• 한국도로학회논문집
• /
• 제9권4호
• /
• pp.93-104
• /
• 2007

본 연구는 포장재로서 투수콘크리트의 실질적인 현장적용을 위한 자료제시와 성능향상 방안을 도출하기 위하여 슬래그골재와 플라이애시의 혼입률에 따른 포장용 투수콘크리트의 역학적 특성을 평가하였다. 시험결과, 포장용 투수콘크리트의 공극률 및 투수계수는 슬래그골재의 혼합비율이 증가함에 따라 증가하고 플라이애시 혼입률 증가에 의하여 감소하는 경향을 나타내었으며 국내 포장용 투수콘크리트에 관한 규정(8% 및 0.01cm/sec)을 만족하였다. 압축강도 및 휨강도는 슬래그골재의 혼입률이 증가함에 따라 감소하였으나, 플라이애시의 혼입률이 증가함에 따라 크게 증가하는 경향을 나타내어 플라이애시를 5% 이상 혼입하면 슬래그골재를 50% 사용한 경우에도 국내 포장콘크리트에 관한 규정(18MPa 및 4.5MPa 이상)을 만족하였다. 또한 강섬유를 0.75vol.% 혼입한 경우 사용하지 않은 경우에 비하여 휨강도가 22.8% 증가 하였다. 미끄럼저항성은 슬래그골재의 혼입률이 증가에 따라 BPN값은 증가하였고, 플라이애시의 혼입률 증가에 의해 BPN값은 감소하는 경향을 나타내었으며, 내마모성 및 동결융해저항성은 부순골재만을 사용한 경우에 비해 슬래그골재의 혼합비율이 증가함에 따라 감소하였고, 플라이애시를 10% 혼입한 경우에는 현저히 개선되어 혼입하지 않은 경우에 비하여 내마모성 및 내동해성이 각각 약 5.6% 및 14.3% 정도 개선되는 것으로 확인되었다.

• Structural Engineering and Mechanics
• /
• 제5권4호
• /
• pp.399-414
• /
• 1997

This paper presents an investigation into the seismic response characteristics of a proposed ligh-weight pedestrian cable-stayed bridge made entirely from Glass Fiber Reinforced Plastics(GFRP). The study employs three dimensional finite element models to study and compare the dynamic characteristics and the seismic response of the GFRP bridge to a conventional Steel-Concrete (SC) cable-stayed bridge alternative. The two bridges were subjected to three synthetic earthquakes that differ in the frequency content characteristics. The performance of the GFRP bridge was compared to that of the SC bridge by normalizing the live load and the seismic internal forces with respect to the dead load internal forces. The normalized seismically induced internal forces were compared to the normalized live load internal forces for each design alternative. The study shows that the design alternatives have different dynamic characteristics. The light GFRP alternative has more flexible deck motion in the lateral direction than the heavier SC alternative. While the SC alternative has more vertical deck modes than the GFRP alternative, it has less lateral deck modes than the GFRP alternative in the studied frequency range. The GFRP towers are more flexible in the lateral direction than the SC towers. The GFRP bridge tower attracted less normalized base shear force than the SC bridge towers. However, earthquakes, with peak acceleration of only 0.1 g, and with a variety of frequency content could induce high enough seismic internal forces at the tower bases of the GFRP cable-stayed bridge to govern the structural design of such bridge. Careful seismic analysis, design, and detailing of the tower connections are required to achieve satisfactory seismic performance of GFRP long span bridges.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.695-702
• /
• 2002

Shotcrete (or Sprayed concrete) has been used as an important support material in New Austrian Tunnelling Method (NATM). Since the mid of 1990, permanent shotcrete tunnel linings such as Single-shell, NMT (Norwegian Method of Tunnelling) has been constructed in many countries for reducing the construction time and lowing construction costs instead of conventional in-situ concrete linings. Among essential technologies for successful application of permanent shotcrcte linings, high performance shotcrete providing high strength, high durability, better pumpability has to be developed in advance as an integral component. This paper presents the Ideas and first experimental attempts to increase early strength and bond strength of wet-mixed Steel Fiber Reinforced Shotcrete(SFRS) in sump water condition. In order to increase early strength, a new approach using high-early strength cement with liquid alkali-free accelerator has been investigated From the results, wet-mix SFRS with high-early strength cement and alkali-free accelerator exhibited excellent early strength improvement compared to the ordinary portland content and good bond strength even under sump water condition.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.239-246
• /
• 1999

recently there have been many destructive seismic events in Kobe Japan in 1995 and in Northridge California USA in 1994. etc. The Korean Bridge Design Standard Specifications adopted the seismic design requirements in 1992. Comparing the earthquake magnitude in Korea with those in the west coast of the USA it may be said that the current seismic design requirements of the Korean Bridge Design Standard Specifications provides too conservation design results especially for transverse reinforcement details and amount in reinforced concrete columns. This fact usually makes construction problems in concrete casting due to transverse reinforcement congestion. And the effective stiffness Ieff depends on the axial load P(Ag{{{{ {f }_{ck } }}) and the longitudinal reinforcement ratio Ast/Ag and it is conservative to use the effective stiffness Ieff than the gross section moment Ig. Seismic design for transverse reinforcement content of concrete column is considered of extreme-fiber compression strain R-factor axial load and stiffness etc.

• 한국건축시공학회지
• /
• 제24권5호
• /
• pp.577-585
• /
• 2024

철근콘크리트 구조물은 여러 환경에 의해 콘크리트 중성화 및 주위 염화물로 인해 철근 부식이 발생하는 문제점을 가지고 있다. 철근의 부식으로 인해 콘크리트 균열이 발생되며, 내구성을 저하시키는 문제점이 있다. 이를 해결하기 위해 FRP에 대한 연구가 지속적으로 수행되고 있다. FRP 종류 중 CFRP는 높은 인장강도와 탄성계수가 뛰어나다는 장점이 있으며, 내식성과 내후성이 우수하다는 특징을 가지고 있다. 이러한 CFRP에 대한 데이터는 미비한 실정이며, 본 연구는 철근콘크리트 구조물에 적용하기 위한 기초적인 데이터를 제공하기 위해 수행된 것이다. 본 연구의 범위 내에서는 콘크리트 함수상태에 따라서 수중양생의 부착강도 시험체가 기건양생의 부착강도 시험체보다 높은 부착강도를 보였다.

• Steel and Composite Structures
• /
• 제51권3호
• /
• pp.337-349
• /
• 2024

The growing quantity of tires and building trash piling up in landfills poses a serious threat to the stability of the ecosystem. Researchers are exploring ways to reduce and use such byproducts of the construction industry in an effort to promote greener building practices. Thus, using recycled crumb rubber from scrap tires in concrete manufacturing is important for the industry's long-term viability. This study examines the proportion of waste rubber in fiber form, specifically at weight percentages of 5%, 10%, and 15%. Moreover, the study examines the shear behavior of reinforced concrete beams. A total of twelve RC beam specimens, each sized 100 mm by 150 mm by 1000 mm (w × d × L), were constructed and positioned to the test. Various mixtures were designed with different levels of scrap tire rubber content (0%, 5%, 10%, and 15%) and Stirrup Vol. Ratio (2.10, 2.80, and 3.53) in reinforced concrete beams. The findings indicate that the inclusion of scrap rubber in concrete leads to a decrease in both the mechanical characteristics and weight of the material. This is mostly attributed to the lower strength and stiffness of the rubberized concrete. Furthermore, estimations generated by a variety of design codes were examined alongside the obtained data. In order to make a comparison between the estimates provided by the different codes such as ACI 318-14, CEB-FIB and Iranian national building codes, a calculation was done to determine the ratio of the experimental shear strength to the anticipated shear strength for each code.

• Steel and Composite Structures
• /
• 제24권2호
• /
• pp.191-200
• /
• 2017

Impact resistance and weight are important features for ballistic materials. Kevlar fibres are the most widely reinforcement for military and civil systems due to its excellent impact resistance and high strength-to-weight ratio. Kevlar fibres or spectra fiber composites are used for designing personal body armour to avoid perforation. In this study, the ballistic impact behaviour of Kevlar/filled epoxy matrix is investigated. Three different fillers, nanoclay, nanocalcite and nanocarbon, were used in order to increase the ballistic impact performance of Kevlar-epoxy composite at lower weight. The filler, nanoclay and nanocalcite, content employed was 1 wt.% and 2 of the epoxy resin-hardener mixture while the nanocarbon were dispersed into the epoxy system in a 0.5%, 1% and 2% ratio in weight relating to the epoxy matrix. Specimens were produced by a hand lay-up process. The results obtained from ballistic impact experiments were discussed in terms of damage and perforation. The experimental tests revealed a number of damage mechanisms for composite laminated plates. In the ballistic impact test, it was observed whether the target was perforated completely penetrated at the back or not. The presence of small amounts of nanoclay and nanocalcite dispersed into the epoxy system improved the impact properties of the Kevlar/epoxy composites. The laminates manufactured with epoxy resin filled by 1 wt.% of nanoclay and 2 wt% nanocalcite showed the best performance in terms of ballistic performance. The addition of nanocarbon reduced ballistic performance of Kevlar-epoxy composites when compared the results obtained for laminates with 0% nanoparticles concentration.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권3호통권55호
• /
• pp.173-180
• /
• 2009

초속경 라텍스개질 콘크리트는 교량바닥판 보수 후 조기교통개방을 가능하도록 하기위해 개발되었다. 본 논문의 목적은 초속경 라텍스개질 콘크리트에 발생하는 망상형, 횡방향 및 종방향 균열에 대한 원인을 분석하여 균열발생을 최소화 할 수 있는 방안을 마련하고, 현장 시험시공을 통하여 균열 억제방안을 검증하는 것이다. 횡방향 균열발생을 최소화하기 위하여 시멘트 성능의 개선과 더불어 단위시멘트량을 390kg/$m^3$에서 360kg/$m^3$으로 줄이고 굵은 골재의 최대치수를 13mm에서 19mm로 변경하였다. 시공측면에서 망상형 균열발생을 억제하기 위하여 강섬유와 와이어 메시를 사용하였고, 콘크리트 타설 직후 양생이 이뤄질 수 있도록 하였다. 검증실험 대상교량의 현장 균열조사결과 미세한 크기의 횡방향 균열과 종방향 균열을 제외하면, 3년 동안 구조적 균열이 발생하지 않은 것으로 조사되었다. 따라서 제안된 균열억제 방안이 균열억제에 효과적임을 확인하였다.

• Advanced Composite Materials
• /
• 제17권1호
• /
• pp.25-40
• /
• 2008

The research and development in soundproof materials for preventing noise have attracted great attention due to their social impact. Noise insulation materials are especially important in the field of soundproofing. Since the insulation ability of most materials follows a mass rule, the heavy weight materials like concrete, lead and steel board are mainly used in the current noise insulation materials. To overcome some weak points in these materials, fiber reinforced composite materials with lightweight and other high performance characteristics are now being used. In this paper, innovative insulation sheet materials with carbon and/or glass fabrics and nano-silica hybrid PU resin are developed. The parameters related to sound performance, such as materials and fabric texture in base fabric, hybrid method of resin, size of silica particle and so on, are investigated. At the same time, the wave analysis code (PZFlex) is used to simulate some of experimental results. As a result, it is found that both bundle density and fabric texture in the base fabrics play an important role on the soundproof performance. Compared with the effect of base fabrics, the transmission loss in sheet materials increased more than 10 dB even though the thickness of the sample was only about 0.7 mm. The results show different values of transmission loss factor when the diameters of silica particles in coating materials changed. It is understood that the effect of the soundproof performance is different due to the change of hybrid method and the size of silica particles. Fillers occupying appropriate positions and with optimum size may achieve a better effect in soundproof performance. The effect of the particle content on the soundproof performance is confirmed, but there is a limit for the addition of the fillers. The optimization of silica content for the improvement of the sound insulation effect is important. It is observed that nano-particles will have better effect on the high soundproof performance. The sound insulation effect has been understood through a comparison between the experimental and analytical results. It is confirmed that the time-domain finite wave analysis (PZFlex) is effective for the prediction and design of soundproof performance materials. Both experimental and analytical results indicate that the developed materials have advantages in lightweight, flexibility, other mechanical properties and excellent soundproof performance.