• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.4
• /
• pp.538-543
• /
• 2015

This experiment was conducted to measure the effects of olive leaf powder on performance, egg yield, egg quality and yolk cholesterol level of laying hens. A total of 120 Lohmann Brown laying hens of 22 weeks old were used in this experiment. The birds were fed on standard layer diets containing 0, 1%, 2%, or 3% olive leaf powder for 8 weeks. Egg weight and yield were recorded daily; feed intake weekly; egg quality and cholesterol content at the end of the trial. Olive leaf powder had no effect on feed intake, egg weight, egg yield and feed conversion ratio (p>0.05) while olive leaf powder increased final body weight of hens (p<0.05). Dietary olive leaf powder increased yellowness in yolk color (p<0.01) without affecting other quality parameters. Yolk cholesterol content was tended to decrease about 10% (p>0.05). To conclude, olive leaf powder can be used for reducing egg yolk cholesterol content and egg yolk coloring agent in layer diets.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.3
• /
• pp.47-59
• /
• 2023

In this research, laboratory tests were conducted on clayey sand (SC) to analyze its physical properties, compaction/permeability characteristics, and stress-strain behavior. The main objective was to determine the transitional fines content at which the mechanical properties of sand transition to those of clay, resulting in a change in the geotechnical behavior of the material. Additionally, to assess the practical applicability of SC soil, field data from a soft ground improvement site with significant settlement issues were collected. The settlement characteristics derived from laboratory tests and numerical simulations were then compared and analyzed in relation to the actual settlement data obtained from the field, aiming to evaluate the suitability of the SC soil as a compaction target layer. The laboratory tests and compaction analysis showed that the SC soil exhibited a distinct change in mechanical properties, shifting from sandy behavior to clayey behavior when the fines content exceeded 25%. This transition in mechanical behavior was found to be closely correlated with the content of clay particles within the material. Through numerical simulations of the soft ground site, it was verified that the use of clayey sand with a fines content exceeding the transitional level as a compaction target layer resulted in settlements that closely aligned with the measured settlements, with an average agreement of 91.2%. Based on these findings, it is deemed advisable to incorporate clayey sand with a fines content exceeding the transitional level as part of the compaction target layer in the design of soft ground improvements.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.392-398
• /
• 2000

When soft ground improvement is proceeded in costal area using compulsory replacement method, it is very important that the method of stability of embankment above replacement layer can be obtained if non-replaced soft layer is remained, and there are a lot of influence factors which affect the stability of embankment, such as replacement depth, the water content of dredged soil and the width of replacement layer, etc. If soft layer was replaced completely by good quality materials, there would be no problems about stability of embankment, but practically non-replaced layer would be remained as the strength of soft layer will be increased. So another consideration is required to get the stability of embankment. In this study, stability of embankment among these factors was compared, and from that results, the better way that could obtain the stability was presented.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.1
• /
• pp.13-23
• /
• 2009

To intensively analyze and examine the changes in palatability of cooked rice and structural properties of rice grains influenced by increased nitrogen topdressing during the panicle formation and ripening stage, a series of experiments were carried out using three japonica rice cultivars with contrasting rice quality characteristics. The protein content of brown rice increased maximally up to $35{\sim}47%$ of that in standard N6 plot with the increase in nitrogen topdressing fertilizer during 20 days before heading to 10 days after flowering. The high-yielding rice cultivars showing poor palatability of cooked rice revealed larger increase in protein content of rice grains by increased nitrogen topdressing. Under the same nitrogen level of 15 kg per 10a with nitrogen topdressing at 3 kg/10a, high-yielding rice cultivars, Yumehikari and Reihou showed the significant increase in protein content of brown rice when topdressing was applied at 10 days after flowering as compared with when it was applied at 30 days after transplanting. Although the variation in amylose content of milled rice as affected by nitrogen topdressing level was relatively small, it decreased within 1% with the opposite tendency against increased protein content of brown rice by increased nitrogen topdressing. The total score of sensory evaluation was higher in the order of Hinohikari < Yumehikari < Reihou in panel test. It decreased significantly by increased amounts of nitrogen topdressing during 20 days before heading to 10 days after flowering when nitrogen level was higher than 12 kg/10a. The more poor palatable rice cultivar in panel test revealed the larger decreasing in total score of sensory evaluation by higher nitrogen topdressing rates. All sensory evaluation components were largely affected by the change in protein content of brown rice rather than amylose content of milled rice. The influence of protein content to palatability of cooked rice was larger in poor-palatable rice than in high-palatable rice. The protein content decreased drastically from outer layer to inner layer of rice grains, while the amylose content increased on the contrary. The high-palatable rice exhibited higher distribution of protein content on bran layer but lower distribution of protein content on the layer of polished rice as compared with the poor-palatable rice. Especially, the high-palatable rice showed also significantly lower distribution of amylose content on the outer layer of polished rice as compared with the poor-palatable rice.

• Korean Journal of Human Ecology
• /
• v.21 no.2
• /
• pp.377-388
• /
• 2012

The purpose of this study was to determine the content attributes and sensory characteristics of ice cream flavored with lotus leaf and seeds (Nelumbo nucifera Gaertner). Analysis of freeze dried lotus leaf powder produced the following technical results: Freeze dried lotus leaf powder contained moisture 12.2, crude protein 5.9, crude fat 1.2, crude ash 7.0, crude fiber 13.4g/100mg; raw lotus seed powder contained moisture 65.0, crude protein 8.2, crude fat 0.3, crude ash 1.0, crude fiber 10.8g/100mg; freeze dried lotus seed powder contained moisture 14.0, crude protein 17.1, crude fat 1.9, crude ash 4.0, crude fiber 2.8g/100mg. Lotus seed was processed by 4 methods: freeze dried, roasted, freeze dried peeled inner layer, cooked cut peeled inner layer. Analysis of the color value produced the following technical results: freeze dried lotus leaf powder were L(lightness) 14.5, a(redness) 4.4, b(yellowness) 24.0; freeze dried lotus seed powder L 57.3, a 14.4, b 12.0; roasted lotus seed powder L 52.7, a 22.5, b 11.9; freeze dried lotus seed peeled inner layer L 60.0, a 1.4, b 12.3. Proportional lotus ingredients used for ice cream were 1%, 3%, 5%, 7%, 10% for lotus leaves and 1%, 3%, 5% for lotus seeds. The maximum over run ratio for lotus leaf ice cream was 45.3~56.9% at 20~25 minutes operating time. Over run was significantly decreased by increasing the contents of lotus leaf powder. A maximum over run ratio for lotus seed ice cream was 46.1~54.3% at 20~25 operating time. Over run was not significantly different based on content of lotus leaf versus lotus seed. Sensory evaluation of lotus leaf ice cream produced the following results: the highest score was for color of 4.42 and the lowest score was for sweetness of 3.30. The total mean score significantly decreased by increasing the content of lotus leaf powder. Sensory evaluation of lotus seed ice cream produced the following results: the highest score was for cooked cut peeled inner layer type and the lowest was for freeze dried type 3.86. The sensory scores were not significantly different based on the content of lotus seed. Texture was evaluated highest with a rating of 4.21 and the taste was evaluated lowest with a rating of 3.68 For whole evaluation. This study concluded that lotus leaf ice cream demonstrates relative strength in terms of color and taste, and a relative weakness in terms of over run and sweetness. Suitable content of lotus leaf ranged from 1~5%. The lotus seed processed by the cooked cut peeled inner layer method received a higher rating than dried powder for lotus seed ice cream.

• Korean Journal of Metals and Materials
• /
• v.47 no.11
• /
• pp.716-721
• /
• 2009

The major drive for the application of low-temperature plasma treatment in nitrocarburizing of austenitic stainless steels lies in improved surface hardness without degraded corrosion resistance. The low-temperature plasma nitrocarburizing was performed in a gas mixture of $N_{2}$, $H_{2}$, and carbon-containing gas such as $CH_{4}$ at $450^{\circ}C$. The influence of the processing time (5~30 h) and $N_{2}$ gas composition (15~35%) on the surface properties of the nitrocarburized layer was investigated. The resultant nitrocarburized layer was a dual-layer structure, which was comprised of a N-enriched layer (${\gamma}_N$) with a high nitrogen content on top of a C-enriched layer (${\gamma}_C$) with a high carbon content, leading to a significant increase in surface hardness. The surface hardness reached up to about $1050HV_{0.01}$, which is about 4 times higher than that of the untreated sample ($250HV_{0.01}$). The thickness of the hardened layer increased with increasing treatment time and $N_{2}$ gas level in the atmosphere and reached up to about $25{\mu}m$. In addition, the corrosion resistance of the treated samples without containing $Cr_{2}N$ precipitates was enhanced than that of the untreated samples due to a high concentration of N on the surface. However, longer treatment time (25% $N_{2}$, 30 h) and higher $N_{2}$ gas composition (35% $N_{2}$, 20 h) resulted in the formation of $Cr_{2}N$ precipitates in the N-enriched layer, which caused the degradation of corrosion resistance.

• Korean Journal of Materials Research
• /
• v.33 no.2
• /
• pp.77-86
• /
• 2023

High-temperature oxidation of a Ni-based superalloy was analyzed with samples taken from gas turbine blades, where the samples were heat-treated and thermally exposed. The effect of Cr/Ti/Al elements in the alloy on high temperature oxidation was investigated using an optical microscope, SEM/EDS, and TEM. A high-Cr/high-Ti oxide layer was formed on the blade surface under the heat-treated state considered to be the initial stage of high-temperature oxidation. In addition, a PFZ (γ' precipitate free zone) accompanied by Cr carbide of Cr₂₃C₆ and high Cr-Co phase as a kind of TCP precipitation was formed under the surface layer. Pits of several ㎛ depth containing high-Al content oxide was observed at the boundary between the oxide layer and PFZ. However, high temperature oxidation formed on the thermally exposed blade surface consisted of the following steps: ① Ti-oxide formation in the center of the oxide layer, ② Cr-oxide formation surrounding the inner oxide layer, and ③ Al-oxide formation in the pits directly under the Cr oxide layer. It is estimated that the Cr content of Ni-based superalloys improves the oxidation resistance of the alloy by forming dense oxide layer, but produced the σ or µ phase of TCP precipitation with the high-Cr component resulting in material brittleness.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04a
• /
• pp.148-151
• /
• 2000

$Mg_{2-2x}Ti_xO_2$ films were prepared by e-beam evaporation method to be used as possible substitutes for the conventional MgO protective layer. The oxygen content in the films and in turn, the ratio of metal to oxygen gradually increased with increasing the $TiO_2$ content in the starting materials. The pure MgO films exhibited the crystallinity with strong (111) orientation. The $Mg_{2-2x}Ti_xO_2$ films, however, had the crystallinity with (311) preferred orientation. When the $[TiO_2/(MgO+TiO_2)]$ ratios of 0.1 and 0.15 were used, the deposited films exhibited the secondary electron emission yields improved by 50% compared to that of the conventional MgO protective layer, which resulted in reduction in discharge voltage by 12%.

• Journal of Korea Foundry Society
• /
• v.23 no.2
• /
• pp.86-93
• /
• 2003

It has been a major concern in the foundry that steel castings manufactured by the evaporative pattern casting process encounter the carbon pick-up problem. A carbon rich layer at the evaporative pattern cast surface is a result of interactions between the gaseous products from foamed polystyrene and the molten metal. The carburized layer with a high hardness makes it difficult to machine the casting. In this study, the influence of the density of EPS pattern and coatings on carbon pick-up phenomena of S25C and S45C commercial carbon cast steel were investigated. As the density of EPS pattern is increased, the carbon concentration of decomposed pattern is increased and the thickness of carburized layer at the surface of steel castings is increased. Also as the density of coatings is increased, the permeability of coatings is decreased and the thickness of carburized layer at the surface of steel castings is increased. S25C steel which has lower original carbon content compared to S45C steel exhibited severe carburization.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.2 no.1
• /
• pp.23-34
• /
• 2004

To validate the previous conceptual design of cover system, construction of the engineered barrier test facility is completed and the performance tests of the disposal cover system are conducted. The disposal test facility is composed of the multi-purpose working space, the six test cells and the disposal information space for the PR center. The dedicated detection system measures the water content, the temperature, the matric potential of each cover layer and the accumulated water volume of lateral drainage. Short-term experiments on the disposal cover layer using the artificial rainfall system are implemented. The sand drainage layer shows the satisfactory performance as intended in the design stage. The artificial rainfall does not affect the temperature of cover layers. It is investigated that high water infiltration of the artificial rainfall changes the matric potential in each cover layer. This facility is expected to increase the public information about the national radioactive waste disposal program and the effort for the safety of the planned disposal facility.