• 한국실내디자인학회논문집
• /
• 제18권2호
• /
• pp.3-15
• /
• 2009

In the swirl of change in the world, Media, the development of information technology, and the enterprise-oriented capitalism have tied the world as one unit, and have entered the period of adaptation. With the view of introspection of these concepts, this paper is mainly written by the theory of "matter as the content" with exploration of the design of essence and scientific approach. The design process is the condensational process which is developed by the exchange of reason and sensibility. This process, which is characterized by the objective manipulation of a given condition and the intervention of extrapolation, is the new way of thinking and approach rather than the concept of the way and means. The research of this paper is based on paintings and the analysis of essential experiments in design, the definition of the terms of content in the view of philosophy and design, and the analysis of the cases in architecture and spacial design. As a result, this paper shows that these designs are not just "Simulacre" but the essential eidos, and "content" is the core of these designs which can produce prototype as machine. Also, these designs can relatively be the persuasive methodology for the reflexive modernization.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1061-1064
• /
• 2008

A completion of settling process takes a lot of time for dredged materials of high moisture content, such as contaminated sludge, in landfill site. In general, additives (e.g. flocculants) are used for reducing settling time of such colloidal material, which results in the increase of sludge volume, and hence much space is required in landfill site. This study is to suggest alternative method in order to enhance the settling process of cohesive clayey soils. A number of gravitational sedimentation tests as well as electrokinetic experiments were conducted to investigate the variation of initial moisture content on the settling behaviour of clay slurry. Surface settlement, electric current and local voltage gradient were monitored during the experiment, and moisture content and soil pH were measured after the experiment. From the results, the application of electrokinetics was found to be effective in volume reduction (i.e. increase of settling velocity and decrease of final moisture content) by comparison with gravitational settling process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1155-1156
• /
• 2006

In this paper, we analyzed the effect of EVA Sheet Gel Content depending on curing condition for photovoltaic module. Gel Content was measured by manufacturing Glass/EVA Sheet/Back Sheet scheme at several curing temperature and curing time. And the surface analysis of EVA Sheet depending on process condition could be observed using SEM(Scanning Electron Microscope). Through this experiment, we could confirm that there are differences on Gel Content of EVA Sheet and surface configuration depending on curing temperature and curing time. To find out the optical characteristic dependency on curing condition, Class/EVA Sheet/Glass scheme was fabricated. The optical transmittance of EVA Sheet at visible wavelength was enhanced 5% when compared to Glass/Glass scheme. And the transmittance of $130^{\circ}C$/4min, $110^{\circ}C$/4min, $160^{\circ}C$/6min process condition was higher at ultraviolet wavelength range. These curing conditions could be regarded as the best process for suppression the discoloration speed of EVA Sheet under UV light.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권4호
• /
• pp.198-205
• /
• 2022

Along with a variety of coding education, physical computing education for controlling various sensors is being actively conducted for elementary, middle, and high school students in line with the era of the fourth industrial revolution. A problem with physical computing education using Arduino is pin connection errors between Arduino and various sensors. Most of the students who come into contact with the Arduino for the first time often do not know the purpose of the Arduino pin and the connection position of the pin. Also, hardware built with incorrect pin connections to the Arduino board often does not work properly. If this case continues, students will lose interest in coding education. Therefore, in this paper, we implemented an augmented reality application that informs the connection process of the Arduino board and the sensor during physical computing coding education using Arduino, and designed and implemented educational content for the Arduino pin position and connection process. First, we explain the role of the Arduino board and the sensor and the location of the pins. After that, the students run the educational augmented reality educational content using their smartphones and check the correct pin connection process between the Arduino and the sensor. In the physical computing education, augmented reality content is used to increase the understanding and immersion of the class. It is expected that the educational effect will also increase by inducing fun and interest in physical computing coding education.

• 한국환경농학회지
• /
• 제41권3호
• /
• pp.206-216
• /
• 2022

BACKGROUND: Dithiocarbamate fungicide propineb can be analyzed quantitatively by derivatization reaction followed by HPLC/UVD, which has high reproducibility and stability. However, the presence of high protein in soybeans and peas affects the derivatization process resulting in extremely low recoveries. Therefore, this study was conducted to improve the analytical method for analysis of propineb in soybeans and peas by applying a deproteinization process using chloroform-gel method. METHODS AND RESULTS: The deproteinization process was carried out up to 6 times for soybeans and 5 times for peas using 50 mL chloroform. After 4 times of deproteinization process followed by a derivatization reaction with methyl iodide, the recovery yields of propineb in both pulses were >90%. However, the recovery yield tended to decrease when the deproteinization process was performed more than 5 times. The method limit of quantification (LOQ) was 0.04 mg/L. The recovery conducted in triplicate at 10 times and 50 times of the LOQ ranged from 87.2 to 95.0 % with a coefficient of variation <10%. CONCLUSION(S): This study confirmed that 4 times of deproteinization process using the chloroform-gel method was effective when derivatizing and analyzing dithiocarbamate fungicides in pulses with high protein content. However, depending on the initial protein content present in the pulses, there was a difference in the recovery: the lower the protein content, the higher the recovery rate of propineb. It is expected that the method proposed in this study could be applied to remove high content of protein as analytical interference substance from agricultural samples.

• 한국식품저장유통학회지
• /
• 제14권5호
• /
• pp.451-456
• /
• 2007

압출성형 공정변수(배럴온도, 수분함량) 및 포장방법과 저장기간에 따른 압출성형 매트릭스 내부 비타민 C 함량변화와 손실속도상수를 분석하였다. 압출성형 매트릭스는 배럴온도(80, 90, 100 및 $110^{\circ}C$)와 수분함량(25, 30%)을 각각 조절하여 제조하였다. 비타민 C 함량은 배럴온도가 $80^{\circ}C$에서 $110^{\circ}C$로 증가할수록 감소하였고 수분함량이 25%에서 30%로 증가할수록 감소하였다. ON 필름진공포장과 LDPE 플라스틱필름포장 모두 배럴온도와 수분함량이 증가할수록 비타민 C는 감소하였고 LDPE 플라스틱필름포장 보다는 ON 필름진공포장의 비타민 C 함량이 높았다. 저장기간이 5주차로 증가함에 따라 비타민 C 함량은 감소하였다. 압출성형 원료가 압출성형 매트릭스보다 비타민 C함량의 차이가 더 큰 것을 볼 수 있었으며 압출성형 매트릭스가 파괴율도 낮았다. ON 필름진공포장과 LDPE 플라스틱필름포장 모두 온도가 증가할수록 손실속도상수는 증가하는 경향을 나타내었고 LDPE 플라스틱필름포장보다 ON 필름진공포장이 손실속도상수가 2배 이상 낮게 나타났으며 온도가 $100^{\circ}C$로 증가할수록 손실속도상수는 2배 이상 증가하는 것으로 나타났다. 온도가 높을수록 수분함량이 많을수록 비타민 C 함량이 감소하는 것은 균일한 기공의 분포와 셀 벽의 두께 감소에 의한 표면적의 증가 때문에 매트릭스 내부의 비타민 C의 손실속도가 증가한 것으로 판단되었다.

• 한국콘텐츠학회논문지
• /
• 제12권9호
• /
• pp.40-47
• /
• 2012

미디어 아트는 새로운 경로의 인식과 지각을 동반하고, 기존의 미술과는 다른 인간의 신체를 도구화 하여 상호작용을 만들어내는 새로운 감상방식을 제안한다. 시각적인 영상을 제작하는 방식 중 포인트 클라우드는 점으로 형태를 표현한다는 점에 있어 서양미술의 점묘법과 유사하며 이는 전통회화 기법을 디지털 기술을 활용해 재구성한다는 의미를 가진다. 본 논문에서는 미학적 요소와 디지털 기술을 융합한 새로운 감상방식으로 포인트 클라우드 형태의 영상을 제작하여 홀로그램 필름에 투사하고, 관람자의 손짓이 영상과 상호작용하는 콘텐츠를 제시한다. 콘텐츠 제작은 콘텐츠 제작 배경 의도를 기획하고 포인트 클라우드 형태의 이미지 제작, 상호작용을 위한 3D 제스처 디자인 과정을 거쳐 최종적으로 홀로그램 필름에 투사하는 과정을 거친다. 콘텐츠는 사람의 의식 속에서 일어나는 기억의 회상 과정을 시각적, 체감적으로 표현한다. 이를 위해 기억의 회상 과정을 불확실한 기억, 기억의 구체화, 완전한 회상으로 설정하였다. 불확실한 기억은 포인트 클라우드 형태의 이미지를 통해 모호한 형태의 이미지로 표현되고, 상호작용으로 이미지를 조작하는 행위를 통해 기억을 구체화 해 나가면서 완전한 회상을 하게 된다.

• 한국물환경학회지
• /
• 제18권2호
• /
• pp.123-130
• /
• 2002

Bench scale experiments were carried out with two biological nutrient removal(BNR) units, A/O and $A^2O$ processes, to investigate the behavior of phosphorus in the system and to compare the characteristics of phosphorus removal in two BNR processes. To achieve this goal, COD/T-P and COD/TKN ratios of the influent was varied in the range of 23~64 and 5~24, respectively. In A/O process, influent COD/T-P ratio should be kept higher than 44mg/L to meet the final effluent T-P concentration lower than 1mg/L and in $A^2/O$ process, influent COD/T-P and COD/TKN ratios higher than 56 and 10, respectively, were required for good phosphorus release and uptake with no influence of nitrate nitrogen in return sludge. At this conditions, the rate of phosphorus release in the anaerobic basin should be kept higher than 0.1 kg S-P/kg MLVSS d In A/O process, the phosphorus content of anaerobic and aerobic sludges was increased as SRT of total system was becoming longer resulting in decreasing the difference of phosphorus content between two sludges while phosphorus release in anaerobic basin and phosphorus uptake in aerobic basin was not incident. In $A^2/O$ process, the phosphorus content of anaerobic and aerobic sludges were not increased with higher SRT of total system due to the relatively high nitrate concentration in return sludge. However, the difference of phosphorus content between anaerobic and aerobic sludges was incident when phosphorus release and uptake was observed.

• 한국산업융합학회 논문집
• /
• 제25권1호
• /
• pp.21-26
• /
• 2022

When garlic is aged for a certain period of time while maintaining proper humidity, it causes a browning reaction by its own ingredients and enzymes. In this study, the physicochemical properties were analyzed by varying the temperature conditions for aging garlic. It was found that about 20% of the weight of garlic was reduced through the aging process. During the aging process, both samples showed the highest water content on the 10th day of aging, and the water content of the two samples was similar after the aging was completed. In the analysis of total sugar content change, AG1 (22.0±0.7 vs 21.4±0.6) showed a significantly higher sugar content on the 10th day of aging, but showed a tendency to gradually decrease thereafter, whereas AG2 showed a steady increase in sugar content during the aging process (18.7 < 21.4 < 21.7 < 22.3 < 23.7). The pH change that occurred during the aging process showed the most pH change on the 10th day. In AG1, the pH gradually decreased as the aging period increased, whereas in AG2, the pH increased significantly after the 10th day. In the analysis of browning, AG1 increased sharply on the 10th day and maintained the state, and AG2 showed a significant increase in browning according to the aging process. In conclusion, based on the results of this study, if various ripening temperature conditions are set, it is judged that it will play a positive role in improving the productivity of black garlic.

• 한국가구학회지
• /
• 제10권2호
• /
• pp.29-36
• /
• 1999

During a radio-frequency/vacuum plus press drying process of some hardwood veneers for decoration we investigated the effect of a grain and thickness of a veneer sheet on drying rates, variations of final moisture content within a bundle of veneer sheets, and formation of checking, end waving, and burning mark. About thirty three hundreds sheet of veneer could be dried in sixty five hours from green to in0-use moisture content, and a final moisture content was significantly effected by initial moisture content of veneer. There were nearly variations in a final moisture content among the veneer sheets in the same bundle. A checking was never found in a edge-sliced veneer, and very slight in a flat-sliced veneer of ash and red oak. There were no end waving and no burning mark in all veneer sheets.