased faster and the alcohol production after 10-day fermentation was much greater in the mutants than in the original varieties. Three different gene loci for floury endosperm characteristics were identified from the allelism test among mutant lines, and the genes were tentatively symbolized as flo-a, flo-b and flo-c, respectively. A floury gene, flo-a, was linked with lg(liguleless) gene in the linkage group N, with R.V. 5.76$\pm$1.72%.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.1
• /
• pp.82-108
• /
• 2024

With the transition of archaeological recording method's transition from analog to digital, the 3D scanning technology has been actively adopted within the field. Research on the digital archaeological digital data gathered from 3D scanning and photogrammetry is continuously being conducted. However, due to cost and manpower issues, most buried cultural heritage organizations are hesitating to adopt such digital technology. This paper aims to present a digital recording method of relics utilizing open-source software and photogrammetry technology, which is believed to be the most efficient method among 3D scanning methods. The digital recording process of relics consists of three stages: acquiring a 3D model, creating a joining map with the edited 3D model, and creating an digital drawing. In order to enhance the accessibility, this method only utilizes open-source software throughout the entire process. The results of this study confirms that in terms of quantitative evaluation, the deviation of numerical measurement between the actual artifact and the 3D model was minimal. In addition, the results of quantitative quality analysis from the open-source software and the commercial software showed high similarity. However, the data processing time was overwhelmingly fast for commercial software, which is believed to be a result of high computational speed from the improved algorithm. In qualitative evaluation, some differences in mesh and texture quality occurred. In the 3D model generated by opensource software, following problems occurred: noise on the mesh surface, harsh surface of the mesh, and difficulty in confirming the production marks of relics and the expression of patterns. However, some of the open source software did generate the quality comparable to that of commercial software in quantitative and qualitative evaluations. Open-source software for editing 3D models was able to not only post-process, match, and merge the 3D model, but also scale adjustment, join surface production, and render image necessary for the actual measurement of relics. The final completed drawing was tracked by the CAD program, which is also an open-source software. In archaeological research, photogrammetry is very applicable to various processes, including excavation, writing reports, and research on numerical data from 3D models. With the breakthrough development of computer vision, the types of open-source software have been diversified and the performance has significantly improved. With the high accessibility to such digital technology, the acquisition of 3D model data in archaeology will be used as basic data for preservation and active research of cultural heritage.

• Korean Journal of Food Science and Technology
• /
• v.48 no.2
• /
• pp.133-141
• /
• 2016

The physicochemical properties, antioxidant capacities, and sensory optimization of taro (Colocasia esculenta) under different aging conditions were investigated to develop black taro. Black taro was processed in three steps (steaming: $95{\pm}3^{\circ}C$ for 1 h; aging: 85, 90, $95^{\circ}C$ for 20, 40, and 60 h; drying: $60^{\circ}C$ for 24 h) and ground into a powder for all experiments. Black taro showed an increased crude fiber content and browning index compared to raw taro. Calcium oxalate contents, reducing sugar contents, moisture contents, and lightness values were decreased during the processing of taro. Improvements in total polyphenol content and antioxidant activity (DPPH, ABTS, FRAP) were observed in the black taro samples aged at higher temperature. Response surface methodology was used for sensory optimization, and the optimum aging conditions with the highest acceptance values were found to be $88.73^{\circ}C$ for 39.50 h for taste, and $88.82^{\circ}C$ for 42.60 h for overall acceptance.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.12
• /
• pp.1769-1775
• /
• 2016

Aerial parts (leaves and stems) of radish are usually discarded due to the distinct undesirable flavors associated with inappropriate preparations, despite their many health benefits. In this study, we examined the role of extrusion process in the removal of off-flavors and elevation of antioxidant activity in radish (Raphanus sativus L.) leaves and stems. To optimize the extrusion conditions, we changed the barrel temperature (110, 120, and $130^{\circ}C$), screw speed (150, 200, 250, and 300 rpm), and moisture content (20, 25, and 30%). The polyphenol and flavonoid contents significantly increased in extruded radish leaves and stems (ER) under optimum extrusion conditions ($130^{\circ}C$, 250 rpm, and 20%). Under extrusion conditions, we compared off-flavors (as amount of sulfur-containing compound) levels between ER and non-extruded radish leaves and stems (NER) by an electronic nose. A total of six peaks (sulfur-containing compound) were similarly detected in both ER and NER, whereas the ER showed reduced off-flavors. Levels of glucosinolate (${\mu}g/g$), which can be hydrolyzed into off-flavors during mastication or processing, were significantly decreased in the ER. From these results, extrusion processing can be an effective method to increase anti-oxidant activity and removal of off-flavors in radish leaves and stems.