• Korean Journal of Materials Research
• /
• v.29 no.10
• /
• pp.586-591
• /
• 2019

This study describes the doping effect of $Yb_2O_3$ on microstructure, electrical and dielectric properties of $ZnO-V_2O_5-MnO_2-Nb_2O_5$ (ZVMN) ceramic semiconductors sintered at a temperature as low as $900^{\circ}C$. As the doping content of $Yb_2O_3$ increases, the ceramic density slightly increases from 5.50 to $5.54g/cm^3$; also, the average ZnO grain size is in the range of $5.3-5.6{\mu}m$. The switching voltage increases from 4,874 to 5,494 V/cm when the doping content of $Yb_2O_3$ is less than 0.1 mol%, whereas further doping decreases this value. The ZVMN ceramic semiconductors doped with 0.1 mol% $Yb_2O_3$ reveal an excellent nonohmic coefficient as high as 70. The donor density of ZnO gain increases in the range of $2.46-7.41{\times}10^{17}cm^{-3}$ with increasing doping content of $Yb_2O_3$ and the potential barrier height and surface state density at the grain boundaries exhibits a maximum value (1.25 eV) at 0.1 mol%. The dielectric constant (at 1 kHz) decreases from 592.7 to 501.4 until the doping content of $Yb_2O_3$ reaches 0.1 mol%, whereas further doping increases it. The value of $tan{\delta}$ increases from 0.209 to 0.268 with the doping content of $Yb_2O_3$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.4
• /
• pp.414-417
• /
• 1992

In order to study the addition effect of Leuconostoc mesenteroides and nisin on Escherichia coli and lactic acid bacteria during fermentation and storage of Kimchi, Kimchi was stored at 4$^{\circ}C$ for 7 days and then in-creased the temperature to $25^{\circ}C$. Lactic acid content on Kimchi fermentation at 4$^{\circ}C$ was maintained initial content which was increased upto 0.9% and lactic bacteria was also increased after switching to $25^{\circ}C$. E. coli, on the other hand, was a little decreased from the initial level, but a significant decrease was found for the those Kimchi of Leuconostoc muenteroides added and nisin treated group when the fermentation temperature was switched to $25^{\circ}C$.

• Korean Journal of Communication Studies
• /
• v.22 no.2
• /
• pp.89-121
• /
• 2014

In order to suggest a strategy for continuous growth of webtoon, this article examined webtoon usage motivation and tried to make a prediction about culture content products and services connected with webtoon, including intention for viewing movies, based on webtoon; intention for switching to paid webtoon content, and intention for buying webtoon character products. From the point of view of Uses and Gratification Theory intentions for using webtoon and human sociocultural behavior intention are already predicted but with the usefulness of Theory of Planned Behavior Integrated Model this study extended the explanation power of prediction about webtoon related behavioral intention. Results found 5 motivational factors for webtoon usage i.e. 'seeking information', 'entertainment and access availability', 'webtoon genre characteristics', 'influence from a friend or acquaintance', and 'escapism and tension release'. Among them the ones that influenced the intention for viewing movies, based on webtoon, were found to be 'webtoon genre characteristics', 'escapism and tension release' and the 3 variables from Theory of Planned Behavior. 'Seeking information', 'entertainment and access availability', 'webtoon genre characteristics', and all the 3 variables from Theory of Planned Behavior were found to influence the intention for switching to paid webtoon content. The intention for buying webtoon based character products was affected by the motivational factors 'seeking information', 'escapism and tension release' and the behavior and subjective norms variables from Theory of Planned Behavior. Based on the uncommon results from the research several suggestions were made for the continuous growth of webtoon.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.319-322
• /
• 2007

In the development of paralleling techniques, Multi-Phase Interleaved(MPI) converter constitutes one of the most promising alternatives reported in the last years. This technique consists of a phase shifting of the control signals of several cells in parallel operating at the same switching frequency. As a result, the aggregated input and output current waveform exhibit lower ripple amplitude and smaller harmonics content than in synchronous or stochastic operation modes. Based on the inherent advantages of the MPI converter, in this paper, a control scheme, which can reduce current and voltage rifle, is proposed for PEMFC generation systems. The MPI boost converter is composed of several identical boost converters connected in parallel.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.19-22
• /
• 2004

A 30-inch WQXGA+ TFT-LCD Monitor has been developed based on in-plane switching mode with multi-domain. This product adopts Cu electrode which, in spite of low resistivity, was not applied to TFT LCD products because of productivity and reliability problems etc. This low resistivity material makes it possible to clear the problem caused by line delay in such high resolution TFT-LCDs. As a results of successful adoption of innovative materials and technologies, our world's largest TFT-LCD Monitor has best performance for high information display.

• Korean Journal of Materials Research
• /
• v.13 no.1
• /
• pp.59-63
• /
• 2003

The microstructural characteristics of $Al_2$$O_3$/Cu composites hot-pressed at different temperatures for atmosphere switching from $H_2$to Ar have been studied. When the composite atmosphere was switched at $1000^{\circ}C$ it led to more homogeneous microstructure than when the atmosphere was switched at $1450^{\circ}C$. The strong sensitivity of Cu to atmosphere, especially the oxygen content in the atmosphere, was found to be responsible for the observed change, based upon the interfacial phenomena related to the formation of $CuAlO_2$. The practical implication of these results is that an optimum processing condition for the design of homogeneous microstructure and stable properties can be established.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.533-536
• /
• 2000

In this paper, we proposed high performance packet forwarding engine for asynchronous transfer mode(ATM) based gigabit routers. The forwarding engine is based on ATM switch and accommodates four 622Mbps ports. The forwarding engine has been designed to be able to process the Intemet protocol(IP) packet at 2.5Gbps using the pipelined If header processing and lookup control mechanism. For high performance packet forwarding, we used content addressable memory(CAM) based routing coprocessor operating in hardware and implemented the pipelined lookup control function into a field programmable gate array(FPGA). The pipelined packet header processing mechanism enhanced the forwarding performance of the If packets ingressed from four different 622Mbps ports. Moreover, the If lookup controller designed to have the performance up to 12.5Mpps. The proposed forwarding engine is also designed to support differentiated services(DS) and multiprotocol label switching(MPLS).

• Journal of Power Electronics
• /
• v.3 no.1
• /
• pp.17-23
• /
• 2003

A new three-phase soft-switching active front-end inverter is presented. The topology consists of a quasi-resonant PWM boost converter with an additional resonant branch, which provides low loss at high frequency operation. This leads to a high conversion efficiency and a remarkable reduction in the siBe of the input inductor. To synchronise the PWM pattern with the resonance cycle, a modified space vector modulation with asymmetrical PWM pattern is used. A high power factor can be achieved for both power flow directions. Due to a new control strategy the converter features a low content of harmonics in the line currents even for distorted line voltages.

• Journal of Engineering Education Research
• /
• v.23 no.6
• /
• pp.60-67
• /
• 2020

This study was conducted to understand the experiences of engineering college professors teaching classes online due to COVID-19. Instructional strategies were proposed based on these results. This study qualitatively analyzed interviews of four engineering college professors who switched from teaching classes offline to teaching them online in the first semester of 2020. The results showed that the professors had difficulties in creating video content, interacting with students, and conducting online assessments. The results also showed that the professors had difficulties in switching to online teaching. This study was significant in that it produced empirical data about online teaching based on the experiences of engineering college professors teaching classes online.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.146-150
• /
• 2001

A new three-phase soft-switching active front-end inverter is presented. The topology consists of a quasi-resonant PWM boost converter with an additional resonant branch, which provides low loss at high frequency operation. This leads to a high conversion efficiency and a remarkable reduction in the size of the input inductor. To synchronise the PWM pattern with the resonance cycle, a modified space vector modulation with asymmetrical PWM pattern is used. A high power factor can be achieved for both power flow directions. Due to a new control strategy the converter features a low content of harmonics in the line currents even for distorted line voltages.