• Advances in Computational Design
• /
• 제8권3호
• /
• pp.237-253
• /
• 2023

Torque ripple content and variable switching frequency operation of conventional direct torque control (DTC) are reduced by the integration of space vector modulation (SVM) into DTC. Integration of space vector modulation to conventional direct torque control known as SVM-DTC. It had been more frequently used method in renewable energy and machine drive systems. In this paper, SVM-DTC is used to control the rotor side converter (RSC) of a wind driven doubly-fed induction generator (DFIG) because of its advantages such as reduction of torque ripples and constant switching frequency operation. However, flux and torque ripples are still dominant due to distorted current waveforms at different operations of the wind turbine. Therefore, to smoothen the torque profile a Neural Network Controller (NNC) based SVM-DTC has been proposed by replacing the PI controller in the speed control loop of the wind turbine controller. Also, stability analysis and simulation study of DFIG using process reaction curve method (RRCM) are presented. Validation of simulation study in MATLAB/SIMULINK environment of proposed wind driven DFIG system has been performed by laboratory developed prototype model. The proposed NNC based SVM-DTC yields superior torque response and ripple reduction compared to other methods.

• The Korean Journal of Ceramics
• /
• 제6권2호
• /
• pp.110-115
• /
• 2000

$SrBi_2Ta_2O_9$ thin films were deposited at room temperature on the usual (111) oriented Pt bottom electrodes using r.f. magnetron sputtering, and then post-annealed at 650-$800^{\circ}C$ for 30min in oxygen flow. Low temperature processing which shows the preferred oriented SBT thin films was obtained by controlling the sputtering pressure and/or Sr content in target. The orientation and grain growth behavior of SBT thin films were dependent on Sr contents in films. With increasing the excess Bi content up to 50% in SBT thin films, it was possible to lower the onset temperature of grain growth. The c-axis preferred oriented SBT thin films were well-grown under the condition of low post-annealing($650^{\circ}C$) by lowering post-annealing pressure. After $10^{11}$ switching cycles, no polarization degradation was observed in both preferred oriented SBT capacitors.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.9-12
• /
• 1998

Film characteristics of thin reoxidized nitrided oxides were investigated by SIMS analysis and C-V method in order to use the gate dielectric for charge-trap type NVSMs instead of ONO stacked layers. Nitric oxide(NO) annealed film has the nitrogen content sharply peaked at the Si-SiO$_2$ interface, while it is broad for nitrous oxide($N_2$O) ambient. The nitrogen peak concentration increased with anneal temperature and time. The position of nitrogen content in the oxide layer was due to be precisely controlled. For the films annealed NO ambient at 80$0^{\circ}C$ for 30min. followed by reoxidized at 85$0^{\circ}C$, the maximum memory window of 3.5V was obtained and the program condition was +12V, 1msec for write and -l3V, 1msec for erase.

• Asian-Australasian Journal of Animal Sciences
• /
• 제4권1호
• /
• pp.25-29
• /
• 1991

Performance and production of twenty lactating Holstein cows fed diets containing either soybean meal or fish meal as the primary protein source were compared in a continuous or split feeding scheme. At 1 wk prepartum four groups of five animals were placed on each experimental diet. Animals assigned to the continuous feeding scheme were continued on these diets for 10-wk postpartum. At 4 wk postpartum, the diets for the groups assigned to switching protein sources were changed. These treatments were continued for another 6 wk. Milk production and dietary intakes were recorded daily. Milk constituents were measured every 2 d. Cows weights, rumen fluid samples and jugular blood samples were collected weekly. Data showed no effect of early lactation diet on cow performance or milk characteristics. Overall, compared to the soybean meal diet, the fish meal diet lowered the milk fat percent and increased production of milk per unit of dry matter ingested. No differences were observed for volatile fatty acid content of rumen fluid, blood mineral content, milk protein, somatic cell count, 4%-fat corrected milk, dry matter intake, or body weight.

• 한국CDE학회논문집
• /
• 제13권2호
• /
• pp.77-88
• /
• 2008

Nowadays personal users create a variety of multi-media contents and share them with others through various devices over the Internet since the concept of user created content (UCC) has been widely accepted as a new paradigm in today's multi-media market, which has broken the boundary of contents providers and consumers. This paradigm shift has also introduced a new business model that makes it possible for them to create their own multi-media contents for commercial purpose. This paper proposes a tangible virtual studio using augmented reality to author multi-media contents easily and intuitively for personal broadcasting and personal content generation. It provides a set of tangible interfaces and devices such as visual markers, cameras, movable and rotatable arms carrying cameras, and miniaturized set. They can offer an easy-to-use interface in an immersive environment and an easy switching mechanism between tangible environment and virtual environment. This paper also discusses how to remove inconsistency between real objects and virtual objects during the AR-enabled visualization with a context-adaptable tracking method. The context-adaptable tracking method not only adjusts the locations of invisible markers by interpolating the locations of existing reference markers, but also removes a jumping effect of movable virtual objects when their references are changed from one marker to another.

• 한국전기전자재료학회논문지
• /
• 제15권9호
• /
• pp.764-769
• /
• 2002

The effect of excess Bi contents on the ferroelectric properties of B $i_{3.25}$ L $a_{0.75}$ $Ti_3$ $O_{12}$ (BLT) thin films has been investigated. Bismuth lanthanum titanate thin films with excess Bi contents were prepared onto Pt/Ti/ $SiO_2$/Si substrate by metalorganic decomposition (MOD) technique. The structure and morphology of the films were analyzed using X-ray diffraction (XRD) and atomic force microscopy (AFM), respectively. From the XRD analysis, BLT thin films show polycrystalline structure and the layered-perovskite phase was obtained over 10% excess of Bi contents. As a result of ferroelectric characteristics related to the Bi content of the BLT thin film, the remanent polarization and dielectric constant decreased with increasing over Bi content of 10% excess. The BLT film with Bi content of 10% excess was measured to have a dielectric constant of 326 and dielectric loss of 0.024. The BLT thin films showed little polarization fatigue test up to 3.5$\times$10$^{9}$ bipolar switching cycling.

• 한국전자통신학회논문지
• /
• 제18권6호
• /
• pp.1073-1080
• /
• 2023

인터넷 네트워크의 발전과 속도 개선, 이를 배경으로 한 각종 플랫폼의 발전은 다양한 콘텐츠의 생산과 소비의 급속한 확장을 불러왔다. 하지만 기존의 IP를 기반으로 한 인터넷 체계는 이런 급속한 데이터의 증가에 효율적으로 대처할 수 없는 현황이다. 이에, 콘텐츠 중심 네트워크(CCN, Contents Centric Network)라는 대안이 등장해 호스트 중심이 아닌 콘텐츠를 중심으로 보다 효율적인 데이터 송수신이 가능해졌다. 본 논문에서는 CCN의 주요 연구 분야 중 하나인 실시간 스트리밍 서비스에서의 중간노드 이동성에 대해 다룰 것이며, RSSI 감지를 통한 보다 효율적인 경로 전환을 통해 네트워크 과부하를 최소화할 것이다. 즉, 정보요청자와 정보제공자 사이에 위치한 중간노드가 이동했을 때 예비 경로를 선택하고 전환하는 방법을 개선함으로써 데이터 전송의 단절은 없으면서도 네트워크에 경로 전환으로 인한 불필요한 부하가 발생하지 않도록 관리하는 매커니즘을 제안한다.

• 한국재료학회지
• /
• 제34권3호
• /
• pp.152-162
• /
• 2024

In this study, we introduce a novel TiN/Ag embedded TiO₂/FTO resistive random-access memory (RRAM) device. This distinctive device was fabricated using an environmentally sustainable, solution-based thin film manufacturing process. Utilizing the peroxo titanium complex (PTC) method, we successfully incorporated Ag precursors into the device architecture, markedly enhancing its performance. This innovative approach effectively mitigates the random filament formation typically observed in RRAM devices, and leverages the seed effect to guide filament growth. As a result, the device demonstrates switching behavior at substantially reduced voltage and current levels, heralding a new era of low-power RRAM operation. The changes occurring within the insulator depending on Ag contents were confirmed by X-ray photoelectron spectroscopy (XPS) analysis. Additionally, we confirmed the correlation between Ag and oxygen vacancies (V_o). The current-voltage (I-V) curves obtained suggest that as the Ag content increases there is a change in the operating mechanism, from the space charge limited conduction (SCLC) model to ionic conduction mechanism. We propose a new filament model based on changes in filament configuration and the change in conduction mechanisms. Further, we propose a novel filament model that encapsulates this shift in conduction behavior. This model illustrates how introducing Ag alters the filament configuration within the device, leading to a more efficient and controlled resistive switching process.

• Journal of Information Processing Systems
• /
• 제12권4호
• /
• pp.612-630
• /
• 2016

As mobile augmented reality technologies are spreading these days, many users want to produce augmented reality (AR) contents what they need by themselves. To keep pace with such needs, we have developed a mobile AR contents builder (hereafter referred to as MARB) that enables the user to easily connect a natural marker and a virtual object with various interaction events that are used to manipulate the virtual object in a mobile environment so that users can simply produce an AR content using natural photos and virtual objects that they select. MARB consists of five major modules-target manger, virtual object manager, AR accessory manager, AR content manager, and AR viewer. The target manager, virtual object manager and AR accessory manager register and manage natural target markers, various virtual objects and content accessories (such as various decorating images), respectively. The AR content manger defines a connection between a target and a virtual object with enabling various interactions for the desired functions such as translation/rotation/scaling of the virtual object, playing of a music, etc. AR viewer augments various virtual objects (such as 2D images, 3D models and video clips) on the pertinent target. MARB has been developed in a mobile application (app) format in order to create AR contents simply using mobile smart devices without switching to a PC environment for authoring the content. In this paper, we present the detail organizations and applications of MARB. It is expected that MARB will enable ordinary users to produce diverse mobile AR contents for various purposes with ease and contribute to expanding the mobile AR market based on spread of a variety of AR contents.

• 한국의류학회지
• /
• 제33권12호
• /
• pp.1991-2001
• /
• 2009

본 연구는 상표전환 관련 마케팅전략 수립에 필요한 기초정보를 제공하고자, 패션제품 소비자의 상표 전환동기를 품목별로 고찰 비교하였다. 질문서를 이용한 조사연구법에 의해 이루어졌으며, 자료수집 기간은 2008년 5월~6월이었고, 총 4개 패션품목에 대한 184부의 응답자료가 요인분석, Cronbach's alpha coefficients, ANOVA 및 Duncan test에 의해 이루어졌다. 패션제품의 기능/미적 동기 및 상황적 동기와, 소비자의 사회/정서적 호기심 동기 측면에서의 상표전환동기가 패션제품 품목에 따라 유의한 차이가 있음이 확인되었다. 전체적으로, 기능/미적 요인들이 상표전환에 기여하는 정도는 청바지와 재킷의 경우가 구두와 운동화보다 더 높았다. 기능/미적 측면의 동기와 관련된 모든 변수 중 사이즈의 영향력이 가장 높게 나타나, 패션제품 소비자의 상표전환 관련 마케팅전략에는 제품 사이즈에 대한 관심이 매우 필요함을 시사하였다. 대체로 상황적 요인도 신발보다 의복의 경우에 상표전환동기로 더 많이 작용하였다. 그러나 디스카운트/쿠폰 제공 등의 촉진전략 변수가 상표전환동기로 기여하는 정도는 청바지가 운동화와 구두 및 재킷보다 낮게 나타났다. 한편 판매자의 조언능력이나 품절상황이 상표전환동기로 가장 높게 기여하는 품목은 재킷인 것으로 나타났다. 친구의 조언이나 변화에 대한 욕구 및 타 브랜드에 대한 호기심 등의 소비자 특성 관련 변수가 상표전환동기로 기여하는 정도는 신발류의 경우가 의류에서보다 더 높은 것으로 나타났다. 이러한 상표전환동기의 차이는 패션제품 품목에 따라 차별화된 상표전환 관련 마케팅전략의 필요성을 보다 구체적으로 보여주고 있다고 판단된다. 아울러, 본 연구의 한계점으로 남은 연령과 성별에 따른 각 제품의 상표전환동기에 대한 연구가 뒤따라야 할 것으로 사료된다. 또한 상표전환의 정도를 보다 효율적으로 측정할 수 있는 도구의 개발이 이루어져서 보다 다양한 측면의 상표전환동기 연구가 이루어져야 할 것으로 사료된다.