• Korean journal of applied entomology
• /
• v.38 no.1
• /
• pp.47-52
• /
• 1999

Effects of organic matter content in soil on activity. vertical migration. and persistence of two nernaticides. carbofuran and ethoprophos. to root-knot nematode, Mrloitlog!~iei ~lcognita.w ere investigated. As the organic matter content increased. activity of the nernaticides tended to be reduced. Both nematicides exhibited control values of more than 80'k' to M. iix.o,yilit~iln 0-2 cm depth soil layer from the surface. regi~rdless of organic matter content in soil. In 2-4 cm depth soil layer. however. the control value of the neniaticides varied with the organic niatter content in soil. The control value of carbofuran in the soil layer was ranged from I0 to 30'2,. depending on the soil organic niatter content. In contrast. ethoprophos had no control value against M. i/ic.o,ytlitcr in the \oil layer, except that the nematicide had a control value of 30% when the organic matter content was 0.4%. Furthermore. ethoprophos had no effect on controlling M. i/ic.o,gtiitrr in soil layer of below 4cm. whereas control values of carbofuran were approximately from 5 to 20% in all test soils having different organic matter contents. These results indicate that carbofuran has more vertical migration effect than ethoprophos. Persistence of the two neniaticides was also decreased with increasing soil organic matter content. Half life of carbofuran was 2-3 weeks in soil containing 0.4% organic matter, whereas it was found to be I week in soils containning 0.8 ant1 1.6% of organic matter. On the other hand. activity of ethoprophos was reduced to half in 3-3 weeks and in 2-3 weeks in soil containing 0.4 and 0.8%, and 1.6%) of organic matter, respectively. However, no activity of the both nernaticides was found in soil containing 3.2% of organic matter.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.4
• /
• pp.493-503
• /
• 2019

This study is composed of nine treatments [Control : "no neutralizing layer+vegetation layer" 3 cm, Treatment 1 : "no neutralizing layer+vegetation layer" 5 cm, Treatment 2 : "no neutralizing layer+vegetation layer" 7 cm, Treatment 3 :"neutralizing layer (cement 3 %)+ vegetation layer (cement 1 %)" 3 cm, Treatment 4 : "neutralizing layer (cement 3 %)+vegetation layer (cement 1 %)" 5 cm, Treatment 5 : "neutralizing layer (cement 3 %)+vegetation layer (cement 1 %)" 7 cm, Treatment 6 : "neutralizing layer [$(Ca{\cdot}Mg)CO_3$] +vegetation layer" 3 cm, Treatment 7 : "neutralizing layer [$(Ca{\cdot}Mg)CO_3$]+vegetation layer" 5 cm, Treatment 8 : "neutralizing layer [$(Ca{\cdot}Mg)CO_3$]+vegetation layer" 7 cm] to find out the vegetation effects according to neutralizing layer types of the acid drainage slope. There were no significant differences observed in soil hardness and soil moisture content of neutralizing layer type while highly difference of moisture content was observed according to the neutralizing and vegetation layer thickness. As for soil acidity, strong acid was shown in the control, treatment 1 and treatment 2. Neutralizing effects were outstanding in treatments of 3, 4, 5 (cement treatment group), 6, 7 and 8 (limestone treatment group). Concerning plants growth characteristics, surface coverage rates, number of germinating woody plants, plant height, and plant root status, there were excellent effects observed in the experimental groups mixed with cement (treatments 3, 4 and 5) and limestone (treatments 6, 7 and 8). At the initial stage, however, plant roots were negatively affected in cement layer treatments of 3, 4 and 5. However, no difference was shown in each layer thickness on the acid drainage slope whereas 3~5 cm thickness neutralizing layer was appropriate in consideration of economic feasibility.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.169-172
• /
• 2002

In this paper, the design formulas for bandpass filters using parallel coupled stepped impedance resonators(SIR) are derived. General content about basic feature of stepped impedance resonators(SIR) is represented. The filters and duplexer using stepped impedance resonators(SIR) have been designed and realized with the presented design method at IMT-2000 frequency band Simulations have used serenade circuit simulation and HFSS EM-simulation. We were showed excellent agreements between SIR design theory and simulation results on the multi-layer filter/duplexer.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.04a
• /
• pp.186-191
• /
• 1996

The recycled aggregate obtained from the recycled concrete may be used in road construction as crushed aggregate. The properties of recycled aggregate are reached to the values in accordance with specification for the subbase layer of the road construction. However, for the base layer of road construction, the mixtures of recycled aggregate and crushed aggregate have to be used in order to satisfy the specification. In the Batch Leaching Test the recycled aggregate has lower content of heavy matal and organic matter than those written in environmental pollution law. So it does not occur the environmental pollution.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.5
• /
• pp.347-354
• /
• 1997

Composite plating is a method of co-depositing fine particles of metallic, non-metallic compound or polymers in the plated layer to improve material properties such as were-resistance, lubrication, or corrosion resistance. Graded Ni-Sic composite coating were produced in this research. Prior to produce Graded Ni-SiC composite coatings, effects of particle size, particle content, pH of electrolyte, temperature, current density, stirring rate on the amount of SiC deposited in the Ni layer were investigated. By manipulating current density and plating time properties of these coating were evaluated by micro-indentation hardness test.

• The KIPS Transactions:PartA
• /
• v.15A no.4
• /
• pp.199-210
• /
• 2008

A Clustering based wireless internet proxy server needs a layer-7 load balancer with URL hashing methods to reduce the total storage space for servers. Layer-4 load balancer located in front of server cluster is to distribute client requests to the servers with the same contents at transport layer, such as TCP or UDP, without looking at the content of the request. Layer-7 load balancer located in front of server cluster is to parse client requests in application layer and distribute them to servers based on different types of request contents. Layer 7 load balancer allows servers to have different contents in an exclusive way so that it can minimize the total storage space for servers and improve overall cluster performance. However, its scalability is limited due to the high overhead of parsing requests in application layer as different from layer-4 load balancer. In order to overcome its scalability limitation, in this paper, we propose a distributed layer-7 load balancer by replacing a single layer-7 load balancer in the conventional scheme by a single layer-4 load balancer located in front of server cluster and a set of layer-7 load balancers located at server cluster. In a clustering based wireless internet proxy server, we implemented the conventional scheme by using KTCPVS(Kernel TCP Virtual Server), a linux based layer-7 load balancer. Also, we implemented the proposed scheme by using IPVS(IP Virtual Server), a linux-based layer-4 load balancer, installing KTCPVS in each server, and making them work together. We performed experiments using 16 PCs. Experimental results show scalability and high performance of the proposed scheme, as the number of servers grows, compared to the conventional scheme.

• Journal of Korea Foundry Society
• /
• v.4 no.1
• /
• pp.12-20
• /
• 1984

In order to investigate the effect of size of sand grains, bentonite content and moisture on mixing power, standard mixing power, permeability, green compressive strength and green mold hardness were measured with mixing time, and also coated layer of mixed sand with time was observed by optical microscope and scanning electron microscope. From this experiment, the results were summarized as follows. 1. Mixing power increased as size of sand grains decreased. 2. Mixing power increased gradually as bentonite content increased and in particular, increased rapidly in 7-10% bentonite. 3. Mixing power increased as moisture content decreased. 4. The mixing time required to get the optimum mixing power decreased as moisture content and grain size increased, but increased as bentonite content increased.

• Transactions of the Korean hydrogen and new energy society
• /
• v.10 no.4
• /
• pp.197-210
• /
• 1999

The hydrogen storage performance and electrochemical properties of $Zr_{1-X}Ti_X(Mn_{0.2}V_{0.2}Ni_{0.6})_{1.8}$(X=0.0, 0.2, 0.4, 0.6) alloys are investigated. The relationship between discharge performance and alloy characteristics such as P-C-T characteristics and crystallographic parameters is also discussed. All of these alloys are found to have mainly a C14-type Laves phase structure by X-ray diffraction analysis. As the mole fraction of Ti in the alloy increases, the reversible hydrogen storage capacity decreases while the equilibrium hydrogen pressure of alloy increases. Furthermore, the discharge capacity shows a maxima behavior and the rate-capability is increased, but the cycling durability is rapidly degraded with increasing Ti content in the alloy. In order to analyze the above phenomena, the phase distribution, surface composition, and dissolution amount of alloy constituting elements are examined by S.E.M., A.E.S. and I.C.P. respectively. The decrease of secondary phase amount with increasing Ti content in the alloy explains that the micro-galvanic corrosion by multiphase formation is little related with the degradation of the alloys. The analysis of surface composition shows that the rapid degradation of Ti-substituted Zr base alloy electrode is due to the growth of oxygen penetration layer. After comparing the radii of atoms and ions in the electrolyte, it is clear that the electrode surface becomes more porous, and that is the source of growth of oxygen penetration layer while accelerating the dissolution of alloy constituting elements with increasing Ti content. Consequently, the rapid degradation (fast growth of the oxygen-penetrated layer) with increasing Ti substitution in Zr-based alloy is ascribed to the formation of porous surface oxide through which the oxygen atom and hydroxyl ion with relatively large radius can easily transport into the electrode surface.

• Journal of the Korean Society for Heat Treatment
• /
• v.13 no.3
• /
• pp.151-157
• /
• 2000

This study aims to investigate the effect of carbon content on the surface nitrogen permeation of 13%Cr-1.8%Al alloyed stainless steels. The surface nitrogen permeation was performed at $1050^{\circ}C{\sim}1200^{\circ}C$ in the $1kg/cm^2$ nitrogen gas atmosphere. The nitrogen permeated surface layer of the specimen containing 0.03%C consists of AlN, martensite and retained austenite phases. while the surface layer of the specimen containing 0.14%C appears the $AlFe_3C_x$ phase including former three phases. The specimen containing 0.14%C shows lower total case depth than that containing 0.03%C at the nitrogen permeation temperatures of $1050^{\circ}C$ and $1100^{\circ}C$, while the total case depth of the specimen containing 0.14%C is remarkably increased at the temperature of $1150^{\circ}C$ and $1200^{\circ}C$ due to the increase in the retained austenite content. Martensitic phase, AlN and $AlFe_3C_x$ precipitate of the nitrogen permeated surface layer cause to increase the surface hardness of 550~600Hv.

• Journal of the Korean Society for Heat Treatment
• /
• v.11 no.4
• /
• pp.305-314
• /
• 1998

This study has been performed to investigate into some effects of various amounts of $CO_2$ and CO gas added to the $50%NH_3-N_2$ based gas atmosphere on microstructure, hardness, chemical analysis and residual stress in the compound and diffusion layer of AISI H13 treated by gaseous nitrocarburising process. The compound layer formed in the surface is composed of mainly ${\varepsilon}-Fe_3$(N,C) and small amount of ${\gamma}^{\prime}-Fe_4N$ and cementite. The maximum hardness value obtainable from H13 steel is shown to be 1200 Hv and the effecvtive hardening depth increases with increasing CO content from 1% to 4%. In the case of CO content over 4%, however, it decreases with increasing CO content. The composition profiles of nitrogen and carbon are found to be within the ${\varepsilon}$-phase field located above the ${\varepsilon}+{\gamma}^{\prime}$ phase field in the Fe-N-C diagram. It is shown that the maximum value of compressive residual stress of H13 steel treated in atmospheres of $50%NH_3-(2,4)%CO_2-N_2-CO$ gas mixture is $48kg/mm^2$ and the depth to which residual stress is in Compressive state is $90{\mu}m$ for the atmosphere $50%NH_3-45%N_2-4%CO_2-1%CO$ gas mixture. It is consequently important to control the maximum value and size of compressive residual stress region in order to obtain desirable mechanical properties.