• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.1096-1110
• /
• 2014

Whipping/springing research started in the 50'ies. In the 60'ies inland water vessels design rules became stricter due to whipping/springing. The research during the 70-90'ies may be regarded as academic. In 2000 a large ore carrier was strengthened due to severe cracking from North Atlantic operation, and whipping/springing contributed to half of the fatigue damage. Measurement campaigns on blunt and slender vessels were initiated. A few blunt ships were designed to account for whipping/springing. Based on the measurements, the focus shifted from fatigue to extreme loading. In 2005 model tests of a 4,400 TEU container vessel included extreme whipping scenarios. In 2007 the 4400 TEU vessel MSC Napoli broke in two under similar conditions. In 2009 model tests of an 8,600 TEU container vessel container vessel included extreme whipping scenarios. In 2013 the 8,100 TEU vessel MOL COMFORT broke in two under similar conditions. Several classification societies have published voluntary guidelines, which have been used to include whipping/springing in the design of several container vessels. This paper covers results from model tests and full scale measurements used as background for the DNV Legacy guideline. Uncertainties are discussed and recommendations are given in order to obtain useful data. Whipping/springing is no longer academic.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권5호
• /
• pp.466-474
• /
• 2016

The model tests results for the original lines of an 10000TEU container vessel show that the delivered power is higher and could not satisfy the requirement of energy saving effects and design targets. In this paper, the lines optimization of the 10,000 twin-skeg container vessel was carried out by parametric modeling and CFD simulations. At first, the CFD methods for twin-skeg hull form were validated by the comparison with the experimental results. Then more than one hundred parameters were adopted for the establishment of the fully parametric model. Based on the parametric model of the twin-skeg container vessel, the preliminary optimization was carried out by tight coupling of FRIENDSHIP-FRAMEWORK with potential flow of SHIPFLOW. Then several important parameters related to the after part of twin-skeg vessel were investigated by viscous flow computation. The final optimized variant PM11, which the total resistance was reduced by about 8.3% in model scale, is obtained within the constraints of general arrangement. And the model tests for variant PM11 was carried out in CSSRC, which shows that the resistance of optimized variant PM11 is decreased by about 8.6%.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.496-506
• /
• 2014

In this paper the scenario based optimization of the bulbous bow of the KRISO Container Ship (KCS) is presented. The optimization of the parametrically modeled vessel is based on a statistically developed operational profile generated from noon-to-noon reports of a comparable 3600 TEU container vessel and specific development functions representing the growth of global economy during the vessels service time. In order to consider uncertainties, statistical fluctuations are added. An analysis of these data lead to a number of most probable upcoming operating conditions (OC) the vessel will stay in the future. According to their respective likeliness an objective function for the evaluation of the optimal design variant of the vessel is derived and implemented within the parametrical optimization workbench FRIENDSHIP Framework. In the following this evaluation is done with respect to vessel's calculated effective power based on the usage of potential flow code. The evaluation shows, that the usage of scenarios within the optimization process has a strong influence on the hull form.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2006년도 추계학술발표회
• /
• pp.303-308
• /
• 2006

이 연구의 목적은 부산항에 입항하는 대형 콘테이너 선박의 안전 접안 조종을 위한 한계풍속을 설정하는데 있다. 계산결과, 정상풍속 13.5m/sec 이하의 바람에서는 예선 4500H.P.의 Z. peller 2척을 이용하여 안전 접안 조선하는데 큰 위험이 없음을 알았다. 그러나 돌풍율 25%를 포함한 강풍 16.9m/sec 이상의 기상상태에서는 선박조종이 위험하게 됨을 알았고, 돌풍율을 포함하여 풍속이 16.9m/sec 에 달하는 강풍하에서 대형 콘테이너 선박을 부득이 접안 조종할 때는 4500 H.P.Z. peller 3척으로 조선보조를 받아야 함을 알았다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.261-264
• /
• 2000

Two hull forms of 2, 500 TEU Container Vessel, designed by Daedong Shipbuilding CO., LTD. were tested at the Circulating Water Channel of Chosun University for the evaluation of resistance performance. The test results of resistance, wave profile measurement and trim-sinkage measurement are compared in the form of diagrams and figures, and the results are discussed. A conclusion is drawn that the performance of modified form (model number : CU-201F2A2) is improved about 8% resistance performance at the design speed compare with original form (model number : CU-201F1A1).

• 방사성폐기물학회지
• /
• 제5권2호
• /
• pp.155-169
• /
• 2007

월성 원자력 발전소의 TRF 시설에서 수집된 트리튬을 metal hydride 형태로 보관하고 있는 500 kCi급 트리튬 1차 저장용기를 발전소 밖의 폐기물 저장고로 안전하게 운반하기 위하여 트리튬 운반용기를 개발하였다. B형 운반용기의 기술기준을 적용하여 구조평가, 열평가, 방사선차폐평가, 격납평가 등을 수행하여 운반용기의 안전성을 분석하였다. 트리튬 운반용기는 정상운반조건 및 사고운반조건에서도 격납 경계가 손상되지 않는다고 평가되었다. 붕괴열로 인한 운반용기 내부 저장용기의 온도상승은 수치해석 결과, 원통형 모델에서는 $134.8^{\circ}C$로 나타났다. 운반사고 조건에 대한 열 평가로서 $800^{\circ}C$ 외부환경에 30분간 노출되었을 경우에는 단열재만의 열차폐를 고려하여 계산한 결과, 약 $405^{\circ}C$로 나타났으며, 내부 온도 상승은 1차 격납 경계인 1차 저장용기의 허용 온도인 $550^{\circ}C$에도 미치지 못하였다. 격납 차폐 평가에서도 사고조건인 $800^{\circ}C$의 외부 환경에 노출된 경우에서도 충분히 운반용기의 격납 성능을 유지할 수 있다고 판단되었다. 방사선에 대한 차폐 특성을 조사한 결과, 트리튬에서 발생된 ${\beta}-ray$ 선량은 1차 저장용기 외부 표면에서 0으로 계산되었다. 이상과 같이 500 kCi 급 트리튬 운반용기에 대한 안전성을 평가한 결과, 운반사고조건에서도 트리튬 운반용기는 전혀 이상이 없는 것으로 나타났다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 공동학술발표회
• /
• pp.246-246
• /
• 2017

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.90-95
• /
• 2004

Ail of the world, unification and extension of market enlarged scale of international commerce. Thus, not only production but also circulation of goods is brought into relief and transportation of most freights is performed using container. Container vessels are equipped with marry kinds of securing equipments such as Lashing, twistlock. Lashing is installed mainly in container vessel for the container stack with more than 3 containers. Damage of containers often arise from irrelevant lashing arrangement and bring economical loss. Much time and cost is requested for the Calculation of forces on container and determination of lashing arrangement In this study, We developed lashing analysis simulator which performs calculation and presenst relevant lashing arrangement. It will provide more convenient and efficient environment for lashing analysis.

• 대한조선학회논문집
• /
• 제46권5호
• /
• pp.520-526
• /
• 2009

Efficient stowage plan is required for handling large number of containers in a container terminal. Before a ship enters port, most of container terminals prepare a stowage plan based on information received from the shipping company. If this information does not have the accurate information of containers in the vessel, the stowage plan might be often changed or sometimes it becomes useless. In order to avoid this problem, we apply RFID system in the container ship and we propose a framework for communication between ships and terminals using RFID and Web Services technology.

• 대한조선학회논문집
• /
• 제58권6호
• /
• pp.366-374
• /
• 2021

This paper presents the analysis of the speed-power performance in the real sea using a large container vessel data provided as a test bed from a shipping company. To perform a speed trial of the vessel during a commercial voyage, the on-board measuring device and various operation data acquisition systems were mounted on the vessel for long-term performance monitoring and the voyage operated under the container loading condition close to the design draft was adopted. The content of this paper consists of Part I and Part II. Part I, such as this paper, contains the speed trial method and analysis results of the operating vessel. Part II contains the analysis of the speed-power characteristics change over time and before and after hull cleaning using operation data measured from the voyage operated under a condition similar to the speed trial.