• Special Issue of the Society of Naval Architects of Korea
• /
• 2005.06a
• /
• pp.15-21
• /
• 2005

In this paper, the procedure of generation and application of nonlinear wave loads for structural design of large container carrier was described. Ship motion and wave load was calculated by modified strip method. Pressure acting on wetted hull surface was calculated taking into account of relative hull motion to the wave. Design wave height was determined based on the most sensitive wave length considering rule vertical wave bending moment at head sea or fellowing sea condition. And the enforced heeling angie concept which was introduced by Germanischer Lloyd (GL) classification had been used to simulate high torsional moment in way of fore hold parts similar to actual sea going condition. Using wave load generated from this dynamic load calculation, FE analyses were performed. With this result, yielding, buckling, hatch diagonal deflection and fatigue strength of hatch corners were reviewed based on the requirement of GL classification. The results of FE analysis show good compatibility with GL classification.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.3
• /
• pp.187-197
• /
• 2015

This study aims the development of a semi-analytic method for the parametric roll of large containerships advancing in longitudinal waves. A 1.5 Degree-of-Freedom(DOF) model is proposed to account the change of transverse stability induced by wave elevations and vertical motions (heave and pitch). By approximating the nonlinearity of restoring moment at large heel angles, the magnitude of roll amplitude is predicted as well as susceptibility check for parametric roll occurrence. In order to increase the accuracy of the prediction, the relationship between righting arm(GZ) and metacentric height(GM) is examined in the presence of incident waves, and then a new formula is proposed. Based on the linear approximation of the mean and first harmonic component of GM, the equation of parametric roll in irregular wave excitations is introduced, and the computational results of the proposed model are validated by comparing those of weakly nonlinear simulation based on an impulse-response-function method combined with strip theory. The present semi-analytic doesn’ t require heavy computational effort, so that it is very efficient particularly when numerous sea conditions for the analysis of parametric roll should be considered.

• Journal of Korea Trade
• /
• v.23 no.4
• /
• pp.1-16
• /
• 2019

Purpose - This research empirically proves that global shipbuilding industry leadership has moved to China from Korea. Design/Methodology - Competitiveness is measured by AHP for the weights of comprehensive competitiveness, which is the output mixture of three attributive factors: shipbuilding technology, shipbuilding contract price, and export credit. Findings - China is far ahead of Korea for standard vessels such as bulkers and containerships with competitiveness weights of 0.762 and 0.612, respectively, against 0.238 and 0.388 of Korea. Korea is maintaining its competitiveness only in LNG carriers (174k CBM) with a competitiveness weight 0.621. China and Korea have similar competitiveness for chemical carriers, complex vessels with a small hull size. The sources of Chinese competitiveness are shipbuilding contract price and export credit. With the majority share of standard vessel types in the world fleet, China will hold a bigger market share than Korea in the global shipbuilding industry in the forthcoming years. Implications - The swing factors of market power are shipbuilding technology and contract price. If China fails to further develop shipbuilding technology for shipowners worried about the reliability of the Chinese-built vessels, shipowners may swing back to Korea. The rising Chinese labor cost will expedite this swing in the forthcoming competition. Originality/value - To the best of the author's knowledge, this is the first paper that quantitatively examines the competitiveness of shipbuilding between China and Korea by comparing attributive factors for competitiveness.

• Journal of the Korea Convergence Society
• /
• v.8 no.10
• /
• pp.19-28
• /
• 2017

Recently the cargo transportation is increasing according to lager containerships in the container terminal. Thus, the various ways(such as efficient vehicle scheduling and minimizing delay time) are applied to increase productivity to handle the increasing cargo transportation in the container terminal. In this paper, the optimized model(Solvers) is applied to improve the existing heuristic method as a way of increasing productivity. The experimental design is that the result of two objective functions(minimizing travel and delay time of the empty vehicle) is compared to the result of the existing heuristic method by six sample problems. As a result of the two objective function experiments, the optimized model draws 5.3% more improved performance than the heuristic method in four of six problem samples.

• Journal of Navigation and Port Research
• /
• v.30 no.8 s.114
• /
• pp.617-622
• /
• 2006

Gamcheon Harbor was developed to cope with increased freight demand of Busan port and supplement function of the north port. Because container wharf is opened to 1997 as well as general wharf, present maximum 50,000DWT class containerships have been incoming and outgoing. However, In Gamcheon port, small size ships such as fishing boats, miscellaneous boats account for 50 percent of the traffic and a public marine products wholesale market that is building on the north wharf will open in 2008. Therefore, it needs to grasp future year traffic volume before establishing operation plan for port management. Also, analysis on crossing situation risk is required because the breakwater entrance in Gamcheon Harbor is narrow and the crossed passing of ship is ever-present at breakwater front. Thus the traffic volume in the future was presumed and quantitative analysis was achieved on crossing situation though simulations with the traffic volume.

• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.421-429
• /
• 2005

Traditionally, determination of the optimal containership size is the most important factor for competitiveness of shipping companies in the shipping market. Under this environment, many shipping companies and researchers have studied about it. The objective of this research is to determine the optimal containership size using a total shipping cost in the main trunk lines. Total shipping cost is calculated at the ground of capital costs, vessel operation costs, voyage costs, port charges and miscellaneous costs for 'Europe-Far East', 'Far East-North America' and 'Europe-Far East-North America' services. Analysis results showed that the 6,500TEU containership is an optimal size on the 'Europe-Far East' and 'Europe-Far East-North America' services. And the 8,200TEU containership is an optimal size on the 'Far East-North America' service. Moreover, if the larger containerships over 8,200TEU class start operation afterward, it would be less competitive in the analyzed 3services.

• Journal of Korea Port Economic Association
• /
• v.24 no.2
• /
• pp.131-154
• /
• 2008

The purpose of this paper is to verify the financial validity of dredging the port of Busan with the change of global port logistics circumstances. In order to do so, NPV, IRR, B/C ratio, DPP techniques are adopted. The whole dredging at Northern port area is supposed to be negative at the depth of 16m water. Based upon its financial validity, however, the priority is Shinsundae (option 1) followed by Shinsundae (option 1) and Gamman (option 1), Shinsundae (option 1) and Gamman (option 2), Shinsundae (option 2) and Gamman (option 2), Shinsundae (option 2) and Gamman (option 2) and ShinGamman in sequence. In addition to this, Busan New port is considered to be the positive financial validity at the dredging of 16m water depth. This is because the ultra containerships of over 8,000TEU are trying to call at the port and Hanjin shipping and Hyundai Merchant shipping companies which are now the most significant customers in Northern port are scheduled to divert it.

• Journal of Navigation and Port Research
• /
• v.30 no.6 s.112
• /
• pp.465-470
• /
• 2006

Nowadays, vessel's size is tending to bigger, Therefore port facilities are developed according to this trend, which has been shown in the competition of Hub-Port among the main ports such as Port of Busan and Port of Shanghai. However there are the limited number of large containerships more specifically so 70% of the total ships calling at Busan Port are small and medium sized ships which are less than 20,000 ton As a result, it is necessary to consider the handling facilities of these ships which had been disregarded The big size of facilities increases handling cost bemuse of high investment so it is possible for small and medium sized ships to have disadvantages financially and avoid calling. In this paper, we estimate the propriety of utilization of crane and labor according to the size of vessels after analyzing time value cost, reflecting the size of vessels, size and number of crane and labor structure, and container handling cost value.

• Journal of Korean Society of Transportation
• /
• v.19 no.6
• /
• pp.75-87
• /
• 2001

Inter-port competition is fiercer than in the past because of technological evolution in transport systems : the increasing side of containerships implies only a few calls in three or four ports at each end of the trade and the rest of the traffic being served by smaller feederships. It is therefore essential for big ports to be selected as one of these calls by the main shipowners, consortia and alliances to avoid rmarginalisation. In order to compete effectively, many ports have been obliged to modernise and extend considerably its existing ports or to build new port facilities. With the advent of major environmental legislation around the world, however, amenities such as fish and wildlife, clean air and water, access to the waterfront, and view protection took on greater importance. Ports are now being forced to incorporate environmental considerations into their planning and management functions in order to avoid additional costs or timing delays. The aim of this paper is to analyse the port value by which port comparison(or selection) will be made with HFP(Hierarchical Fuzzy Process) method. This was done by extracting and grouping the evaluation factors of port value by port experts : facility and location factor, logistics service factor environment and amenity factor, city and economic factor, and human and system factor. For empirical test of this method, 6 major ports in Northeast Asia were chosen and analysed. The order of importance for five evaluation factors were 1) facility and location factor 2) logistics service factor 3) human and system factor, 4) city and economic factor, and 5) environment and amenity factor. This means that geographical location and logistics services are still being considered as the most important factor to call the port by port users. even though environment and amenity factor shows relatively low figure. Among 6 major ports, Port of Kobe was ranked the first position in a comprehensive evaluation, while Ports of Busan and Kwangyang were 4th and 5th respectively. This implies that Port of Busan should make much efforts to enhance the existing facilities as well as management system.

• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.781-786
• /
• 2010

In this study, a new concept of ocean transport system, called the mobile harbor serving for a short distance transport of containers with cargo handling cranes between mother containerships and coastal ports, is introduced. Instead of direct berthing a very large containership at the coastal port, Mobile Harbor is moving to the offshore mooring basin with enough water depth condition. Therefore, investigation of the coastal environment, technical condition and limitation of the domestic trade ports for the application of Mobile Harbor, is essential process. To figure out the accessibility of mobile harbor, the environmental conditions, the cargo handling capacity and marine traffic volume and flow pattern has been analyzed with the tools for marine traffic simulation and virtual navigation aids system. The most proper Mobile Harbor mooring areas among trade ports of the south and east coast are selected by analyzing the obtained information and evaluating its application: (1) Under natural environmental conditions such as air and sea weather, three candidate areas are selected such as Masan port, Ulsan port, and Busan(New port) port. (2) Under marine traffic and appropriateness of water facilities, three candidate areas are selected as Mokpo port, Busan(New port) port, and Donghae & Mookho port (3) For a region-based analysis considering handling capacity and the local managed trade ports in vicinity, three candidate areas are selected as Busan region, Yosu & KwangYang region, and Mokpo region. Through this study, the basic guideline for selection of optimum trade port and offshore mooring basin for mothership and Mobile Harbor is recommended. In order to apply the Mobile Harbor to the real water, navigaton aids as the virtual route identification with AIS must be introduced for maritime safety in the vicinity of Mobile Harbor area which berthing and cargo handling is being conducted.